S6SBP201A1AVA1001, S6SBP202A1FVA1001, S6SBP203A8FVA1001 Evaluation Kit for Automotive PMIC Operation Manual Publication Number S6SBP201A1AVA1001_SS901-00043 CONFIDENTIAL Revision 1.0 Issue Date September 3, 2015 v1.1 O P E R A T I O N M A N U A L Preface This manual explains how to use the evaluation board. Be sure to read this manual before using the product. For this product, please consult with sales representatives or support representatives. Handling and Use Handling and use of this product and notes regarding its safe use are described in the manuals. Follow the instructions in the manuals to use this product. Keep this manual at hand so that you can refer to it anytime during use of this product. Notice on this Document All information included in this document is current as of the date it is issued. Such information is subject to change without any prior notice. Please confirm the latest relevant information with the sales representatives. 2 CONFIDENTIAL S6SBP201A1AVA1001_SS901-00043-1v0-E, September 3, 2015 v1.1 O P E R A T I O N M A N U A L Caution of the Products Described in this Document The following precautions apply to the product described in this manual. WARNING Electric Shock, Damage Electric Shock, Damage Indicates a potentially hazardous situation which could result in death or serious injury and/or a fault in the user’s system if the product is not used correctly. Before performing any operation described in this manual, turn off all the power supplies to the system. Performing such an operation with the power on may cause an electric shock or device fault. Once the product has been turned on, do not touch any metal part of it. Doing so may cause an electric shock or device fault. Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this CAUTION product or devices connected to it, or may cause to loose software resources and other properties such as data, if the device is not used appropriately. Before moving the product, be sure to turn off all the power supplies and unplug the cables. Cuts, Damage Watch your step when carrying the product. Do not use the product in an unstable location such as a place exposed to strong vibration or a sloping surface. Doing so may cause the product to fall, resulting in an injury or fault. Cuts The product contains sharp edges that are left unavoidably exposed, such as jumper plugs. Handle the product with due care not to get injured with such pointed parts. Do not place anything on the product or expose the product to physical shocks. Do not carry the Damage product after the power has been turned on. Doing so may cause a malfunction due to overloading or shock. Since the product contains many electronic components, keep it away from direct sunlight, high Damage temperature, and high humidity to prevent condensation. Do not use or store the product where it is exposed to much dust or a strong magnetic or electric field for an extended period of time. Inappropriate operating or storage environments may cause a fault. Damage Use the product within the ranges given in the specifications. Operation over the specified ranges may cause a fault. To prevent electrostatic breakdown, do not let your finger or other object come into contact with Damage the metal parts of any of the connectors. Before handling the product, touch a metal object (such as a door knob) to discharge any static electricity from your body. When turning the power on or off, follow the relevant procedure as described in this document. Damage Before turning the power on, in particular, be sure to finish making all the required connections. Furthermore, be sure to configure and use the product by following the instructions given in this document. Using the product incorrectly or inappropriately may cause a fault. Because the product has no casing, it is recommended that it be stored in the original Damage packaging. Transporting the product may cause a damage or fault. Therefore, keep the packaging materials and use them when re-shipping the product. September 3, 2015, S6SBP201A1AVA1001_SS901-00043-1v0-E CONFIDENTIAL 3 V1.1 O P E R A T I O N M A N U A L Table of Contents 1. Description ............................................................................................................................................... 