TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Name: SAW Filter 1960 MHz Band 2 SMD 1.1x0.9 mm (BW=60 MHz) TST Parts No.: TA1870C Customer Parts No.: Customer signature required Company: Division: Approved by : Date: Checked by: Hayley Chou Approval by: Andy Yu Date: 2015/12/28 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1960 MHz Band 2 SMD 1.1x0.9 mm (BW=60 MHz) MODEL NO.:TA1870C REV.1.0 A. MAXIMUM RATING: 1. Operating temperature range: -30 °C to +90 °C 2. Storage temperature range: -40 °C to +100 °C 3. Maximum Input Power: +10 dBm 4. Maximum DC Voltage: +/-5 V 5. Moisture Sensitivity Level: Level 1 RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device (ESD) B. ELECTRICAL CHARACTERISTICS: Terminating source impedance: Zs = 50 Ω (Single-ended) Terminating load impedance: ZL = 50//4.7nH Ω (Single-ended) Parameters Description Center Frequency Unit Minimum Typical Maximum MHz - 1960 - dB dB - - 2.8 1.3 1.9 2.0 4.0 2.7 2.2 2.3 40 35 35 35 45 40 40 39 2020~2070 MHz dB dB dB dB dB 7 27 - 2070~2400 MHz dB 25 33 - 2400~2500 MHz 2500~3780 MHz dB dB 33 28 43 40 - 3780~3980 MHz dB 30 39 - 3980~5790 MHz 5790~5970 MHz 5970~7720 MHz 7720~7960 MHz 7960~8000 MHz dB dB dB dB 21 21 21 17 17 31 31 31 27 27 - Insertion Loss(*1) Amplitude ripple VSWR(Input) VSWR(Output) Attenuation: DC~960 MHz 1558~1608 MHz 1710~1850 MHz 1850~1910 MHz 1930~1990 MHz 1930~1990 MHz 1930~1990 MHz 1930~1990 MHz - dB (*1) Specification of insertion loss excludes loss that comes from the test board. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARATERISTIC: Frequency Response TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Ripple TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 VSWR (S11) VSWR (S11) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Smith Chart (S11) Smith Chart (S22) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 D. MEASUREMENT CIRCUIT: E. OUTLINE DRAWING: Pin Configuration TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 Top View (Sample Production): Top View (Mass Production): Date Code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8 F. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 9 G. RECOMMENDED REFLOW PROFILE: 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec). 4. Time: 2 times. 10 TAI-SAW TECHNOLOGYTST CO., LTD. DCC Release document