¥TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 360 MHz SMD3.8x3.8 mm TST Parts No.:TB360EC Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Francis Chen Date: 2006/03/08 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 360MHz MODEL NO.: TB360EC REV. NO.:4 A. MAXIMUM RATING: 1.Input Power Level: 5 dBm 2.Operating Temperature: -20°C to 75°C 3.Storage Temperature: -35°C to 85°C RoHS Compliant Lead free Lead-free soldering B. ELECTRICAL CHARACTERISTICS: Item Unit Center frequency, Fc MHz Min. - Type. 360 Max. - Note 1 Insertion Loss, IL dB - 4.2 5.0 1 Passband Ripple in Fc±67.7KHz, dB - 0.4 1.5 1 μs - 0.5 2.0 1 Group delay ripple in Fc±67.76KHz, GD Attenuation:(Reference level from Min IL) Fc ± 0.4 to Fc ± 0.6 MHz dB 29 40 - Fc ± 0.6 to Fc ± 0.8 MHz dB 42 70 - Fc - 0.8 to Fc – 3.0 MHz dB 50 61 - Fc – 3.0 to Fc – 57 MHz dB 52 62 - Fc – 57 to Fc – 77 MHz dB 49 69 - Fc – 77 to Fc – 115 MHz dB 52 69 - Fc + 0.8 to Fc + 1.6 MHz dB 50 61 - Fc + 1.6 to Fc + 3.0 MHz dB 45 65 - Fc + 3.0 to Fc + 115 MHz dB 52 58 - Note1. The standard definitions is in JIS C 6703 S o u rc e im p e d a n c e L o a d im p e d a n c e 50Ω 50Ω Z IN = 9 4 9 Ω // -2 .8 4 p F Z O U T = 9 4 9 Ω // -2 .8 4 p F TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: D. MEASUREMENT CIRCUIT: 50 Ohm Test circuit 1 HP Network analyzer IN 47nH 47nH 5 50Ω OUT 1 SAW Filter 50Ω 6 2 47nH 47nH 3,4,7,8 50 Ohm Test circuit 2 HP Network analyzer IN 3.3pF 56nH 56nH 5 50Ω SAW Filter 3.3pF 50Ω 2 6 3.9pF OUT 1 3.9pF 3,4,7,8 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PACKING: 1. REEL DIMENSION 2.TAPE DIMENSION SE 360 Note 1 DIMENSION : mm Direction of feed Note : 1. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. REFLOE PROFILE: Recomended Reflow Profile 240 220 200 180 160 140 120 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 100 80 60 40 20 0 Temp ( Deg C) 280 260 Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7