Series 116 BFZ-SFZ www.vishay.com Vishay Sfernice Precision Rotative Transducers 360° Special Laws: Sine/Cosine FEATURES • Laws: sine and cosine • Size 11 RoHS • Continuous measure on 360° COMPLIANT • Long life up to 25 106 cycles • Conformity from ± 1 % down to ± 0.5 % • Bushing or servo mounting • Following MIL-R-39023 requirements • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Rotational motion transducers with trigonometric laws for a full angle measurement: 360° (no dead band). SIZE MODEL QUICK REFERENCE DATA Sensor type Output type Market appliance 116 SFZ LAW ROTATIONAL, conductive plastic Output by turrets Professional Dimensions 11 116 BFZ Z: Sine and cosine 1 1/16" (27 mm) ELECTRICAL SPECIFICATIONS Theoretical Electrical Angle (TEA) = 360° Actual electrical angle (AEA) = TEA A±1% Conformity Peak to Peak Number of Cups or B ± 0.5 % Up to 2 Ohmic Values (RT per quadrant) 1 k - 5 k - 10 k - on request other values Ohmic Value Tolerances at 20 °C ± 20 % 0.05 % Output Smoothness Maximum Power Rating at 70 °C 0.4 W Wiper Current Recommended: a few μA - 1 mA max. (continuous) Ground Taps On request Minimum 103 x RT Resistance Load on Wiper Resolution Essentially infinite 1000 M, 500 VDC Insulation Resistance 500 VRMS, 50 Hz Dielectric Strength MECHANICAL SPECIFICATIONS Mechanical Angle (MA) 360° continuous Mounting Type Servo Bushing Shaft Guiding Ball bearings Sleeve bearings Shaft Stainless steel Housing Plastic molding Termination Turrets Wiper Starting Torque (N.cm) Weight (g) Revision: 26-Mar-15 Precious metal multi-finger contact 1 cup 0.3 2 cups 0.5 0.5 0.8 30 ± 2 (1 cup) + 17 ± 2 (2 cups) Document Number: 54006 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Series 116 BFZ-SFZ www.vishay.com Vishay Sfernice PERFORMANCE 25 (servo) Life (106 cycles) Temperature Range Climatic Category Speed Rotation (RPM) Sine Vibration on 3 Axes Mechanical Shocks on 3 Axes 15 (bushing) -55 °C to +125 °C 55/125/04 600 (servo) 150 (bushing) 1.5 mm or 20 g from 10 Hz to 2000 Hz 50 g - 11 ms - half sine Note • Nothing stated herein shall be construed as a guarantee of quality or durability. TRIGONOMETRIC FUNCTIONS SINE/COSINE OVER 360° +E LAW Z 90° θ 0 SIN COS ec -E -E es ∝ β +E a=0 ec = SIN ∝ E E = COS β 0° ≤ Θ ≤ 360° es β = ∝ + 90° DIMENSIONS in millimeters, general tolerance ± 0.5 mm 116 SF Z 3 1.6 ± 0.1 116 BF Z SIZE 11 F E 2 4 A A C 5 6 G D B 1 1.6 J C K H R = I MAX. 1: 2: 3: 4: 5: 6: Ø 9.52 × 0.78 45° 45° H N B N POWER SUPPLY (+) POWER SUPPLY (-) WIPER (SINE) WIPER (COSINE) GROUND TAP (ON REQUEST) GROUND TAP (ON REQUEST) DIMENSIONS mm DESIGNATION 116 SF Z A +0 - 0.013 3.175 116 BF Z C max. D +0 - 0.013 E ± 0.1 F min. G max. H min. I max. 16.6 27.05 24.608 1.6 1.5 24.8 4.5 17.3 - - 18.5 35 20 27.05 - - - - 3 - 10.3 9.6 16.5 33 B max. J +0 - 0.02 K max. N max. N max. (1 cup) (2 cups) ORDERING INFORMATION/DESCRIPTION ROT 116 S F Z 1 A 502 e1 SERIES MODEL MOUNTING TYPE CONDUCTOR LAW NUMBER OF CUPS CONFORMITY OHMIC VALUE LEAD FINISH S: Servo B: Bushing F: Plastic Z: Sine/ cosine 2 max. A: ± 1 % B: ± 0.5 % First 2 digits are significant numbers 3rd digit indicates number of zeros Note • Special characteristics and designs on request SAP PART NUMBERING GUIDELINES RO 116SFZ 1 B 103 MODEL GANG NUMBER CONFORMITY OHMIC VALUE 1 or 2 A or B 10 k Revision: 26-Mar-15 Document Number: 54006 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000