TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Name: IF SAW Filter 374 MHz 10.5MHz BW SMD 5.0mmX5.0mm TST Parts No.:TB0501A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Yu Approval by: Bob Chau Date: 2014/03/19 ____ 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 374MHz SMD 5.0X5.0mm MODEL NO.: TB0501A Rev. No.: 2.0 A. MAXIMUM RATING: RoHS Compliant Lead free Lead-free soldering 1.Operating Temperature: -40 C ~ +85 C 2. Storage Temperature: -40 C ~ +85 C 3. Input Power Level: 10dBm B. Characteristics : 1. Ambient Temperature: 25 C Characteristics Value Min. Center frequency FC MHz Maximum Insertion loss I.L. dB 1dB Bandwidth MHz 10.5 3dB Bandwidth MHz 35dB Bandwidth MHz Passband Ripple in FC±5.25 MHz dB Group Delay Ripple in FC±5.25 MHz nS Temp Coefficient ppm/˚C Attenuation:( Reference level from minimum insertion loss) 1) 279 ~ 346 MHz dB 40 2) 346 ~ 357 MHz dB 40 3) 357 ~ 361 MHz dB 35 4) 387 ~ 391 MHz dB 25 5) 391 ~ 425 MHz dB 30 6) 425 ~ 469 MHz dB 40 TAI-SAW TECHNOLOGY CO., LTD. Max. 374 - 10.0 11.7 13.8 19.9 0.5 35 -25 11.5 1 100 51 50 46 42 47 52 - TST DCC Release document Note. - - - - 2 - C. Frequency Characteristics : 1. S21 Response Fig. 1 Horizontal: 10MHz; Vertical: 10dB/Div 2. Passband Response Fig. 2 Passband Horizontal: 2MHz; Vertical: 1dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - 3. Group Delay Fig. 3 Passband Horizontal: 2MHz; Vertical: 1dB/Div 4. Wide band 5. Fig. 4 Passband Horizontal: 20MHz; Vertical: 10dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - D. Outline Drawing: Tolerance: ±0.13mm 501 Pin configuration #C RF Input #B RF Input ground #G RF Output #F RF Output ground #A,D,E,H To be ground □ : Week Code (Follow the table from planner each year) △ : Product / Year Code Year 2013 2009 2014 2010 2015 2011 2016 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - E. Measurement Circuit: (1) Single end input 50 ohm to Single end output 50 ohm (2) Balanced input 100 ohm to Balanced output 200 ohm F. PCB Footprint TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 - G. PACKING: (1). REEL DIMENSION (Please refer to FR-75D10 for packing quantity) (2). TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 7 - H. RECOMMENDED REFLOW PROFILE: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 8 -