TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: 156.525MHz 25kHz BW SMD7.0X5.0mm IF SAW Filter TST Parts No.:TB1198A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Kazuma Lee Approval by: Bob Chau Date: 10 / 06 / 2015 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 156.525MHz 25kHz BW (SMD 7.0×5.0mm) MODEL NO.:TB1198A REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 5V 3. Operating Temperature: -30°C to 65°C 4. Storage Temperature: -40°C to 85°C RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device B. ELECTRICAL CHARACTERISTICS: (Operating temperature: 25°C) Item Unit Center frequency, Fc MHz Min. - Type. 156.525 Max. - Minimum Insertion Loss, (Fc±12.5KHz ) IL dB - 2.8 6.0 Passband Ripple (Fc±12.5KHz ) dB - 0.1 1.0 μs - 0.3 2.5 Group delay ripple (Fc±12.5KHz ), GD Attenuation:(Reference level from Min IL) Fc - 10 ~ Fc - 2 MHz dB 50 60 - Fc - 2 ~ Fc - 1 MHz dB 50 60 - Fc - 1 ~ Fc - 0.35 MHz dB 40 57 - Fc - 0.35 ~ Fc - 0.1 MHz dB 8 20 - Fc + 0.1 ~ Fc + 0.35 MHz dB 8 24 - Fc + 0.35 ~ Fc + 1 MHz dB 40 57 - Fc + 1 ~ Fc + 2 MHz dB 50 57 - Fc + 2 ~ Fc + 10 MHz dB 40 47 - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARACTERISTICS: (1) Narrow band Response: (2) Pass Band Response and Group Delay Response: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 (3) Smith Chart: (4) Wide band Response: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. MEASUREMENT CIRCUIT: 50 Ohm Test circuit (single-ended / single-ended) HP N etwork an aly ze r IN L1 = 1 8 0n H L 1= 1 8 0 n H 9 OUT 4 SAW Filter 10 5 C 1= 2 pF C1 = 2 pF 1 , 2 ,3 , 6 ,7, 8 E.OUTLINE DRAWING: 1198 T △ □ #9 : Input #10 : Input Ground #4 : Output #5 : Output Ground #1,2,3,6,7,8: Ground □: Week Code Unit: mm △ : Product / Year Code Year 2013 2017 2014 2018 2015 2019 2016 2020 Product Code B b B b Week Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w TAI-SAW TECHNOLOGY CO., LTD. x y z TST DCC Release document 5 F. PCB FOOTPRINT: G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 2. TAPE DIMENSION Direction of Feed H.RECOMMENDED REFLOW PROFILE: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7