UNISONIC TECHNOLOGIES CO., LTD SD106WS SCHOTTKY DIODE SCHOTTKY DIODES 1 2 FEATURES SOD-123 * Low turn-on Voltage VD * Built –in PN Junction Guard Ring 1 2 SOD-323 ORDERING INFORMATION Order Number SD106WSG-CA2-R SD106WSG-CB2-R Note: Pin Assignment: A: Anode K: Cathode Package SOD-123 SOD-323 Pin Assignment 1 2 A K A K Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-010.C SD106WS SCHOTTKY DIODE ABSOLUTE MAXIMUM RATINGS (Single Diode @ TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Maximum non-repetitive Peak Reverse Voltage VRM 30 V Peak Forward Current IFM 200 mA Non-repetitive Peak Forward Surge Current @ tp=10ms IFSM 1 A Power Dissipation PD 250 mW Junction Temperature TJ 150 °C Storage Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Thermal Resistance Junction to Ambient SYMBOL θJA RATINGS 500 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER Forward Voltage Reverse Breakdown Voltage Peak Reverse Leakage Current Typical Junction Capacitance SYMBOL VF BVR IR CT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw CONDITIONS IF=2mA IF=15mA IF=100mA IF=200mA IR=100μA VR=30V VR=10V, f=1MHz MIN 30 TYP MAX UNIT 260 mV 320 mV 420 mV 490 550 mV V 5 μA 15 pF 2 of 3 QW-R601-010.C SD106WS SCHOTTKY DIODE TYPICAL CHARACTERISTICS Reverse Characteristics Forward Characteristics 10000 1000 100 IR (μA) IF(mA) 10 TJ = 25 1 TJ = -40 0.1 0.01 0 0.1 TJ = 125 1000 TJ = 125 0.2 0.3 TJ = 100 100 10 TJ = 75 TJ = 50 1 0.4 0.5 VF (V) 0.6 0.7 0.8 0.1 TJ = 25 0 5 10 15 20 25 30 VR (V) Capacitance CIN vs. Reverse Voltage VR CT (pF) 50 10 1 0 5 10 15 VR (V) 20 25 30 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-010.C