5 2. Evaluation Board Specification .............................................................................................................. 6 3. Pin Descriptions ...................................................................................................................................... 7 3.1 Input/Output Pin Descriptions ......................................................................................................... 7 3.2 Jumper Descriptions ....................................................................................................................... 7 4. Setup......................................................................................................................................................... 8 4.1 Connecting ..................................................................................................................................... 8 4.2 Verification ...................................................................................................................................... 8 5. Layout ....................................................................................................................................................... 9 5.1 Component Layout ......................................................................................................................... 9 5.2 Wiring Layout ............................................................................................................................... 10 6. Circuit Schematic .................................................................................................................................. 11 7. Component List ..................................................................................................................................... 12 8. Ordering Information ............................................................................................................................. 13 9. Major Changes ....................................................................................................................................... 13 Figures Figure 1-1 Board Outline ............................................................................................................................ 5 Figure 2-1 Evaluation Board Specification ................................................................................................. 6 Figure 4-1 Connecting the Board and Some Equipment ............................................................................ 8 Figure 5-1 Evaluation Board Component Layout ....................................................................................... 9 Figure 5-2 Evaluation Board Wiring Layout .............................................................................................. 10 Figure 6-1 Evaluation Board Circuit Schematic ......................................................................................... 11 Tables Table 3-1 Input/Output Pin Descriptions ..................................................................................................... 7 Table 3-2 Jumper Descriptions ................................................................................................................... 7 Table 7-1 Evaluation Board Component List ............................................................................................ 12 Table 8-1 Ordering Information ................................................................................................................. 13 Table 9-1 Major Changes ......................................................................................................................... 