KMB12S-KMB125S Green Products Technical Data Data Sheet N1798, Rev. - KMB12S-KMB125S SINGLE PHASE 1.0 AMP SURFACE MOUNT SCHOTTKY BRIDGE RECTIFIER Features: • • • • • Schottky Brrier Chip Low Power Loss, High Efficiency Ideally Suited for Automatic Assembly Surge Overload Rating to 30A Peak Plastic Case Material has UL Flammability Classification Rating 94V-0 Mechanical Data: • • • • • • Case: MB-S, Molded plastic Terminals: Plated leads solderable per MIL-STD-202, Method 208 Polarity: as marked on case Mounting Position: Any Marking: Type Number Lead Free: For RoHS / Lead Free Version Mechanical Dimensions: In Inches/mm MBS • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • KMB12S-KMB125S Green Products Technical Data Data Sheet N1798, Rev. - Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol KMB 12S KMB KMB KMB KMB KMB KMB KMB KMB 13S 14S 145S 15S 16S 18S 110S 115S Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VDC 20 30 40 45 50 RMS Reverse Voltage VRMS 14 21 28 31 35 Type Number KMB 120S KMB 125S Unit 60 80 100 150 200 250 V 42 56 175 V 70 105 140 Average forward rectified output current (Note 1) @TA = 90°C IO 1 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A I2t 5.0 A2S I2t Rating for Fusing (t < 8.3ms) Forward Voltage (per element) @IF =1A 0.55 VFM 0.7 0.85 0.1 10 0.90 0.05 5 0.92 V Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 100°C IRM Typical Junction Capacitance(per leg) CJ 28 pF Typical Thermal Resistance (per leg) (Note 2) RθJA 75 °C/W Operating and Storage Temperature Range TJ, TSTG -55 to +150 °C 2 Note: 1. Mounted on glass epoxy PC board with 1.3mm solder pad. 2. Thermal Resistance from Junction to Ambient • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • mA KMB12S-KMB125S Technical Data Data Sheet N1798, Rev. - Green Products • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • KMB12S-KMB125S Technical Data Data Sheet N1798, Rev. - Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •