AGFR Bored thermowell with threaded process connection Main Features Stainless steel Max. 500 °C Max. 400 mm Applications Oil & Gas / Chemical Water & Waste water Energy Machinery Technical data Characteristics Max. immersion length (Pg): Max. Temperature: (1) Max. Pressure: (1) Min. wall thickness: (1) 400 mm 500 °C according to thermowell dimensions 3 mm Admissible values in service depend on: - process fluid - service temperatures and pressures - flow - thermowell type and dimensions H* / flat indicative Di 27 7 ... 13 17.5 1/2 NPT - 1/2 BSP-Tr 27 7 ... 13 17.5 G 3/4 27 7 ... 15 23 3/4 NPT - 3/4 BSP-Tr 27 7 ... 15 22 G1 36 7 ... 15 29 1 NPT - 1 BSP-Tr 27 7 ... 15 28 F G 1/2 Dg or Dg2 max. Cone-shaped thermowell, state Dg1 and Dg2 Internal hydraulic test Forged material External hydraulic test Dimensions (mm) - Types of mounting Dg2 Dg Dg2 H* flat Dg Di Dg1 F H* flat Di G1/2 G1/2 1/2 NPT 10* 10* Pg Without extension www.baumer.com 1/2 NPT 20* Pg Eg + 20 With extension (Eg) Data sheet B51.02 2015-04-28 Dg1 F Design and specifications subject to change without notice Options Page 1 / 2 AGFR Bored thermowell with threaded process connection Ordering details AGFR AGFR – . 0 xxx Model Bored thermowell with threaded connection Extension (Eg) Without With extension 100 mm Other Material Stainless steel 1.4404 Stainless steel Duplex 1.4462 A350 LF2 Other Process connection (F) G 1/2 1/2 NPT G 3/4 3/4 NPT 1 NPT Other Instrument connection G 1/2 1/2 NPT Other Internal diameter Di (1) 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 16 mm Other – 0 1 x 2 P R x 3 6 D E F x . 100 150 200 250 300 350 400 xxx Straight Stepped Tapered Plunger length Pg 100 mm 150 mm 200 mm 250 mm 300 mm 350 mm 400 mm Other External diameter Dg (1) 0 L N x 1 2 3 4 5 6 7 8 9 x G H J K L M N P Q R T U V W Y 1 2 x 13 mm 14 mm 15 mm 16 mm 17.5 mm 18 mm 19 mm 20 mm 21 mm 22 mm 23 mm 24 mm 25 mm 26 mm 27 mm 28 mm 29 mm Other minimum wall thickness 3 mm 2015-04-28 Design and specifications subject to change without notice (1) Shank design P S T A GFR www.baumer.com Data sheet B51.02 Page 2 / 2