CINT1175 Demko A12 Cert

DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-02636-A1-M1
1/3
2015-03-06
Certificate Holder
SL POWER ELECTRONICS CORP
BLDG A, 6050 KING DR
VENTURA CA 93003, USA
Manufacturer
SL POWER ELECTRONICS CORP
BLDG A, 6050 KING DR
VENTURA CA 93003, USA
Production site
SL XIANGHE POWER ELECTRONICS CORP.
NO. B-02-03, NORTH SIDE OF LANSCAPE AVENUE, QIBU
DISTRICT, ENVIRONMENTAL INDUSTRIAL PARK, XIANGHE
COUNTY, HEBEI PROVINCE 065400
CHINA
See Page 2
Certified Product
Model
Trademark
Rated Voltage / Frequency
Rated Current / Power
Insulation Class
Degree of protection (IP)
Tested acc. to
Test Report No.
Additional
Expire date
Certification Manager
Jan-Erik Storgaard
Certification Body
Switching Power Supply
CINT1175A4806K02, CINT1175VXXYYKZZ
See Page 2
SL Power
See Page 2
See Page 2
Class I (earthed) or Class II (double insulated)
IP X0
EN 60950-1:2006/A11:2009, EN 60950-1:2006/A12:2011,
EN 60950-1:2006/A1:2010, EN 60950-1:2006
E135803-A64-CB-3 issued on 2015-03-05
2016-07-02
This is to certify that representative sample(s) of the Product described herein ("Certified Product") have
been investigated and found in compliance with the Standard(s) indicated on this Certificate, in
accordance with the D Mark Requirements. The Designated Certificate holder is entitled to use the d or
for cables <DEMKO> for the Certified Product manufactured at the production site(s) identified above, in
accordance with the D Mark Service Agreement, including without limitation the D Mark Testing and
Certification Services Service Terms. Only those Products bearing the D Mark should be considered as
being covered by UL's D Mark Service. This Certificate shall remain valid through the expiration date,
unless terminated earlier in accordance with the Service Agreement including without limitation if the
Standard identified on this Certificate is amended or withdrawn prior the expiration date.
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65,
[email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-02636-A1-M1
2/3
2015-03-06
Model Details:
CINT1175VXXYYKZZ Where V is A or B, where XX is any number 12 through 56,
where YY or ZZ is any number 00 through 99.
Production Sites:
INDUSTRIAS S L S A DE C V
CIRCUITO SIGLO XXI 2055COL PARQUE INDUSTRIAL EX-XXI 21254 MEXICALI BC
MEXICO
Ratings:
Input: 100-240 V~, 50-60 Hz, 2.0A
Output:
Without Fan:
Mainboard output: 12Vdc, 10A to 56Vdc, 2.15A, Max. 120W
With Fan (200 LFM):
Mainboard output: 12Vdc, 14.6A to 56Vdc, 3.13A
Fan board output: 12Vdc, 0.4A Max. 175W
For CINT1175A4806K02:
48Vdc, 1.25A, max. 60W with convection
External Certification Information:
This certificate is based on CB Certificate US-21763-A1-M1-UL issued on 2015-03-06 by UL (US)
Additional Information:
This certificate replaces the certificate No. D-02636-A1, dated 2015-02-05 due to updated factory locations.
Certification Body
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
Certification Body
D-02636-A1-M1
3/3
2015-03-06
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
www.ul-europe.com
Similar pages