V is h ay I n t e r t e c h n o l o g y, I n c . Resistors - 3 W Power Capability in 5515 Package I INNOVAT AND TEC O L OGY WSMS5515 N HN POWER METAL STRIP® RESISTOR O 19 62-2012 Power Metal Strip® Meter Shunt Resistor, Very Low Value (Down to 0.00010 Ω) Very low resistance values of 100 μΩ to 500 μΩ Key Benefits • • • • Very low resistance values: 100 µΩ, 160 µΩ , 200 µΩ, 250 µΩ, 300 µΩ, 500 µΩ 3 W power capability in 5515 package Offers 4-terminal (Kelvin) connection design All-welded construction APPLICATIONS • Industrial power meters (three-phase and polyphase) • Consumer power meters (single-phase and polyphase) Resources • Datasheet: WSMS5515 - http://www.vishay.com/doc?30135 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0072-1201 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Document Number: 30135 Revision: 02-Jul-10 SPECIAL (Dash number) (Up to 2 digits) From 1 to 99 as applicable ± 325 for 100 μΩ, ± 225 for 160 μΩ, 200 μΩ, and 250 μΩ, ± 175 for 300 μΩ to 500 μΩ K = Bulk pack PACKAGING CODE Policy”: www.vishay.com/doc?99902 For technical questions, contact: ww2bresis [email protected] 0 0 5 J = ± 5.0 % 2 L 5 TOLERANCE CODE (WSMS5515, 0.00025 Ω, ± 5 %) 1 GLOBAL PART NUMBER INFORMATION GLOBAL PART NUMBERING: WSMS5515L2500JK A °C UNIT ppm/°C 50μ to 1000μ 5.0 Note (1) Other values may be available, contact factory RESISTANCE VALUE RANGEΩ TOLERANCE % STANDARD ELECTRICAL SPECIFICATION S I 19 62-2012 WSMS5515 Vishay Dale 1.441 0.156 0.079 CALIBRATION CUT 0.142 TRICAL SPECIFICATIONS ** Please see document “Vishay Material Category WSMS5515 GLOBAL MODEL 0.724 WSMS5515 www.vishay.com 42 L = mΩ L1000 = 0.00010 Ω L1600 = 0.00016 Ω L2000 = 0.00020 Ω L2500 = 0.00025 Ω L3000 = 0.00030 Ω L5000 = 0.00050 Ω RESISTANCE VALUE 5 5 S M S W Temperature Coefficient TECHNICAL SPECIFICATIONS PARAMETER 3.0 5515 WSMS5515 POWER RATING P70 °CW SIZE GLOBAL MODEL Vishay Dale ower Metal Strip® Meter Shunt Resistor, Very Low Value (down to 0.00010 Ω) Operating Temperature Range 0.079 • connection design • 4-terminal High power(Kelvin) to resistor size ratio • 4-terminal (Kelvin) connection design 0.142 FEATURES 0.488 0.079 • processing technique • Proprietary 4-terminal (Kelvin) connection design produces • Proprietary processing technique produces • High power to resistor size ratio 0.138 extremely low resistance values extremely low resistance values • Proprietary processing technique produces • 0.295 4-terminal (Kelvin) connection design • All welded construction extremely low resistance values 0.056 • All welded construction • Proprietary processing produces • Very low inductance (< 0.5technique nH) 0.590 FEATURES • All welded construction • Very low inductance (< 0.5 nH) extremely low resistance values • Low thermal EMF (< 3 • High power to resistor size ratio • Very low inductance (<μV/°C) 0.5 nH) • Low thermal EMF (< 3 μV/°C) • AllShunt welded Resistor, construction Power Metal Strip® Meter Vishay Dale • toEMF RoHS • 4-terminal (Kelvin) connection design • Compliant Low thermal (<directive 3 μV/°C) 2002/95/EC • Compliant to RoHS directive 2002/95/EC • Very low inductance (< 0.5 nH) 1.575 Very Low Value (down