BP2500H0603AT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 1.6 X 0.8 X 0.6 mm, RoHS compliant. 2. Provide low insertion loss, and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500H0603AT Frequency range Insertion Loss (max) Specification 2400 - 2500 MHz 0.95 dB max. at +25°C 1.25 dB max. -40°C to +85°C VSWR 2.0 max Impedance 50 Ω Attenuation (min.) 20 dB @ 500 - 960MHz 23 dB @ 3200 MHz 30 dB @ 4800 - 5000MHz 32 dB @ 7200 - 7500MHz Operating temperature range -40°C to +85°C TERMINAL CONFIGURATION PIN Definition P1 Input P2 GND P3 Output Symbol Dimension (mm) L 1.60 ± 0.15 W 0.80 ± 0.10 T 0.65 max A 0.25 ± 0.10 B 0.23 ± 0.05 C 0.40 ± 0.10 D 0.30 ± 0.15 E 0.55 ± 0.10 F 0.60 ± 0.10 PCB DESIGN/LAYOUT CONSIDERATION Note: - Unit in mm - Design trace width to be 50Ω impedance. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500H0603AT BAND PASS FILTER SPECIFICATION Rev. A Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989