TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 193.7 MHz SMD 9.1mmX7.1mm MODEL NO.: TB0609A Rev. No. V1.0 A. MAXIMUM RATING: 1. Operating Temperature: -40°C to +85°C 2. Storage Temperature: -40°C to +85°C 3. Maximum Input Power : 15dBm RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device (ESD) B. ELECTRICAL CHARACTERISTICS: 1. Ambient Temperature: 25 ° Item Unit MHz Min. - Type. 193.7 Max. - dB - 17.4 18.0 1 dB bandwidth MHz 17.5 18.0 - 3 dB bandwidth MHz - 19.0 20 20 dB bandwidth MHz - 21.3 30 40 dB bandwidth MHz - 22.2 32 dB - 0.7 1.2 ns - 20 60 usec - 1.02 - usec - 1.015 - 40 47 - 35 40 - 550 MHz to 600 MHz 25 30 - 600MHz to 900MHz 20 23 - Center frequency, Fc Insertion Loss, IL Pass band Ripple (p-p) Within Fc+-8.5MHz Group Delay Variation (p-p) Within Fc+-8.5MHz Absolute Group Delay at Fc Absolute Group Delay (mean) Within Fc+-8.5MHz Relative Attenuation 10 MHz to 170 MHz 230 MHz to 550 MHz dB TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARACTERISTICS : 1.S21 Response Fig1. Horizontal: 10MHz/Div Vertical: 10dB/Div Vertical: 1dB/Div 2. Passband Ripple Fig2. Horizontal: 2.5MHz/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 3. Group Delay Ripple: Fig3. Horizontal: 3.0MHz/Div Vertical: 100nS/Div Vertical: 10dB/Div 4. Wide Band Response: Fig3. Horizontal: 10~900MHz TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. MEASUREMENT CIRCUIT 1. Single ended input 50 ohm to Single ended Output 50 ohm Note: The matching structure will change according to different test fixture. E.OUTLINE DRAWING: Pin c : RF Input Pin h : RF Output Pin a,b,d,e,f,g,j,k : Ground Unit: mm □ : Week Code (Follow the table TAI-SAW from planner each year) △ : Product / Year Code TECHNOLOGY CO., LTD. TST DCC Release document 5 Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b F. PCB Footprint Unit: mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. PACKING: 1. REEL DIMENSION Unit: mm 2. TAPE DIMENSION Unit: mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8