to 0.00010 0.295 Ω) • Proprietary processing technique produces • Compliant to RoHS directive 2002/95/EC 2.165 ± 0.010 • Low thermal EMF (< 3 μV/°C) R 0.020 (2) R 0.020 (2) extremely low resistance values DIMENSIONS in inches R 0.078 REF. (1) • Compliant to RoHS directive 2002/95/EC ELECTRICAL SPECIFICATIONS Ø 0.244 THRU (2) •STANDARD All welded construction R 0.028 (4) Maximum Current Rating FEATURES Resistors - 3 W Power Capability in 5515 Package AND TEC INNOVAT K J (P/R)1/2 - 65 to + 170 RESISTOR CHARACTERISTICS 100μ, 160μ, 200μ, 250μ, 300μ, 500μ 7800 WEIGHT (typical)g/1000 pieces RESISTANCE VALUES CURRENTLY AVAILABLE (1) Ω • Low thermal EMF (< 3 μV/°C) • Compliant to RoHS directive 2002/95/EC • 4-terminal (Kelvin) connection design • Proprietary processing technique produces extremely low resistance values • All welded construction • Very low inductance (< 0.5 nH) WSMS5515 1.005 N O L OGY • High power to resistor size ratio POWER METAL STRIP® RESISTOR WSMS5515 WSMS5515 Vishay Dale WSMS5515 Vishay Dale Power Metal Strip®® Meter Shunt Resistor, Power Metal Strip Meter ShuntPower Resistor, Power Metal Strip® Meter ShuntVery Resistor, Metal Strip® Meter Shunt Resistor, Vishay Dale Low Value to 0.00010 Ω)to 0.00010 Ω) ® (Down Very Low Value (down Power Metal Strip Meter Shunt Resistor, Very Low Value (down to 0.00010Very Ω) Low Value (down to 0.00010 Ω) ®(down in to inches0.00010 Ω) VeryMetal Low Value Power StripDIMENSIONS Meter Shunt Resistor, FEATURES DIMENSIONS FEATURES in inches • High power to resistor size to 0.00010 Ω)ratio FEATURES • High power to resistorVery size ratioLow Value (down WSMS5515 O HN Power Metal Strip® Meter Shunt Resistor, Very Low Value (down to 0.00010 Ω) V is h ay I n t e r t e c h n o l o g y, I n c . 0.080 x 45° CHAH. (4) 1.441 ELECTRICAL SPECIFICATIONS •STANDARD Very low inductance (< 0.5 nH) 0.156 DERATING TOLERANCE RESISTANCE VALUE GLOBAL POWER RATING 1.005 Rated Power in % WEIGHT RESISTANCE VALUES RESISTANCE VALUES 0.079 WEIGHT (typical)g/1000 CURRENTLY AVAILABLE CALIBRATION CUT(1) TOLERANCE RESISTANCE VALUESIZE OWER RATING TOLERANCES ON DECIMALS 120 RANGEΩ (1) % (typical)g/1000 P70 °CW •MODEL Low thermal EMFCURRENTLY (< 3 μV/°C) AVAILABLE WEIGHT RESISTANCE VALUES XXX ± 0.005 Ω pieces 0.142 STANDARD ELECTRICAL SPECIFICATIONS % RANGEΩ P70 °CW TOLERANCE RESISTANCE VALUE GLOBAL POWER RATING (1) 0.724 0.079 100 Ω pieces (typical)g/1000 CURRENTLY AVAILABLE SIZE •MODEL Compliant to RoHS directive W % RANGEΩ P70 °C2002/95/EC 0.142 WEIGHT RESISTANCE Ω VALUES pieces 0.488 100μ, 160μ, 200μ, 80 TOLERANCE RESISTANCE VALUE GLOBAL RATING VALUE RESISTOR THICKNESS ELEMENT WSMS5515 5515 POWER 5.00.079 50μ to 1000μ 7800 (1)RESISTANCE 100μ,3.0 160μ, 200μ, (typical)g/1000 CURRENTLY AVAILABLE SIZE 250μ, 300μ, 500μ (inches) MATERIAL (μΩ) 3.0 5.0 50μ to 1000μ 7800 W 500μ % RANGEΩ MODEL P70 °C 250μ, 300μ, 60 100μ, 160μ, 200μ, Ω pieces 100 0.033 Mn-Cu 0.138 WSMS5515 5515 3.0 5.0 50μ to 1000μ 7800 250μ, 300μ, 500μ Note CAL SPECIFICATIONS 160 0.051 Mn-Cu 40 (1) Other values may 100μ, 160μ, 200μ, 0.295 be available,3.0 contact factory 5.0 2007800 0.051 Mn-Cu WSMS5515 5515 50μ to 1000μ Note 20 0.056 