TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: SAW Filter 403.5 MHz SMD 3.8×3.8 mm TST Part No.: TA1135B Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Marco Huang Approved by: Bob Chau Date: 10/15/2015 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 403.5 MHz MODEL NO.: TA1135B REV. NO.:1 A. MAXIMUM RATING: 1.Input Power Level: 20 dBm 2.DC voltage: 3 V RoHS Compliant Lead free Lead-free soldering 3.Operating Temperature: -10C to 60C 4.Storage Temperature: -40C to +85C Electrostatic Sensitive Device B. ELECTRICAL CHARACTERISTICS: Item Center frequency Fc Minimum Insertion loss 402 ~ 405 MHz ILmin Passband Ripple 402 ~ 405 MHz 3dB Bandwidth BW-3dB Min. Typical Max. MH dB - 403.5 1.5 0.3 2.5 1.25 MHz 3 7.6 - dB dB dB dB ppm/k 40 35 25 40 64 59 36 59 -37 50 50 - Attenuation (Reference level from ILmin dB) 358.5 358.5~384.0 415.0~423.0 423.0~503.0 Temperature coefficient of frequency Source impedance Load impedance MHz MHz MHz MHz Zs ZL - - Note1: ILmin is the minimum of the pass band attenuation. The center frequency Fc is the mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the ILmin. Note2: The room temperature, Tr, is 25° C. FTC is temperature coefficient of frequency. The nominal frequency at temperature, Tc, may be calculated from f= Fc [1-FTC(Tr-Tc)]. C. MEASUREMENT CIRCUIT: HP Network analyzer B SAW Filter E A,C,D,F TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 D. FREQUENCY CHARACTERISTICS: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E.OUTLINE DRAWING: 1135 F.PCB FOOTPRINT: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) 2. TAPE DIMENSION 1135 1135 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 H. RECOMMENDED REFLOW PROFILE : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6