Outline Dimensions www.vishay.com Vishay Semiconductors True 2 Pin TO-220 DIMENSIONS in millimeters and inches 0.002" 0.05 mm A A E ØP F B Q H1 D Term. 4 0.150" REF. 45° Ø 2.0 mm REF. L1 b1 L b c 60° 1 2 J1 e SYMBOL MILLIMETERS INCHES MIN. MAX. MIN. MAX. A 4.32 4.57 0.170 0.180 b 0.71 0.91 0.028 0.036 b1 1.15 1.39 0.045 0.055 c 0.36 0.53 0.014 0.021 D 14.99 15.49 0.590 0.610 E 10.04 10.41 0.395 0.410 e 5.08 BSC 0.200 BSC F 1.22 1.37 0.048 0.054 H1 5.97 6.47 0.235 0.255 J1 2.54 2.79 0.100 0.110 L 13.47 13.97 0.530 0.550 L1 (1) 3.31 3.81 0.130 0.150 ØP 3.79 3.88 0.149 0.153 Q 2.60 2.84 0.102 0.112 Notes (1) Lead dimension and finish uncontrolled in L 1 • These dimensions are within allowable dimensions of JEDEC TO-220AB rev. J outline dated 3-24-87 • Controling dimension: Inch Revision: 05-Dec-12 Document Number: 95259 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000