AGF Bored thermowell with flanged process connection Main Features Stainless steel Max. 500 °C Max. 400 mm Applications Oil & Gas / Chemical Water & Waste water Energy Machinery Technical data Max. immersion length (Pg): Max. Temperature: (1) Max. Pressure: (1) Min. wall thickness: (1) 400 mm 500 °C according to thermowell dimensions 3 mm Admissible values in service depend on: - process fluid - service temperatures and pressures - flow - thermowell type and dimensions Cone-shaped thermowell, state Dg1 and Dg2 Radiography of weldings Full penetration welding Internal hydraulic test Forged material External hydraulic test Design and specifications subject to change without notice Options 2015-10-15 Sweating of weldings www.baumer.com Data sheet B51.01 Page 1 / 3 AGF Bored thermowell with flanged process connection Dimensions (mm) - Types of mounting Eg 60* Pg Dg1 Dg Dg2 Di G1/2 1/2 NPT 10* Ordering codes for flange faces Flat face Drawing ANSI B16-5 Codes A Flat face Ra = 3.2...6.3 µm Raised face (1.6) Raised face (6.4) (4) G R Ra = 3.2...6.3 µm Male tongue large Male tongue small (1) H I Ra = 0.8...3.2 µm Female groove Female groove large Female groove small K L Male spigot large Male spigot small (2) Female spigot large Female spigot small (2) M N Ring joint face Ra = 0.4...1.6 µm G R Type DL Type DS Type E O P Type FC H I Type J A Type A Type B1 B C Type C Ra = 0.8...3.2 µm K L D Type D Ra = 0.8...3.2 µm M Type E E Ra = 3.2...12.5 µm O Ra = 3.2...6.3 µm Q Codes Ra = 3.2...12.5 µm Ra = 3.2...6.3 µm Ra = 3.2...6.3 µm Ring joint face Type CL Type CS (1) (1) EN 1092-1 Ra = 3.2...6.3 µm Ra = 0.8...3.2 µm Ra = 3.2...6.3 µm Female Spigot Type B (1.6) Type B (6.4) (4) (3) Ra = 0.8...3.2 µm Ra = 0.8...3.2 µm Male Spigot A Type A Ra = 3.2...6.3 µm (1) Male tongue Codes Ra = 3.2...6.3 µm (3) Raised face EN 1759-1 F Type F Design and specifications subject to change without notice Face Type Ra = 3.2...12.5 µm Q N/A Ra = 0.4...1.6 µm Not applicable for 1"1/4 and 1"1/2 Only applicable for 4" (3) Class 150 and 300 (4) Class 600, 900, 1500, 2500 (1) 2015-10-15 (2) www.baumer.com Data sheet B51.01 Page 2 / 3 AGF Bored thermowell with flanged process connection Ordering details AGF AGF . – xxx Model Flange face type see table on page 2 (codes) Extension (Eg) 60 mm 100 mm Other Material Stainless steel 1.4404 Stainless steel Duplex 1.4462 A350 LF2 Other PN / class EN 1092-1 10 16 25 40 100 ANSI B16-5 / EN 1759-1 150 300 600 900 1500 2500 Shank design A GF P S T – x 0 1 x 2 P R x . G 1/2" 1/2 NPT Other G H J K L M N P Q R T U V W Y 1 2 x C D F G J 1 2 3 4 5 6 C D E F G H J K L 1 2 3 4 5 6 7 8 9 x 2 3 4 5 6 7 8 9 V 13 mm 14 mm 15 mm 16 mm 17.5 mm 18 mm 19 mm 20 mm 21 mm 22 mm 23 mm 24 mm 25 mm 26 mm 27 mm 28 mm 29 mm Other Internal diameter Di (1) 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 16 mm Other L N x minimum wall thickness 3 mm 2015-10-15 (1) 100 mm 150 mm 200 mm 250 mm 300 mm 350 mm 400 mm Other External diameter Dg (1) DN EN 1092-1 15 20 25 32 40 50 65 80 100 ANSI B16-5 / EN 1759-1 1/2" (DN 15) 3/4" (DN 20) 1" (DN 25) 1" 1/4 (DN 32) 1" 1/2 (DN 40) 2" (DN 50) 2" 1/2 (DN 65) 3" (DN 80) 4" (DN 100) Instrument connection 100 150 200 250 300 350 400 xxx Straight Stepped Tapered Plunger length Pg Design and specifications subject to change without notice Bored thermowell with flanged process connection www.baumer.com Data sheet B51.01 Page 3 / 3