TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 374MHz SMD 5.0x7.0mm TST Parts No.: TB374EA Customer Parts No.: Company: Division: Approved by : Date: Checked by: C.P. Yang Approval by: Vincent Lee Date: May,02, 2001 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL : 886-3-4690038 FAX : 886-3-4697532 E-mail : [email protected] SAW Filter 374MHz WLAN MODEL NO.: TB374EA REV. NO.:5 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.Operating Temperature: -10°C to 85°C 3.Storage Temperature: -40°C to 85°C B. ELECTRICAL CHARACTERISTICS: Item Unit Center frequency, Fc RoHS Compliant Lead free Lead-free soldering MHz Min. - Type. 374 Max. - Note 1 dB - 8.9 10 1 MHz 17 23 - 1 Amplitude Ripple in Fc±7MHz, AR dB - 0.8 1 1 Group delay ripple in Fc±7MHz, GDT nS - 67 100 1 Triple transit suppression dB 30 38 - 1 Fc -100 to –33MHz dB 45 49 - Fc -33to –22MHz dB 40 51 - Fc -22 to –16.5MHz dB 30 45 - Fc +16.5 to +22MHz dB 30 39 - Fc +22 to +43 MHz dB 35 39 Fc +43 to +100MHz dB 40 45 Insertion Loss, IL Passband width, BW3 Attenuation:(Reference level from Min IL) - Note1. The standard definitions is in JIS C 6703 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 1 C.FREQUENCY CHRACTERISTICS: (1) Wide-band of S21: (2) Amplitude ripple: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 (3) Group delay: (4) Triple transit suppression: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 (5) Smith chart of S11: (6) Smith chart of S22: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. OUTLINE DRAWING: 374 T E□ Pin configuration: I input J input or input ground C output D output or output ground A,G,E,F,K,L case ground B,H to be ground TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 E. measurement circuit: 50Ω unbalanced: 200Ω balanced: (1) (2) ] TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 F. MECHANICAL & ENVIRONMENTAL CHRACTERISTICS: Test Item Shock ( Drop test ) Vibration Condition of Test Requirements random free drops 3 times from height of 0.75 meter onto hardwood board. Total peak amplitude : 1.5mm Vibration frequency : 10 to 55 Hz Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. The specimens shall meet the electrical specifications 75% or more of the immersed surface shall be covered with solder Solderability ( solder heat ) immersed pad in soldering bath at 245±5°C for 5±0.5 seconds. Temperature Characteristics Specimens shall be measured within -10°C to +50°C temperature range Dry heat ( Aging test ) Temperature Duration : 125 ± 2 °C : 250 hours Cold resistance Temperature Duration : -40 ± 3 °C : 96 hours Thermal Shock Heat cycle conditions -55 C 25 C (30 min) (5 min) Cycle time : 5 times The specimens shall meet the electrical specifications 85 C (30 min) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 G. PACKING: 1.REEL DIMENSION TEA 374 2.TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8