TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: 836.5 MHz 2MHz BW SMD 3.0 x 3.0 mm SAW RF Filter TST Part No.: TA1415A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Kazuma Lee Approved by: Bob Chau Date: 03 / 10 / 2014 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 836.5 MHz REV. NO:1.0 MODEL NO.:TA1415A A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 12V 3. Operating Temperature: -40°C to +85°C 4. Storage Temperature: -40°C to +85°C RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device B. ELECTRICAL CHARACTERISTICS: Item Center frequency Fc Minimum insertion loss IL(min) Exclude loss in matching elements *1) Incl. loss of matching elements(Q=91) *2) Unit Min. Typ. Max. MHz - 836.5 - dB dB - 2.6 3.0 3.8 4.2 dB - 1.0 3.0 MHz - 4.5 - Passband (relative to ILmin ) *1) 835.50 ~ 837.50 MHz 3dB bandwidth Attenuation (relative to ILmin) *1) 10.000-785.00 MHz dB 40 51 - 785.00-810.00 MHz dB 30 38 - 810.00-829.00 MHz dB 20 29 - 843.00-850.00 MHz dB 15 27 - 850.00-910.00 MHz dB 18 25 - 910.00-1000.0 MHz dB 40 48 - Impedance at Fc, Input *1) Zin = Rin//Cin Zs Impedance at Fc, Output *1) Zout = Rout//Cout ZL 651Ω//1.5pF 598Ω//1.5pF *1): The matching circuit is ideal by simluation. *2): The matching circuit is real by actual passive components. 0805 Coillcraft CS series chip conductor is used for inductor. 0402 muRata GRM series is used for capacitor. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARACTERISTICS: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. MEASUREMENT CIRCUIT: The matching circuit is ideal by simulation L1 L2 C1 C2 L1:28nH,L2:27nH(Ideal value) C1:4pF,C2:4pF(Ideal value) D3 E.OUTLINE DRAWING: Product / Year Code:20100, 20111, … 20199, 20200 … Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v TAI-SAW TECHNOLOGY CO., LTD. w x y z TST DCC Release document 5 F. PCB FOOTPRINT: G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 2. TAPE DIMENSION D3 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7