TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Jul, 31, 2002 Product Name: SAW Filter 360 MHz SMD3.8x3.8 mm TST Parts No.:TB360EC Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Vincent Lee Date: Jul, 31, 2002 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-03S06-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 360MHz MODEL NO.: TB360EC REV. NO.:3 A. MAXIMUM RATING: 1.Input Power Level: 5 dBm 2.Operating Temperature: -20°C to 75°C 3.Storage Temperature: -35°C to 85°C B. ELECTRICAL CHARACTERISTICS: Item Unit Center frequency, Fc MHz Min. - Type. 360 Max. - Note 1 Insertion Loss, IL dB - 4.2 5.0 1 Passband Ripple in Fc±67.7KHz, dB - 0.4 1.5 1 μs - 0.5 2.0 1 Group delay ripple in Fc±67.76KHz, GD Attenuation:(Reference level from Min IL) Fc ± 0.4 to Fc ± 0.6 MHz dB 29 40 - Fc ± 0.6 to Fc ± 0.8 MHz dB 42 70 - Fc - 0.8 to Fc – 3.0 MHz dB 50 61 - Fc – 3.0 to Fc – 57 MHz dB 52 62 - Fc – 57 to Fc – 77 MHz dB 49 69 - Fc – 77 to Fc – 115 MHz dB 52 69 - Fc + 0.8 to Fc + 1.6 MHz dB 50 61 - Fc + 1.6 to Fc + 3.0 MHz dB 45 65 - Fc + 3.0 to Fc + 115 MHz dB 52 58 - Note1. The standard definitions is in JIS C 6703 S o u rc e im p e d a n c e L o a d im p e d a n c e 50Ω 50Ω Z IN = 9 4 9 Ω // -2 .8 4 p F Z O U T = 9 4 9 Ω // -2 .8 4 p F TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: D. MEASUREMENT CIRCUIT: 50 Ohm Test circuit 1 HP Network analyzer IN 47nH 47nH 5 50Ω OUT 1 SAW Filter 50Ω 6 2 47nH 47nH 3,4,7,8 50 Ohm Test circuit 2 HP Network analyzer IN 3.3pF 56nH 56nH 5 50Ω SAW Filter 3.3pF 50Ω 2 6 3.9pF OUT 1 3.9pF 3,4,7,8 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PACKING: 1. REEL DIMENSION 2.TAPE DIMENSION SE 360 Note 1 DIMENSION : mm Direction of feed Note : 1. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. Reflow Profile: 1. Preheating shall be fixed at 140 ~ 160 ℃ for 60 ~ 90 seconds. 2. Ascending time to preheating temperature 150 ℃ shall be 30 seconds min. 3. Heating shall be fixed at 200 ℃ for 50 ~ 60 seconds and at 230±10 ℃ peak. IR-reflow Profile 260 Peak (240℃max) 240 220 200 Go down Temp/degC 180 160 gradually Heating 140 Preheating 120 (200℃) (140~160℃) 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 260 Time/sec 30sec. min 60 ~ 90 sec. 50 ~ 60 sec. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7