1N914&DL914 N0526 REV.-

1N914 /DL914
Technical Data
Data Sheet N0526, Rev. -
Green Products
1N914 /DL914 FAST SWITCHING DIODE
Features:
•
•
•
•
•
•
•
Fast Switching Speed
Glass Package Version for High Reliability
High Conductance
Available in Both Through-Hole and Surface Mount Versions
This is a Pb − Free Device
All SMC parts are traceable to the wafer lot
Additional testing can be offered upon request
Mechanical Data:
•
•
•
•
•
Case: DO-35, DL-35
Terminals: Plated leads Solderable per MIL-STD-202, Method 208
Polarity: Cathode Band
Weight:
DO-35 0.13 grams
DL-35 0.05 grams
Marking: Part Name, SSG and Marking code for date code
Mechanical Dimensions: In mm/Inches
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
1N914 /DL914
Technical Data
Data Sheet N0526, Rev. -
Green Products
Maximum Ratings @TA=25°C unless otherwise specified
Characteristic
Symbol
Limits
Unit
VRM
100
V
VRRM
VRWM
VR
75
V
VR(RMS)
53
V
Forward Current
IF
300
mA
Rectified Current(Average), Half Wave Rectification with
Resistive Load and f≥50MHz (Note 1)
IO
150
mA
Non-Repetitive Peak Forward Surge Current @t=1.0s
@t=1.0μs
IFSM
1.0
2.0
A
Power Dissipation
Derate Above 25°C
PD
500
1.68
mW
mW/°C
RθJA
300
°C/W
TJ, TSTG
-65 to +175
°C
Non- Repetitive Peak Reverse Voltage
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Typical Thermal Resistance, Junction to Ambient Air
Junction and Storage Temperature Range
Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic
Forward Voltage
Symbol
Min
Max
Unit
Test Condition
VFM
-
1.0
V
@IF=10mA
uA
uA
uA
nA
@VR=75V
@VR=70V, TJ=150°C
@VR=20V, TJ=150°C
@VR=20V
Reverse Leakage Current
IRM
-
5.0
50
30
25
Capacitance
CT
-
4
pF
VR=0V, f=1.0MHz
Reverse Recovery Time
trr
-
4
ns
IF=10mA to IR=1.0mA,
VR=6V, RL=100Ω
Note: 1. Diode on Substrate substrate 10×8×0.7mm
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
1N914 /DL914
Technical Data
Data Sheet N0526, Rev. -
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
Green Products
1N914 /DL914
Technical Data
Data Sheet N0526, Rev. -
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
Similar pages