File E135803
Project 97SC15289
January 21, 1998
REPORT
ON
COMPONENT - POWER SUPPLIES, INFORMATION TECHNOLOGY EQUIPMENT, INCLUDING
ELECTRICAL BUSINESS EQUIPMENT
Condor DC Power Supplies Inc.
Oxnord, CA
Copyright © 1998 Underwriters Laboratories Inc.
Underwriters Laboratories Inc. authorizes the above named company to
reproduce this Report provided it is reproduced in its entirety.
Underwriters Laboratories Inc. authorizes the above named company to
reproduce that portion of this Report consisting of this Cover Page through
Page 3.
File E135803
Vol. 1
Sec. 39
and Report
Page 1
Issued:
Revised:
1998-01-21
2005-04-11
DESCRIPTION
PRODUCT COVERED:
USR,CNR Switching Power Supply, Models GPFC160-X (where X is any
number from 5-48), SP1669, SP1722 and SP1732. Suffix –CF may be included.
ELECTRICAL RATINGS:
Input:
100-240 V ac, 50/60 Hz, 2.5 A.
Outputs:
Refer to table for standard output voltage models.
5 – 11.5 V @ 25 A or 127.5 W convection cooled; 31.3 A or
160 W with 26 cfm airflow and suffix –CF.
11.6 – 48 V @ 11.7 A or 140 W convection cooled; 13.3 A or
160 W with 26 cfm airflow and suffix –CF
MODEL
GPFC160-5
GPFC160-9
GPFC160-12
GPFC160-15
GPFC160-24
GPFC160-28
GPFC160-48
SP1669
SP1722
SP1732
CONVECTION COOLED
5.1 Vdc, 25 A
9 Vdc, 11.7 A
12 Vdc, 11.7 A
15 Vdc, 9.3 A
24 Vdc, 5.8 A
28 Vdc, 5.0 A
48 Vdc, 2.9 A
5.1 Vdc, 25 A
24 Vdc, 5.8 A
6.4 Vdc, 20 A
26 CFM AIRFLOW or
COVER/FAN OPTION
(Suffix –CF)
5.1 Vdc, 31.3 A
9 Vdc, 13.3 A
12 Vdc, 13.3 A
15 Vdc, 10.7 A
24 Vdc, 6.7 A
28 Vdc, 5.7 A
48 Vdc, 3.4 A
5.1 Vdc, 31.3 A
24 Vdc, 6.7 A
6.4 Vdc, 25 A
File E135803
Vol. 1
Sec. 39
and Report
Page 2
Issued:
Revised:
1998-01-21
2005-04-11
ENGINEERING CONSIDERATIONS (NOT FOR FIELD REPRESENTATIVE'S USE):
This product is for use only in (or with) complete equipment where the
acceptability of the combination is determined by Underwriters Laboratories
Inc.
USR/CNR indicates investigation to the U.S. and Canadian (BiNational) Standard for Information Technology Equipment – Safety- Part 1:
General Requirements, CAN/CSA No. 60950-1-03 * UL 60950-1, First Edition.
The equipment is for building in, Class I (earthed), for use on a TN
power system.
Conditions of Acceptability - When installed in the end-use
equipment, the following are among the considerations to be made:
1.
This component has been judged on the basis of the required spacings
in the Standard for Information Technology Equipment – Safety- Part
1: General Requirements, CAN/CSA No. 60950-1-03 * UL 60950-1, First
Edition, which would cover the component itself if submitted for
unrestricted listing.
2.
All secondary output circuits are SELV and are not hazardous energy
levels.
3.
The terminals and connectors have not been evaluated for field
wiring.
4.
The power supply shall be properly bonded to the main protective
earthing termination in the end product as this unit was investigated
for Class I construction as defined in UL 60950-1. An additional
evaluation shall be made if the power supply is intended for use in
other than Class I equipment.
5.
Bonding terminals provided on this equipment have not been evaluated
as protective earthing terminals.
6.
Magnetic device transformer T4 employs an OBJY2 electrical insulation
system designated Class F. Inductor T3 employs bobbin material rated
150°C in the thickness used.
File E135803
Vol. 1
Sec. 39
and Report
Page 3
Issued:
1998-01-21
7.
The equipment has been evaluated for use in a Pollution Degree 2
environment.
8.
The component shall be installed in compliance with the enclosure,
mounting, spacing, casualty markings and segregation requirements of
the end-use application.
9.
This power supply was evaluated for use in a 50°C ambient. An
additional evaluation should be made if the power supply is intended
to be used in an elevated ambient.
Certificate of Compliance
Certificate:
1212969 (LR 46516C)
Master Contract:
150684
Project:
1718739
Date Issued:
2005/10/12
Issued to:
Condor D.C. Power Supplies Inc.
2311 Statham Pky
Oxnard, CA 93033
USA
Attention: Mr. Dave Hemphill
The products listed below are eligible to bear the CSA Mark shown
Issued by:
Eugen Velea, MASc. E.Eng.
Authorized by: Shane Stevenson, Product
Group Manager
PRODUCTS
CLASS 5311 07
- POWER SUPPLIES - Component Type - (CSA 60950-1-03)
! "#$%&'()($* +)+ ,
* - ./*
+$+ ,0 1 %''(2.' 3* -'0&' 45* 2 - 6 7
1 !8 ./ 3
* !8 9 2- :,
; <% < 2& $! ,0
=
1
% #
#
, (
.
DQD 507 Rev. 2004-06-30
Certificate:
1212969 (LR 46516C)
Master Contract:
150684
Project:
1718739
Date Issued:
2005/10/12
> 2 ,
-'? APPLICABLE REQUIREMENTS
=0 22 2 = &'@-'('%('< ( A #
%1 " B
DQD 507 Rev. 2004-06-30
Supplement to Certificate of Compliance
Certificate:
Master Contract:
1212969
150684
The products listed, including the latest revision described below, are eligible to be
marked in accordance with the referenced Certificate.
Product Certification History
Project
Date
Description
1718739
2005/10/12
Update Report 1212969 to Remove Model SP1732 and upgrade to CSA 60950-1.
May 16, 2002
Original Certification. (Re-issued Report LR46516-271C as Report 1212969 and
updated to add Models GPFC160-6, -48 and SP1732, and to revise model
designations.
History
1212969