Multi-layer Band Pass Filters CTBPF1608F Series ctparts.com SPECIFICATIONS Part Number Pass Band Frequency (MHz) Imp. Ω Insertion Loss (dB) Max. 2.1 at 25°C Ripple (dB) Attentuation (dB) Min. 30dB@880~960MHz CTBPF1608T2450F 2400-2500 50 2.3 at -40~+85°C 0.6 12.5dB@1710~1990MHz 2.4 GHz 20dB@4800~5000MHz 25dB@7200~7500MHz PAD LAYOUT DIMENSIONS Not shown at actual size. RoHS Compliant Size L W P1 P2 D mm inches 1.2±0.1 0.7±0.1 0.3±0.1 0.3±0.1 0.6±0.1 0.047±0.0039 0.027±0.0039 0.012±0.0039 0.012±0.0039 0.024±0.0039 L P1 W P2 CHARACTERISTICS D Description: LTCC Band Pass Filters Applications: 2.4GHz ISM band WLAN and Bluetooth Operating Temperature: -25°C to +85°C Packaging: Tape & Reel Polarity Marking: Marking is on the upper surface of the unit Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. Ps: Line width base on 50Ω Impedance PHYSICAL DIMENSIONS Size mm inches L W T P1 P2 E1 F1 H1 1.6±0.15 0.8±0.15 0.6±0.15 0.25±0.2 0.25±0.2 0.2±0.15 0.2±0.15 1.4±0.15 0.063±0.0059 0.031±0.0059 0.024±0.0059 0.010±0.0078 0.010±0.0078 0.008±0.0059 0.008±0.0059 0.055±0.006 L W E1 P1 T P2 Port P1 P2 E1 F1 H1 05.31.11 CENTRAL TECHNOLOGIES Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2011 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice Remark I/O Termination I/O Termination GND