SMA Packing information B001, Rev. - 1. Finish Goods PKG photo 2. Packing method Fig.1- Reel pack for SMD • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SMA Packing information B001, Rev. - Table 1. Packing information Package version Reel dimensions φ×H (mm) Pcs/reel Reels per box Inner box dimensions L×W×H (mm) SMA Φ330*16.8 5000 2 335*335*40 3. Product orientation Standard product orientation SMA direction of feed Fig 2. Product orientation in carrier tape 4. Carrier tape dimensions Fig 3. Carrier tape dimensions • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SMA Packing information B001, Rev. - 5. Reel dimensions Fig 4. Reel dimensions Table 2. Carrier tape dimensions ITEM SYMBOL DO214AC(SMA) mm(inch) Carrier width A 3.07±0.1(0.121±0.004) Carrier length B 5.80±0.1(0.228±0.004) Carrier depth C 2.42±0.1(0.095±0.004) 1.5±0.1(0.059±0.004) Sprocket hole d Reel outside diameter D 330±2.0(13±0.79) Reel inner diameter D1 8.0±0.2(0.315±0.008) Feed hole diameter D2 13±0.5(0.512±0.020) Sprocket hole position E 1.5±0.1(0.059±0.004) Punch hole position F 5.65±0.05(0.222±0.002) Punch hole pitch P 4.0±0.1(0.175±0.004) Sprocket hole pitch P0 4.0±0.1(0.157±0.004) Embossment center P1 2.0±0.1(0.079±0.004) Total tape thickness T 0.30±0.05(0.012±0.002) Tape width W 12.0±0.2(0.472±0.008) Reel width W1 16.8±2.0(0.661±0.079) • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •