TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 465MHz SMD 5.2X4.8mm TST Parts No.: TA465GC Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Vincent Lee Date: Feb. 5, 2001 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-03S06-02 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Road., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 465MHz For Pager MODEL NO.: TA465GC A. REV. NO.: 1 MAXIMUM RATING: 1. Input Power Level: 0 dBm 2. DC voltage: 10 V 3. Operating Temperature: -10°C to +50°C 4. Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Characteristics Specification Note 465.1375 4max. 2.0 max. 1 1 50 min. 15 min. 50 min. 1 1 1 81.5-j87ohm 2 81.5-j87ohm 2 Center frequency FC (MHz) I.L. ( FC +/- 2.5875 MHz) (dB) Ripple( FC +/- 2.5875 MHz) (dB) Attenuation:( Reference level from 0 dB) (dB ) 1) FC-100 ~ FC-40.8MHz (dB ) 2) 451.5 ~ 457.0 MHz (dB ) 3) FC+30 ~ FC+100 MHz (dB ) Impedance at FC ; Input Impedance Output Impedance Note1. The standard definitions is in JIS C 6703 Note2. Source im pedance 50Ω Load impedance 50Ω Z IN =81.5-j87ohm TAI-SAW TECHNOLOGY CO., LTD. Z O UT =81.5-j87ohm 1 FREQUENCY CHARACTERISTICS: TA465GC 0 -10 Att.(dB) -20 -30 -40 -50 -60 -70 -80 415 425 435 445 455 465 475 Freq.(MHz) 485 495 505 515 467 468 469 470 TA465GC 0 -1 -2 -3 Att.(dB) C. -4 -5 -6 -7 -8 -9 -10 460 461 462 463 TAI-SAW TECHNOLOGY CO., LTD. 464 465 466 Freq.(MHz) 2 D. MEASUREMENT CIRCUIT: HP Network analyzer 50Ω C SAW Filter 50Ω G 27nH 27nH 1pF 1pF A,B,D,E,F,H E. OUTLINE DRAWING: TAI-SAW TECHNOLOGY CO., LTD. 3 F. PACKING: 1. REEL DIMENSION 465 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. 4