13 4 CONFIDENTIAL S6SBP201A1AVA1001_SS901-00043-1v0-E, September 3, 2015 v1.1 S6SBP201A1AVA1001, S6SBP202A1FVA1001, S6SBP203A8FVA1001 Evaluation Kit for Automotive PMIC Operation Manual 1. Description S6SBP201A1AVA1001, S6SBP202A1FVA1001 and S6SBP203A8FVA1001 are the evaluation kit for primary power block of automotive. These boards implement power management IC S6BP201A, S6BP202A, S6BP203A each. It is necessary to prepare DC power supply. Figure 1-1 Board Outline S6SBP201A1AVA1001 S6SBP202A1FVA1001 S6SBP203A8FVA1001 VIN VBATf DC Power Supply 2.5V to 42V PGND1f π Type Filter S6BP201A : PMIC S6BP202A : PMIC S6BP203A : PMIC ENA Buck-Boost C-mode DC/DC VOUTf PGND2f VOUT 5.000V / 1.0A: S6SBP201A1AVA1001 5.000V / 2.4A: S6SBP202A1FVA1001 3.3V / 2.4A: S6SBP203A8FVA1001 Regulator MODE SYNC Chip Control Sync/OSC September 3, 2015, S6SBP201A1AVA1001_SS901-00043-1v0-E CONFIDENTIAL PG 5 V1.1 O P E R A T I O N 2. M A N U A L Evaluation Board Specification Figure 2-1 Evaluation Board Specification Item Symbol Min. Typ. Max. Unit VIN 2.5 12 42 V VOUT - 5.0 - V Output Current IOUT - - 1.0 A Output Voltage VOUT - 5.0 - V Output Current IOUT - - 2.4 A Output Voltage VOUT - 3.3 - V Output Current IOUT - - 2.4 A Input Voltage S6SBP201A1AVA1001 S6SBP202A1FVA1001 S6SBP203A8FVA1001 6 CONFIDENTIAL Output Voltage S6SBP201A1AVA1001_SS901-00043-1v0-E, September 3, 2015 v1.1 O P E R A T I O N 3. M A N U A L Pin Descriptions 3.1 Input/Output Pin Descriptions Table 3-1 Input/Output Pin Descriptions Connecter Symbol 3.2 I/O Function Description VBATf I DC power supply terminal VOUTf O DC/DC converter output terminal ENA I DC/DC converter enable terminal MODE I PFM/PWM mode control terminal SYNC I External clock input terminal PG O DC/DC converter power good terminal PGND1f,PGND2f - Ground terminal Jumper Descriptions Table 3-2 Jumper Descriptions Jumper Description Initial Setting Shorted between VIN and ENA pin JP1 JP1 Short: ENA pin is set to the H level. JP1 Open: ENA pin is set to the L level. Input external signal to ENA pin. Open Don’t input external signal to EN1 pin with shorted JP1. Shorted between VOUTf and MODE pin JP3 Short: Fixed PWM operation. JP3 JP3 Open: Automatic PWM/PFM switching operation. Don’t input external signal to MODE pin with shorted JP3. Open In case of providing external clock to SYNC, the mode is fixed PWM operation. September 3, 2015, S6SBP201A1AVA1001_SS901-00043-1v0-E CONFIDENTIAL 7 V1.1 O P E R A T I O N 4. M A N U A L Setup 4.1 Connecting 1. Connect the board to the power supply, load equipment and voltage meter as below. Figure 4-1 Connecting the Board and Some Equipment +12V Power Supply + - Voltage + Meter + 4.2 Load Verification 1. Turn on +12V power supply. 2. Connect ENA pin to VBATf, then, DC/DC converter will start output. 3. Check that VOUTf is the same as the 'Output Voltage' of Figure 2-1 Evaluation Board Specification. 8 CONFIDENTIAL S6SBP201A1AVA1001_SS901-00043-1v0-E, September 3, 2015 v1.1 O P E R A T I O N 5. M A N U A L Layout 5.1 Component Layout Figure 5-1 Evaluation Board Component Layout Layer1 Top View Layer4 Top View Board size: 65mm × 65mm September 3, 2015, S6SBP201A1AVA1001_SS901-00043-1v0-E CONFIDENTIAL 9 V1.1 O P E R A T I O N 5.2 M A N U A L Wiring Layout Figure 5-2 Evaluation Board Wiring Layout 10 CONFIDENTIAL layer 1 Top View layer 2 Top View layer 3 Top View layer 4 Top View S6SBP201A1AVA1001_SS901-00043-1v0-E, September 3, 2015 v1.1 O P E R A T I O N 6. M A N U A L Circuit Schematic Figure 6-1 Evaluation Board Circuit Schematic VIN FB1 VBATf L2 ＋ C6-2 C7 PGNDf VIN VIN 5 PVIN 3 VIN VCC 8 C1-1 VCC R2 C5-1 M1 13 FB VOUT 7 MODE MODE JP3 VOUT 11 SYNC SYNC VIN JP1 6 ENA 9 C2 LX1 2 L1 LX2 15 VOUT 14 D3 VOUT C4-1 C4-2 C4-3 VCC R6 PG 10 VOUTf PGND2f ENA GND1 VCC PGND1 1 PGND2 16 12 RT R1 C3-2 C3-1 BST 4 VOUT R7 PG 17 GND2 EP September 3, 2015, S6SBP201A1AVA1001_SS901-00043-1v0-E CONFIDENTIAL 11 V1.1 O P E R A T I O N 7. M A N U A L Component List Table 7-1 Evaluation Board Component List Rated Rated Voltage(V) Current(A) 0.1 µF 50 - - 0.1 µF 50 - - TDK 10 µF 50 - - TDK 0.1 µF 50 - - CGA6P1X7R1C226M250AC TDK 22 µF 16 - - CGA6P1X7R1C226M250AC TDK 22 µF 16 - - CGA2B3X7R1H104K050BB TDK 0.1 µF 50 - - C5-1 CGA4J3X7R1C475K125AB TDK 4.7 µF 16 - - C6-1 CGA5L3X7R1H475K160AB TDK 4.7 µF 50 - - 10 C6-2 CGA2B3X7R1H104K050BB TDK 0.1 µF 50 - - 11 C7 - - - - - No. Component Parts Number Vendor Value 1 C1-1 CGA2B3X7R1H104K050BB TDK 2 C2 CGA2B3X7R1H104K050BB TDK 3 C3-1 CGA9N3X7R1H106K230KB 4 C3-2 CGA2B3X7R1H104K050BB 5 C4-1 6 C4-2 7 C4-3 8 9 Remarks NMT S6SBP201A1AVA1001, 12 D3 - - - - - S6SBP202A1FVA1001 RB521S30T1G ON Semi - 30 0.2 S6SBP203A8FVA1001 NMT 13 FB1 RK73Z2A KOA 0Ω - 2 - 14 L1 CLF7045T-2R2N-D TDK 2.2 µH - 7.3 - 15 L2 CLF7045T-4R7N-D TDK 4.7 µH - 3.6 - 16 M1 Cypress - - - 17 R1 RK73H1JTTD2202F KOA 22 kΩ - - - 18 R2 RK73Z1E KOA 0Ω - 1 - 19 R6 - - - - - NMT 20 R7 RK73H1JTTD1003F KOA 100 kΩ - - - S6BP201A1AST2B000 S6BP202A1FST2B000 S6SBP201A1AVA1001 S6BP203A8FST2B000 TDK : S6SBP202A1FVA1001 S6SBP203A8FVA1001 TDK Corporation ON Semi : ON Semiconductor KOA : KOA Corporation Cypress : Cypress Semiconductor Corp NMT: No mount. These components are compliant with RoHS, and please ask each vendor for details if necessary. 12 CONFIDENTIAL S6SBP201A1AVA1001_SS901-00043-1v0-E, September 3, 2015 v1.1 O P E R A T I O N 8. M A N U A L Ordering Information Table 8-1 Ordering Information Part Number EVB Revision Note S6SBP201A1AVA1001 S6SBP201A-VA1 Mounted IC: S6BP201A1AST2B000 S6SBP202A-VA1 S6SBP202A1FVA1001 S6SBP203A8FVA1001 9. Mounted IC: S6BP202A1FST2B000 S6SBP203A-VA1 Mounted IC: S6BP203A8FST2B000 Rev 2.0 Major Changes Table 9-1 Major Changes Page Section Change Results Revision 1.0 - - Initial release September 3, 2015, S6SBP201A1AVA1001_SS901-00043-1v0-E CONFIDENTIAL 13 V1.1 O P E R A T I O N 14 CONFIDENTIAL M A N U A L S6SBP201A1AVA1001_SS901-00043-1v0-E, September 3, 2015 v1.1 O P E R A T I O N M A N U A L SS901-00043-1v0-E Cypress Support Tool Manual S6SBP201A1AVA1001, S6SBP202A1FVA1001, S6SBP203A8FVA1001 Evaluation Kit for Automotive PMIC Operation Manual September 2015 Rev. 1.0 Published: Edited: Cypress Semiconductor Corp. Communications September 3, 2015, S6SBP201A1AVA1001_SS901-00043-1v0-E CONFIDENTIAL 15 V1.1 O P E R A T I O N M A N U A L Colophon The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for any use that includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for any use where chance of failure is intolerable (i.e., submersible repeater and artificial satellite). Please note that Cypress will not be liable to you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Law of Japan, the US Export Administration Regulations or the applicable laws of any other country, the prior authorization by the respective government entity will be required for export of those products. Trademarks and Notice The contents of this document are subject to change without notice. This document may contain information on a Cypress product under development by Cypress. Cypress reserves the right to change or discontinue work on any product without notice. The information in this document is provided as is without warranty or guarantee of any kind as to its accuracy, completeness, operability, fitness for particular purpose, merchantability, non-infringement of third-party rights, or any other warranty, express, implied, or statutory. Cypress assumes no liability for any damages of any kind arising out of the use of the information in this document. ® Copyright © 2015 Cypress Semiconductor Corp. All rights reserved. Cypress, the Cypress logo, Spansion , the Spansion ® ® TM TM TM TM logo, MirrorBit , MirrorBit Eclipse , ORNAND , Easy DesignSim , Traveo and combinations thereof, are trademarks and registered trademarks of Cypress Semiconductor Corp. in the United States and other countries. Other names used are for informational purposes only and may be trademarks of their respective owners. 16 CONFIDENTIAL S6SBP201A1AVA1001_SS901-00043-1v0-E, September 3, 2015 v1.1