Model # TM9346 Available as: TM9346, 4 Pin TO-8 (T4) TN9346, 4 Pin 0.450” Sq. Surface Mount (SM3) BX9346, SMA Connectorized Housing (H1L) RF/Microwave Amplifier Features • Low Noise Figure: 2.7 dB • Broad 10 to 3600 MHz Bandwidth • Environmental Screening Available • Unconditionally Stable Typical Intermodulation Performance at 25 ºC Technical Specifications TYPICAL Ta = +25 ºC MIN/MAX Ta = -55ºC to +85 ºC Frequency 10 to 3600 MHz 10 to 3000 MHz Gain (dB) 10.5 9.5 Min. Power @ 1 dB Comp. (dBm) * +16 +15 Min. Reverse Isolation (dB) -17 -- In 1.5:1 2.0:1 Max. Out 1.5:1 2.0:1 Max. Noise Figure (dB) 1000-3000 MHz 200-1000 MHz 2.7 3.5 4.0 Max 5.5 Max Power Vdc +15 +15 mA 56 65 Max. Characteristic VSWR Second Order Harmonic Intercept Point: +41 dBm (Typ.) Second Order Two Tone Intercept Point: +35 dBm (Typ.) Third Order Two Tone Intercept Point: +27 dBm (Typ.) Note: Measured midband. Absolute Maximum (No Damage) Ratings 1) Care should always be taken to effectively ground the case of each unit 2) Typical values are measured at 25°C, but not guaranteed. 3) Package drawings below are for reference only. * Power Output is 1 dB lower above 2500 MHz. Operating Temperature -55ºC to +100 ºC Storage Temperature -62ºC to +125ºC Case Temperature +125 ºC DC Voltage +17 Volts Continuous RF Input Power +10 dBm Short Term RF Input Power 50 Milliwatts (1 Minute Max.) Maximum Peak Power 0.5 Watt (3 μsec Max.) Rev Date: 11/4/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]