250μ, 300μ, 500μ ailable, contact factory WEIGHT RESISTANCE VALUES 250 0.033 Mn-Cu TOLERANCE RESISTANCE VALUE ER RATING (1) Other (1) values may be available, contact factory (typical)g/1000 CURRENTLY AVAILABLE 0 0.590 300 0.033 Mn-Cu % RANGEΩ - 65 - 50 - 25 0 25 50 75 100 125 150 175 70 °CW Note Ω pieces Ambient Temperature in °C 500 0.059 Fe-Cr (1) Other values may be available, contact factory 70 TECHNICAL SPECIFICATIONS CIFICATIONS 100μ, 160μ, 200μ, 3.0 5.0 50μ to TECHNICAL 1000μ 7800 PARAMETER UNIT RESISTOR CHARACTERISTICS 0.080 x 45° SPECIFICATIONS 250μ, 300μ, 500μ PERFORMANCE UNIT RESISTOR CHARACTERISTICS CHAH. (4) PARAMETER UNIT RESISTOR TEST OF250 TESTμΩ, TEST LIMITS ± 325 for 100 μΩ, ± 225 CHARACTERISTICS for 160 μΩ, CONDITIONS 200 μΩ, and 1.575 TECHNICAL SPECIFICATIONS 0.295 Temperature ppm/°C ± 325 for 100Coefficient μΩ, ± 225 for 160 μΩ, 200 μΩ, and 250 μΩ, ± 175 for 300 μΩ to 500 μΩ Thermal Shock 55 °C to + 150 °C, 1000 cycles, 15 min at each extreme ± 0.5 % ΔR 2.165 ± 0.010 e, contact factory ppm/°C ± 325 for 100 μΩ, ± 225 for power 160R μΩ, 200 μΩ, and 250 μΩ, ± 175 for 300 μΩ to 500 μΩ ppm/°C PARAMETER UNIT RESISTOR CHARACTERISTICS 0.020 Short(2) Time Overload 5 x rated for 5 s (2) ± 0.5 % ΔR Temperature Coefficient R 0.020 ± 175 for 300 μΩ to 500 μΩ Operating Temperature Range °C - 65 to + 170 Low Temperature Operation - 65 °C for 45 min ± 0.5 % ΔR ange °C - 65 to + 170 ± 325 for 100 μΩ, ± 225 for 160R μΩ, 200 μΩ, and 250 μΩ, 0.078 REF. (1) Ø 0.244 THRU (2) Temperature CoefficientRange ppm/°C High Temperature Exposure 1000 h atto + 170 °C ± 1.0 % ΔR Operating Temperature °C - 65 +1/2170 ± 175 for 300 to 500 μΩ R 0.028 (4) Maximum Current Rating A (P/R)μΩ CATIONS Bias Humidity + 85 °C, 85 % RH, 10 % bias, 1000 h ± 0.5 % ΔR A (P/R)1/2 1/2 Maximum Current Rating A (P/R) Mechanical Shock 100 for 5 pulses ± 0.5 % ΔR Operating Temperature Range °C - g’s 65 to6+ms, 170 DERATING UNIT RESISTOR CHARACTERISTICS Rated Power in % Vibration Frequency varied 10 Hz to 2000 Hz in 1 min, 3 directions, 12 h TOLERANCES ON DECIMALS 120 1/2 Maximum Current Rating A Load Life 1000 h(P/R) at + 70XXX °C, 1.5 “ON”, 0.5 h “OFF” ± h0.005 ± 325 for 100 μΩ,PART ± 225 for 160 μΩ, 200INFORMATION μΩ, and 250 μΩ, GLOBAL NUMBER ± 175 for 300 μΩ to 500 μΩ Moisture Resistance MIL-STD-202, method 106, 0 % power, 7b not required 100 UMBER INFORMATION GLOBAL PART NUMBERING: WSMS5515L2500JK (WSMS5515, 0.00025 Ω, ± 5 %) GLOBAL PART NUMBER INFORMATION RING: WSMS5515L2500JK (WSMS5515, 0.00025 Ω, ± 5 %) e °C - 65 to + 170 80 RESISTOR THICKNESS ELEMENT RESISTANCE GLOBAL 0.00025 %) VALUE WPART SNUMBERING: M SWSMS5515L2500JK 5 5 1(WSMS5515, 5 L 2Ω, ± 5 (μΩ) 5 0 0 J (inches) K GLOBAL PART NUMBER INFORMATION MATERIAL S 5 A 5 1 5 L 60 2 5 0 1/2 0 J K (P/R) GLOBAL 0.00025 %) 100 Mn-Cu WPARTSNUMBERING: M SWSMS5515L2500JK 5 5 1(WSMS5515, 5 L 2Ω, ± 5 5 0 0 J 0.033 K ppm/°C GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE 40 W SPACKAGING M S 5 5 1SPECIAL 5 Document L Number: 2 30135 TOLERANCE CODE WSMS5515 CODE L = mΩVALUE J = ±Revision: 5.0 % 02-Jul-10 GLOBAL MODEL RESISTANCE TOLERANCE CODE L = mΩ J = ± 5.0 % 20 K = BulkL1000 pack = 0.00010 Ω (Dash number) BER INFORMATION WSMS5515 mΩ = ± 5.0 % L1600L==0.00016 Ω L1000 = 0.00010 Ω to 2J digits) GLOBAL MODEL RESISTANCE VALUE (UpTOLERANCE CODE G: WSMS5515L2500JK L1000 L2000 = 0.00010 0.00020 Ω L1600 = 0.00016 Ω (WSMS5515, 0.00025 Ω,0- ±655- %) 50 - 25 0 25L1600 50 75 100 125From 150 1 to 17599 as 0.00016 L2500 = 0.00025 Ω WSMS5515 L = mΩ J = ± 5.0 % L2000 = 0.00020 Ω applicable Ambient Temperature in °C L2000 0.00020 0.00030 L1000 0.00010 SL25005= 0.00025 5 Ω 1 5 L 2 5 0 0 L3000 J =70 K Ω L2500 0.00025 L5000 L1600 = 0.00050 0.00016 Ω L3000 = 0.00030 Ω L3000 = 0.00030 L2000 0.00020 Ω L5000 = 0.00050 Ω L5000 L2500 = 0.00050 0.00025 Ω SPECIAL SISTANCE VALUE TOLERANCE CODE PACKAGING CODE PERFORMANCE L3000 = 0.00030 Ω L = mΩ J = ± 5.0 % K = Bulk pack L5000 = 0.00050 Ω(Dash number) TEST CONDITIONS OF TEST 000 = 0.00010 Ω (Up to 2 digits) RESISTANCE VALUE PACKAGING CODE 160 0.051 SPECIAL Mn-Cu K = Bulk pack 200 PACKAGING CODE 250 K = Bulk pack PACKAGING CODE 300 K = Bulk pack 500 0.051 (Dash number) Mn-Cu SPECIAL (Up to 2 digits) (Dash1number) From to Mn-Cu 99 as SPECIAL (Up to 2 digits) applicable Mn-Cu From to 99 as (Dash1number) Fe-Cr applicable (Up to 2 digits) 5 0 For technical 0 questions, J contact: K [email protected] Revision 02-Jul-10 600 = 0.00016 Ω to 99 as cycles, 15 min at each extreme Thermal Shock - 55 °C toFrom + 1501°C, 1000 000 = 0.00020 Ω applicable Short Time Overload 5 x rated power for 5 s ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 500 = 0.00025 Ω 000 0.00030Category Ω shay=Material Policy”: www.vishay.com/doc?99902 Low Temperature Operation - 65 °Ctechnical for 45Policy”: min www.vishay.com For questions, contact: [email protected] ** Please see document “Vishay Material Category www.vishay.com/doc?99902 000 = 0.00050 Ω 42 [email protected] For technical questions, contact: Document 30135 High Temperature Exposure 1000 htechnical at + 170 questions, °C Number: www.vishay.com For contact: [email protected] ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Revision: 02-Jul-10 42Bias Humidity + 85 °C, 85 % RH, 10 % bias, 1000 h www.vishay.com For technical questions, contact: [email protected] 100 g’s for 6 ms, 5 pulses 42Mechanical Shock Vibration Frequency varied 10 Hz to 2000 Hz in 1 min, 3 directions, 12 h Load Life Material Category Policy”: www.vishay.com/doc?99902 Moisture Resistance For technical questions, contact: [email protected] PRODUCT SHEET 0.033 0.033 0.059 ± 1.0 % ΔR ± 0.5 % ΔR www.vishay.com 43 From 1 to 99 as applicable TEST LIMITS ± 0.5 % ΔR ± 0.5 % ΔR ± 0.5 %Number: ΔR Document 30135 Revision: 02-Jul-10 ± 1.0 %Number: ΔR Document 30135 Revision: ± 0.5 % ΔR 02-Jul-10 Document Number: 30135 ± 0.5 % ΔR 02-Jul-10 Revision: ± 0.5 % ΔR 1000 h at + 70 °C, 1.5 h “ON”, 0.5 h “OFF” ± 1.0 % ΔR MIL-STD-202, method 106, 0 % power, 7b not required Document Number: 30135 Revision: 02-Jul-10 ± 0.5 % ΔR 2/2 ± 0.5 % ΔR VMN-PT0072-1201 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO Document Number: 30135 For technical questions, contact: [email protected] www.vishay.com Revision: 02-Jul-10 43 SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000