TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com RF SAW Filter 836.5 MHz 25MHz Bw for CDMA Model No.: TA836GG Rev. No.:3 A. MAXIMUM RATING: 1.Input Power Level: +15 dBm 2.DC voltage: -5~+5 V RoHS Compliant Lead free Lead-free soldering 3.Operating Temperature: -30°C ~ +85°C 4.Storage Temperature: -40°C ~ +100°C Electrostatic Sensitive Device (ESD) B. ELECTRICAL CHARACTERISTICS: Characteristics Center frequency FC MHz Insertion loss (824 ~ 849 MHz) I.L. dB V.S.W.R (824 ~ 849 MHz) dB Ripple (824 ~ 849 MHz) dB Attenuation: ( Reference level from 0 dB) 1) D.C. ~ 800 MHz dB 2) 869 ~ 1049 MHz dB 3) 1049 ~ 1200 MHz dB 4) 1200 ~ 2000 MHz dB Min. Value Typ. Max. - 836.5 - - 2.8 1.6 0.7 3.5 2.0 1.6 - 50 28 50 45 55.8 31.2 57.1 48.6 - - Impedance at FC ; Input ZIN =RIN//CIN Output ZOUT =ROUT//COUT Note 50Ω // 0 PF - 50Ω // 0 PF - Network analyzer E B 50Ω SAW Filter 50Ω A、C、F、D TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 - C. FREQUENCY RESPONSE: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - D. VSWR AND SMITH CHART: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - E. OUTLINE DRAWING: T △ □ B B : Intput E : Output A,C,D,F : Ground Unit : mm △ : Year Code (2011->1, 2012->2, …, 2019->9) □ : Date Code (Follow the table from planner each year) Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z F. LAND PATTERN: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - G. PACKING: 1. REEL DIMENSION (Reel Count : 7”=1000 ; 13”=3000 or per the request of customer order ) TB TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 - H. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 7 -