Solid State High Power Amplifier 250 kHz - 1000 MHz, Wide Instantaneous Bandwidth, Built-in protection Broadband Series: PA1067 FEATURES Wideband. Agile. Powerful. Compact. Class AB linear LDMOS design 250 kHz - 1000 MHz 10 Watt output power 40 dB gain 28 Volt operation Suitable for all modulations standards Spectrum management. Fully protected – load VSWR, input overdrive, over/under supply voltage, overcurrent The first task is to get your message through. The second is to prevent the other guy from getting his message through. The MtronPTI PA1067 Solid State Power Amp provides a minimum of 10 Watts of CW power across the full bandwidth and less than 4.0 dBP-P gain flatness to meet the needs of broadband spectrum control. With full power operation from 250 kHz to 1000 MHz and built in VSWR protection, the PA1067 has 40 dB of gain, perfect for standalone, array or TWT driver applications. APPLICATIONS Broadband jamming Electronic warfare EMI / EMC test equipment MtronPTI’s line of Solid State Power Amplifiers is backed by a multi-national design and manufacturing team with more than 150 years combined PA design experience. MtronPTI’s continuing focus on client service ensures full program life engineering support from specification to production to next generation architecture planning. Like all MtronPTI’s SSPAs, the PA1067 is also available integrated with power supply, cooling and communications interface as a rack mountable unit for laboratory or fixed location applications. EA-6B Prowler – U.S. Navy photo by Photographer’s Mate 3rd Class Martion S. Fuentes. (RELEASED) Copyright © 2015 MtronPTI. All rights reserved. Rev. 20150317 | Page 1 of 2 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000 PA1067 Data Sheet Electrical Characteristics Parameter PASSBAND Operating Frequency Range Power Output Small Signal Gain Power Gain Flatness Input Return Loss 2-tone Intermodulation (IMD) Harmonics Non Harmonic Spurious Power Operating Voltage Current Consumption Max Input Power Load VSWR Protection Symbol Min. FCARRIER POUT_MIN ARF_MIN 0.25 10 40 Typ. Max. Units 1000 -60 MHz Watts dB dBP-P dB dBc dBc dBc 30 2 +10 VDC A dBm Max. +75 +85 95 Units °C °C % mm gr. 4.0 RLIN 10 -30 -20 VDD IDD PIN_MIN 28 Comment CW ARF_MAX – ARF_MIN Within the FSIG bandwidth into 50Ω 30 dBm/tone, ∆ = 1 MHz At rated POUT Without damage ∞:1 Environmental & Physical Parameter Operating Case Temperature Storage Temperature Relative Humidity Dimensions Weight RF Connectors IN / OUT DC Power / Interface Connector Cooling D-Sub Connector Pin Assignments 1 FWD 2 VVA 3 Current Sensor 4 Temperature Sensor 5 Shutdown 6, 7 VDD 8, 9 GND Symbol TOC TSTR Min. -20 -40 5 Typ. 125 x 63 x 27 300 SMA female 9-pin Hybrid D-Sub External Heat Sink Comment Non-condensing Excluding connectors Forced air required N/A Option 103 – Analog Gain Control ID @ 50 mV / 100 mA typ. VT @ 10 mV / °C + 500 mV typ. TTL 28 VDC Ground Case Outline (Standard) Revision History Date 20150317 Rev. A Orig. DPD Details of Revision Initial release in 2015 format Information provided by MtronPTI is believed to be accurate and reliable. However, no responsibility is assumed by MtronPTI for its use nor for any infringements or patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MtronPTI. MtronPTI may change specifications without notice to improve end application performance or product manufacturability. Contact MtronPTI for the most up-to-date information. Copyright © 2015 MtronPTI. All rights reserved. Rev. 20150317 | Page 2 of 2 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000