GBL401-GBL410 N1829 REV.-

GBL401-GBL410
Green Products
Technical Data
Data Sheet N1829, Rev. -
GBL401-GBL410
4.0 Amp Glass Passivated Bridge Rectifiers
Features:
•
•
•
•
•
Plastic Package has Underwriters Laboratory Flammability Classification 94V-0
High current capacity with small package
Glass passivated chip junctions
Superior thermal conductivity
High IFSM
Mechanical Dimensions: In mm
GBL
MARKING, MOLDING RESIN
Marking for Type Number, 1st row SSG YYWWL, 2nd row Type Number
Where YY is the manufacture year
WW is the manufacture week code
L is the wafer’s Lot Number
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
GBL401-GBL410
Green Products
Technical Data
Data Sheet N1829, Rev. -
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Maximum Ratings:
Symbol
GBL
401
GBL
402
GBL
404
GBL
406
GBL
408
GBL
410
Unit
Maximum Repetitive Voltage
Maximum DC Blocking Voltage
VRRM
VDC
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
70
140
280
420
560
700
V
Type Number
Average rectified forward current
60Hz Sine @TC=50℃
Wave Resistance load @TA=40℃
IO
4.0
3.0
A
Peak Forward Surge Current 8.3 ms Single
Half Sine-Wave Superimposed on Rated Load
IFSM
150
A
Rating of fusing (t < 8.3ms)
l2t
93
A2sec
Vdia
2.5
KV
Dielectric strength terminals to case,
AC 1 minute Current 1mA
Electrical Characteristics:
Type Number
Maximum instantaneous forward voltage
at 2.0A
Peak Reverse Current
@TA = 25°C
At Rated DC Blocking Voltage @TA = 125°C
Symbol
GBL
401
GBL
402
GBL
404
GBL
406
GBL
408
GBL
410
Unit
VF
1.1
V
IRM
5.0
500
µA
Thermal-Mechanical Specifications:
Type Number
Symbol
GBL
401
GBL
402
GBL
404
GBL
406
GBL
408
GBL
410
Unit
Maximum thermal on P.C.B without heat-sink
Resistance per leg on AI plate heat-sink
RθJA
RθJC
32
8
°C/W
Operating and Storage Temperature Range
TJ, TSTG
-55 to +150
°C
Case Style
GBL
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
GBL401-GBL410
Technical Data
Data Sheet N1829, Rev. -
Green Products
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
GBL401-GBL410
Technical Data
Data Sheet N1829, Rev. -
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •