TB0214A

TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
Product Specifications Approval Sheet
Product Description: Low-Loss 70MHz IF SAW Filter (BW=16 MHz)
TST Parts No.: TB0214A
Customer Part No.:
Company:
Division:
Approved by :
Date:
Checked by:
Marco Huang
Approval by:
Bob Chau
Date:
10/01/2015
1. Customer signed back is required before TST can proceed with sample build and receive orders.
2. Orders received without customer signed back will be regarded as agreement on the specifications.
3. Any specifications changes must be approved upon by both parties and a new revision of specifications
shall be released to reflect the changes.
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
FR-71S03-02
TAI-SAW TECHNOLOGY CO., LTD.
No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected] Web: www.taisaw.com
Low-Loss 70 MHz IF SAW Filter (SMD 13.3×6.5 mm)
Model No.: TB0214A
Rev. No.:2.0
RoHS Compliant
Lead free
Lead-free soldering
A. Maximum Rating:
1. Input Power Level: +20 dBm
Electrostatic Sensitive Device
2. Operating Temperature: -10C to +70C
3. Storage Temperature: -40C to +85C
B. Electrical Characteristics:
Parameters
Unit
MHz
Min.
69.8
Typical
70
Max.
70.2
dB
-
12.2
13.2
1 dB Bandwidth
MHz
15.2
15.38
-
3 dB Bandwidth
MHz
16.0
16.41
-
40 dB Bandwidth
MHz
-
20.17
21.0
10 to 59.5 MHz
dB
40
43
-
82 to 140 MHz
dB
40
45
-
Amplitude ripple within Fc  7 MHz
dB
-
0.55
1.0
nsec
-
40
80
-
-
YZ-LN
-
ppm/ C
-
-94
-
Center frequency, Fc
Insertion Loss, IL
Relative Attenuation:
Group Delay ripple within Fc  7 MHz
Substrate Material
Temperature Coefficient of frequency
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
2
C. Frequency Characteristics:
(1) Frequency Response
(2) Passband response and Group Delay Variation
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
3
D. Measurement Circuit:
Source and load impedance: 50 
Input: L1=220 nH, Q>40
Output: L2=220 nH, Q>40
E. Outline Drawing:
Pin L: RF Input
Pin E: RF Output
Pin M: Input Ground
Pin F: Output Ground
Pin A, B, C, D, G, H, J, K : To be Ground
□: Date code
△: Year code
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
4
F. PCB Footprint:
G. Packing:
1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity)
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
5
H. Recommended Reflow Profile:
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
6