MBR2535CTL Technical Data Data Sheet N1014, Rev. A Green Products MBR2535CTL SCHOTTKY RECTIFIER Applications: • • • • Switching power supply Converters Free-Wheeling diodes Reverse battery protection Features: • • • • • • • • • 150°C TJ operation Center tap configuration Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered upon request Mechanical Dimensions: In mm Symbol A A1 A2 b b1 c D D1 E e e1 H1 L L1 ΦP Q Θ1 Θ2 Θ3 Dimensions in millimeters Min Typical Max 4.42 4.57 4.72 1.17 1.27 1.37 2.59 2.69 2.89 0.71 0.81 0.96 1.27 0.36 0.38 0.61 14.94 15.24 15.54 8.85 9.00 9.15 10.01 10.16 10.31 2.54 5.06 6.04 6.24 6.44 12.7 13.56 13.78 3.5 3.74 3.84 4.04 2.54 2.74 2.94 7° 3° 4° TO-220AB(HD) • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • MBR2535CTL Technical Data Data Sheet N1014, Rev. A Green Products Marking Diagram: Where XXXXX is YYWWL MBR 25 35 CTL SSG YY WW L = Device Type = Forward Current (25A) = Reverse Voltage (35V) = Configuration = SSG = Year = Week = Lot Number Cautions：Molding resin Epoxy resin UL:94V-0 Ordering Information: Device Package TO-220AB (Pb-Free) MBR2535CTL Shipping 50pcs / tube For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification. Maximum Ratings: Characteristics Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Forward Current Peak Repetitive Forward Current Peak Repetitive Reverse Surge Current Peak One Cycle Non-Repetitive Surge Current (per leg) Controlled Avalanche Energy Symbol VRRM VRWM VR IF(AV) IFRM Condition Max. Units - 35 V 50% duty cycle @TC = 142°C, rectangular wave form Rated VR, square wave, 20kHz,TC=139°C 12.5 (per leg) 25 (per device) A 25 A IRRM 2.0μs, 1.0 kHz 1.0 A IFSM 8.3 ms, half Sine pulse 150 A 20 mJ Waval - Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • MBR2535CTL Technical Data Data Sheet N1014, Rev. A Green Products Electrical Characteristics: Characteristics Forward Voltage Drop (per leg) * Reverse Current (per leg) * Symbol VF1 Condition @ 12.5A, Pulse, TJ = 25 °C Max. 0.47 Units V VF2 @ 12.5A, Pulse, TJ = 125 °C @VR = rated VR Pulse TJ = 25 °C @VR = rated VR , Pulse TJ = 125 °C - 0.41 V 1.0 mA 500 mA 10,000 V/μs IR1 IR2 Voltage Rate of Change dv/dt Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. * Pulse Width < 300µs, Duty Cycle <2% Thermal-Mechanical Specifications: Characteristics Junction Temperature (Note 1) Storage Temperature Maximum Thermal Resistance Junction to Case Maximum Thermal Resistance Junction to Ambient Approximate Weight Case Style Symbol Condition Specification TJ - -55 to +150 Units °C Tstg - -55 to +150 °C RθJC DC operation, Min. Pad 2.0 °C/W RθJA DC operation, Min. Pad 75.0 °C/W 2 g wt TO-220AB Note1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RθJA. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • MBR2535CTL Technical Data Data Sheet N1014, Rev. A Green Products TJ=125℃ TJ=25℃ TJ=25℃ Fig.1-Typical Junction Capacitance Fig.2-Typical Reverse Characteristics TJ=125℃ TJ=25℃ Fig.3-Typical Forward Voltage Characteristics Fig.4-Forward Current Derating Curve • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • MBR2535CTL Technical Data Data Sheet N1014, Rev. A Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •