www.osram.com/flex LINEARLIGHT FLEX SHORTPITCH LF06S TECHNICAL DATASHEET Key Features & Benefits ‒ ‒ ‒ ‒ ‒ ‒ High-density LED light source Linear separable LED strip on flexible printed circuit board with self-adhesive back High quality single PCB from continuous reel-to-reel production for improved reliability Current control technology for constant flux level along the module Fine white binning (3 steps MacAdam ellipse) PWM Dimmable Possible Applications ‒ ‒ ‒ Architectural lighting / integration Coves, hand rails, walls, edge coupling, et.al. Object lighting / integration Signage application QUICK REFERENCE Product Order Code Color K V W/m lm/m lm/W Beam Angle (°) Shipping Units LF06S-W3F-824 4052899942776 white 2400 24 8.9 750 84 120 8 LF06S-W3F-827 4008321973887 white 2700 24 9.7 780 81 120 8 LF06S-W3F-830 4008321973894 white 3000 24 9.7 780 81 120 8 LF06S-W3F-840 4008321973900 white 4000 24 9.7 850 88 120 8 LF06S-W3F-850 4008321973917 white 5000 24 9.7 850 88 120 8 LF06S-W3F-865 4008321973924 white 6500 24 9.7 850 88 120 8 Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures a nd do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Subject to change without notice. Errors and omissions excepted. Version: 2016-04-07 01 LINEARLIGHT FLEX SHORTPITCH | LF06S | TECHNICAL DATASHEET TECHNICAL OPERATING DATA FOR COMPLETE REEL Product Order Code Power [W] Current [A] LF06S-W3F-824 Luminous Flux [lm] Module Length [m] 4052899942776 53.4 2.2 4,500 6 LF06S-W3F-827 4008321973887 58.0 2.4 4,680 6 LF06S-W3F-830 4008321973894 58.0 2.4 4,680 6 LF06S-W3F-840 4008321973900 58.0 2.4 5,080 6 LF06S-W3F-850 4008321973917 58.0 2.4 5,080 6 LF06S-W3F-865 4008321973924 58.0 2.4 5,080 6 Technical Specifications GENERAL Dimmable Pulse width modulation (PWM) Binning Fine white (3 step MacAdam ellipse) Lifetime 50,000 h (L70B50, Tc max) Adhesive tape on backside 3M F 9460 Complementary systems CONNECTsystem, SLIMCONNECTsystem, SLIM TRACK, OPTOTRONIC Certifications CE, UL8750 recognized, UL2108 listed, ENEC, EAC, RoHS compliant OPERATING CONDITIONS Operating temperature at Tc-Point [°C] -30 – 75 Storage temperature [°C] -40 – 85 Voltage range [V dc] 23 – 25 Reverse Voltage [V dc] 25 ‒ ‒ ‒ Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED Module. Exceeding maximum ratings for operating voltage will cause hazardous overload and will likely destroy the LED Module. The temperature of the LED module must be measured at the Tc-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. For exact location of the Tc -point see drawing below. Technical Drawings Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect st atistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Subject to change without notice. Errors and omissions excepted. Version: 2016-04-07 02 LINEARLIGHT FLEX SHORTPITCH | LF06S | TECHNICAL DATASHEET Safety information ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ The LED module itself and all its components must not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board. Installation of LED modules (with power supplies) needs to be made with regard to all app licable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Observe correct polarity! Depending on the product incorrect polarity will lead to emission of red or no light. The module can be destroyed! Correct polarity immediately! Parallel connection is highly recommended as safe electrical operation mode. Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the LED module. Please ensure that the power supply is of adequate power to operate the total load. When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation at soldering points between module and the mounting surface. The maximum length of LF06S is 6m with power feed at one end. Pay attention to standard ESD precautions when installing the module. The module, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion. The ability to customize the length of the module by cutting at specifically marked points is a key feature of the product and hence the reason for no factory installed conformal coating. For these reasons, it is recommended that the user complete all module modifications first (cutting wiring) and then app ly a conformal coating in the final stages of installation. Damage by corrosion will not be honored as a materials defect claim. It is the user´s responsibility to provide suitable protection again corrosive agents such as moisture and condensation and oth er harmful elements. For applications involving exposure to humidity and dust the module must be protected by a fixture or housing with a suitable protection class. The module can be protected against condensation water by treatment with an appropriate circuit board grade conformal coating. The conformal coating should have the following features: o o o o o Optical transparency UV-resistance Thermal expansion matching the thermal expansion of the module Low permeability of steam for all climatic conditions Resistance against corrosive environment. In order to drive OSRAM LED-Modules safely, it is absolutely necessary to operate them with an electronically stabilized power supply protecting against short circuits, overload and overheating. To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be ENEC certified. In Europe the declarations of conformity must include the following standards: CE: EC 6134 7-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384. Also check for the mark of an independent authorized certification institute. Please see the relevant brochure for more detailed information (see "Related and Further Information") OSRAM OPTOTRONIC® control gear complies with all relevant standards and guarantees safe operation. Assembly Information ‒ ‒ ‒ ‒ Connection with soldering wires on unmounted module: Do not pre-tin the solder-pads but pre-tin the wires and solder for max 4s at 300°C. Allow solder-points to completely cool down before the next soldering. Prevent shear- or peel forces. Soldering of wires with the module mounted on a heatsink: Pre-tin solder-pads and wires and solder for max 3 s at 350 °C. Allow solder-points to completely cool down before the next soldering. Prevent shear- or peel forces. The smallest unit (50 mm – 6 LEDs) can be removed by cutting with scissors between the designated solder pads. Mounting of the module is facilitated by the double-sided adhesive tape on the back-surface of the module. Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect st atistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Subject to change without notice. Errors and omissions excepted. Version: 2016-04-07 03 LINEARLIGHT FLEX SHORTPITCH | LF06S | TECHNICAL DATASHEET ‒ ‒ ‒ ‒ ‒ ‒ Mounting surface must be clean and dry, free of oils or silicone coatings as well as dirt particle. The mounting substrate must have sufficient structural integrity. Take care to completely remove the protective backing. Once the module is appropriately positioned, pre on the module with about 20N/cm² (refer to application techniques of 3M adhesive transfer tapes). In difficult cases the use of a prime may help. Maximum temperature ratings must be kept. Therefore the module may have to be mounted on a metal heat sink, depending on the individual installation. The minimum bending radius is 2 cm. The module may be bent over a smaller radius but only in regions of the circuit board containing electronic components and such bends should be made once and fixed in position to avoid cyclic fatigue. Bending is only allowed within the bending axis of the PCB. Bending outside of that leads to torsion which may cause damage to the module and will lead to failure. When installing in environments with large variations in temperature (e.g. outdoor applications) and operating length of more than 2 m, the use of adequate mounting surfaces is necessary. Otherwise it is advisable to use an additional thicker adhesive tape to absorb the stress of any mismatch in expansion. Complementary Systems & Accessories SLIMCONNECT SYSTEM Description Product name Order Code Shipping details 2pin Feeder LF-2PIN Flex SC 4008321832436 Jumper (board-to-board) LF-CONN Flex SC 4008321832467 25 / 250 Extension wire 30mm LF-WIRE-30 FLEX SC 4008321875587 100 / 10,000 Extension wire 150mm LF-WIRE-150 FLEX SC 4008321875563 50 / 5,000 Description Product name Order Code 2pin Feeder LF-2PIN FLEX 4008321955326 10 / 100 Jumper (10mm extension) LF-CONN-10 FLEX 4008321955333 10 / 200 Jumper (150mm extension) LF-CONN-150 FLEX 4008321955340 10 / 100 Description Product name Order Code SLIM TRACK LF-LTS-2100 SLIM TRACK 4008321978981 40 Mounting Bracket for SLIM TRACK LF-LTS-MB 4008321979025 35 / 280 Clear SLIM TRACK Cover LF-LTS COVER C 4008321790187 40 High Diffuse SLIM TRACK Cover LF-LTS-COVER-DIFFUSE 4008321979001 40 Endcap for Diffuse Cover LF-LTS-ENDCAP 4008321979049 20 / 160 Diffuse SLIM TRACK Cover (recommended) LF-LTS COVER S 4008321790200 40 10 / 250 CONNECT SYSTEM Shipping details SLIMTRACK SYSTEM Shipping details Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect st atistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Subject to change without notice. Errors and omissions excepted. Version: 2016-04-07 04 LINEARLIGHT FLEX SHORTPITCH | LF06S | TECHNICAL DATASHEET OPTOTRONIC Recommended OPTOTRONIC® drivers EAN Non-dimmable OPTOTRONIC OT 6/200-240/24 CE 4008321113269 OPTOTRONIC OT 8/200-240/24 4008321040169 OPTOTRONIC OT 20/220-240/24 4050300618111 OPTOTRONIC OT 20/120-240/24 S 4050300662626 OPTOTRONIC OT 75/220-240/24 4050300817477 OPTOTRONIC OT 75/220-240/24 E 4008321362476 OPTOTRONIC OT 80/220-240/24 P 4008321981684 OPTOTRONIC OT 120/220-240/24 P 4008321981707 OPTOTRONIC OT 240/220-240/24 P Dimmable 4008321981721 OPTOTRONIC OT EASY 60 II 4008321187796 OPTOTRONIC OT EASY 80 4008321808363 OPTOTRONIC OT 65/220-240/24 3DIM E 4008321964403 OPTOTRONIC OTi DALI 75/220-240/24 1-4 CH 4008321371560 OPTOTRONIC OT 80/220-240/24 DIM P 4008321981677 OPTOTRONIC OT 120/220-240/24 DIM P 4008321981691 OPTOTRONIC OT 240/220-240/24 DIM P 4008321981714 Please consider that lengths may differ if further controls are installed. Maximim length per OT: lA + lB + l C + … l max/OT lA Maximum length per strip: lB lA lB lC l… OT – 24V lC ≤ ≤ ≤ ≤ 6,000 6,000 6,000 6,000 mm mm mm mm Global order information EUROPE/MEA US/CA LF06S-W3F-824 4052899942776 LF06S-W3F-827 4008321973887 L58LFE/24V/827/SP 71390 LF06S-W3F-830 4008321973894 L58LFE/24V/830/SP 71389 LF06S-W3F-840 4008321973900 L58LFE/24V/840/SP 71388 LF06S-W3F-850 4008321973917 LF06S-W3F-865 4008321973924 Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect st atistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Subject to change without notice. Errors and omissions excepted. Version: 2016-04-07 05 www.osram.com/flex LINEARLIGHT FLEX SHORTPITCH LF06S TECHNICAL DATASHEET 2016-04-07 Related and further information ‒ ‒ ‒ OSRAM LED Systems www.osram.com/led-systems OSRAM: FLEXIBLE LED MODULES www.osram.com/flex OSRAM catalogue http://catalog.osram.com ‒ General information www.osram.com OSRAM GmbH Head Office: Marcel-Breuer-Strasse 6 80807 Munich, Germany +49 89 6213-0 www.osram.com Sales and technical support is given by the local OSRAM subsidiaries. On the OSRAM website all subsidiaries are listed with complete address and phone numbers.