5315TC

Document 311 -1
RFID Transponder Coils – 5315TC
The 5315TC is Coilcraft’s most rugged and lowest cost
antenna coil designed for RFID applications at 125 kHz.
The wrap-around terminals have large mounting surfaces
to ensure excellent board adhesion. The coil is wound on
a plastic base, providing great durability and allowing this
part to withstand harsh mechanical shock.
Their robust construction and 125°C rating make these
parts suitable for use in the most severe environments.
They were developed for automotive applications, including tire pressure monitoring systems.
In addition to the standard models shown, Coilcraft can
design transponder coils to operate at other frequencies.
Coilcraft Designer’s Kit C369 contains four samples
each of the standard parts shown. To order, contact
Coilcraft or visit http://order.coilcraft.com.
Inductance2 Read Matching
distance3 at 125 kHz
Sensitivity4 capacitor5
Part number1
±2% (mH)
Q min2(inches/cm) (mV/µT)
(pF)
5315TC-374XGL_
0.37
8
16 / 40.6
8.32
4380
5315TC-404XGL_
0.40
8
17 / 43.2
8.67
4050
5315TC-704XGL_
0.70
12
21 / 53.3
11.43
2320
5315TC-904XGL_
0.90
12
21 / 53.3
13.35
1800
5315TC-105XGL_
1.00
12
23 / 58.4
14.07
1600
5315TC-115XGL_
1.08
13
23 / 58.4
14.65
1500
5315TC-205XGL_
1.97
14
25 / 63.5
21.28
820
5315TC-245XGL_
2.38
12
26 / 66.0
23.97
680
5315TC-335XGL_
3.30
14
27 / 68.6
29.70
490
5315TC-415XGL_
4.15
15
29 / 73.7
34.95
390
5315TC-495XGL_
4.90
15
28 / 71.1
40.00
330
5315TC-685XGL_
6.80
13
30 / 76.2
53.87
240
5315TC-715XGL_
7.10
14
30 / 76.2
55.41
220
5315TC-725XGL_
7.20
17
30 / 76.2
56.74
220
1. When ordering, please specify packaging code:
5315TC-715XGLD
Packaging:D=13″ machine-ready reel. EIA-481 embossed plastic
tape (3000 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance and Q measured using Agilent/HP 4192A impedance analyzer at 125 kHz. For recommended test procedures, contact Coilcraft.
3. Read distance measured using the KEELOQ® Transponder Evaluation
Kit part number DM303005 from Microchip. Distance was recorded as
the voltage across the resonant circuit dropped below 10 mV.
DCR max6
(Ohms)
24
25
33
38
40
40
70
80
95
103
150
180
176
165
SRF typ7
(kHz)
7100
7300
4500
3800
2500
2300
2300
2400
1800
1260
1550
1350
890
880
4. Sensitivity measured in accordance with Coilcraft application note “Measuring Sensitivity of Transponder Coils.”
5. Matching capacitor value required for parallel resonant circuit operating
at 125 kHz.
6. DCR measured on micro-ohmmeter.
7. SRF measured using Agilent/HP 8753D network analyzer.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 311-1 Revised 02/19/09
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 311-2
RFID Transponder Coils – 5315TC
Dimensions
Typical L vs Frequency
14
0.536
13,61
Inductance (mH)
12
10
XXX
0.15
3,81
-725
0.10 ±0.002
2,54 ±0,05
8
-415
0.089
max
2,26
6
4
0.10
2,54
-115
-404
2
0.33
8,38
Unless specified, tolerance is ±0.010 (±0,25).
0.56
14,22
0
10
100
1000
0.12
3,05
10000
Frequency (kHz)
Recommended
Land Pattern
0.16
4,06
Terminations RoHS compliant gold over nickel over phos bronze.
Weight 260 – 300 mg
Ambient temperature –40°C to +125°C
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Temperature coefficient of inductance +300 to +1100 ppm/°C
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 3000 per 13″ reel Plastic tape: 24 mm wide,
0.3 mm thick, 8 mm pocket spacing, 2.74 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Dimensions are in
0.32
8,13
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 311-2 Revised 02/19/09
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.