TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 836.5 MHz 25MHz Bw SMD 3.0×3.0mm MODEL NO.: TA0169A REV. NO.:6 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 0 V RoHS Compliant Lead free Lead-free soldering 3.Operating Temperature: -30°C to +85°C 4.Storage Temperature: -40°C to +85°C Electrostatic Sensitive Device (ESD) B. ELECTRICAL CHARACTERISTICS: Item Center frequency Fc (dB) Insertion loss within 824 ~849 MHz IL (dB) Amplitude ripple (p-p) within 824 ~ 849 MHz (dB) Attenuation (Reference level from 0 dB) D.C. ~ 800 MHz (dB) 869 ~ 894 MHz (dB) 978 ~ 1006 MHz (dB) 1050 ~ 2500 MHz (dB) VSWR within 824 ~849 MHz Source impedance Zs (Ω) Load impedance ZL (Ω) Min. Typical Max. - 836.5 2.1 1.2 3.0 2.0 23.0 29.0 25.0 15.0 - 26.0 32.0 28.0 18.0 1.8 50 50 2.3 - Note1. No matching network required for operation at 50 Ω MEASUREMENT CIRCUIT: HP Network analyzer 50Ω B SAW Filter E 50Ω A,C,D,F TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D.Reflections Functions : S11: S22: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 E. OUTLINE DRAWING: W 9 △ □ B : Intput E : Output A,C,D,F : Ground Unit : mm △ : Year Code (2011->1, 2012->2, …, 2019->9) □ : Date Code (Follow the table from planner each year) Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z F. LAND PATTERN: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) W9 TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 H. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7