Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74LVC2G06
CMOS IC
INVERTERS WITH OPEN-DRAIN
OUTPUTS
„
DESCRIPTION
The U74LVC2G06 is a dual inverting gate CMOS with open drain
output and provides the Boolean function Y= A in positive logic
device.
This device has a power-down protective circuit to prevent the
device from destruction when it is powered down.
„
FEATURES
* Operate From 1.65V to 5.5V
* Inputs Accept Voltages to 5.5V
* High Noise Immunity
* Low Power Dissipation
* Direct Interface with TTL Level
„
ORDERING INFORMATION
Ordering Number
U74LVC2G06G-AL6-R
„
Package
SOT-363
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2010 Unisonic Technologies Co., Ltd
1 of 5
QW-R502-396.A
U74LVC2G06
CMOS IC
„
PIN CONFIGURATION
„
FUNCTION TABLE
INPUT(nA)
OUTPUT(nY)
H
L
L
Z
Note: H: HIGH voltage level; L: LOW voltage level; Z: High impedance OFF-state.
LOGIC DIAGRAM (positive logic)
„
1A
1Y
2A
2Y
1A
1Y
2A
2Y
Logic symbol
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
IEC logic symbol
2 of 5
QW-R502-396.A
U74LVC2G06
„
CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
VCC
VIN
RATINGS
UNIT
-0.5 ~ +6.5
V
-0.5 ~ +6.5
V
Active mode
-0.5 ~ +6.5
V
Output Voltage
VOUT
Power-down mode
-0.5 ~ +6.5
V
VCC or GND Current
ICC
±100
mA
Continuous Output Current (VOUT=0 to VCC)
IOUT
±50
mA
Input Clamp Current (VIN<0)
IIK
-50
mA
Output Clamp Current (VOUT>VCC or VOUT<0)
IOK
±50
mA
Power Dissipation (TA=-40°C ~ +125°C)
PD
300
mW
Storage Temperature Range
TSTG
-65 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
Supply Voltage
Input Voltage
„
RECOMMENDED OPERATING CONDITIONS
PARAMETER
Supply Voltage
Input Voltage
SYMBOL
VCC
VIN
Output Voltage
VOUT
Operating Temperature
Active mode
Power-down mode
TA
Input Transition Rise or Fall Rate
„
TEST CONDITIONS
tR / t F
VCC=1.65V to 2.7V
VCC=2.7V to 5.5V
MIN
1.65
0
0
0
-40
0
0
TYP
MAX
5.5
5.5
VCC
5.5
125
20
10
UNIT
V
V
V
V
°C
ns/V
ns/V
TYP
MAX
±0.1
±0.1
0.1
0.45
0.3
0.4
0.55
0.55
±5
±10
UNIT
V
V
V
V
V
V
V
V
V
V
V
V
V
V
μA
μA
±0.1
±10
μA
0.1
10
μA
5
500
μA
ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified)
PARAMETER
High-Level Input Voltage
Low-Level Input Voltage
Low-Level Output Voltage
Input Leakage Current
Power OFF Leakage Current
3-state Output OFF-state
Current
Quiescent Supply Current
Additional Quiescent Supply
Current Per Input Pin
SYMBOL
VIH
VIL
VOL
II(LEAK)
IOFF
IOZ
IQ
ΔICC
TEST CONDITIONS
VCC=1.65V ~ 1.95V
VCC=2.3V ~ 2.7V
VCC=2.7V ~ 3.6V
VCC=4.5V ~ 5.5V
VCC=1.65V ~ 1.95V
VCC=2.3V ~ 2.7V
VCC=2.7V ~ 3.6V
VCC=4.5V ~ 5.5V
IOL=100μA
VCC=1.65 ~ 5.5V
IOL=4mA
VCC=1.65V
IOL=8mA
VCC=2.3V
IOL=12mA
VCC=2.7V
IOL=24mA
VCC=3.0V
VCC=4.5V
IOL=32mA
VIN=5.5V or GND, VCC=5.5V
VIN or VOUT=5.5V, VCC=0V
VIN= VIH or VIL, VOUT=VCC or GND,
VCC=5.5V
VIN=VCC or GND, IOUT=0
VCC=5.5V
VCC=2.3 ~ 5.5V, One input at VCC-0.6V,
Other inputs at VCC or GND
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
0.65*VCC
1.7
2
0.7*VCC
0.35*VCC
0.7
0.8
0.3*VCC
3 of 5
QW-R502-396.A
U74LVC2G06
„
CMOS IC
SWITCHING CHARACTERISTICS (TA=25°С)
PARAMETER
SYMBOL
Propagation delay from input
(A) to output(Y)
tPLZ / tPZL
TEST CONDITIONS
VCC=1.8±0.15V, RL=1KΩ
CL=30pF
VCC=2.5±0.2V, RL=500Ω
VCC=2.7V
RL=500Ω,
VCC=3.3±0.3V
CL=50pF
VCC=5±0.5V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
1.0
0.5
1.0
0.5
0.5
TYP
3.2
2.0
2.6
2.3
1.6
MAX
6.5
3.9
4.2
3.4
2.9
UNIT
ns
ns
ns
ns
ns
4 of 5
QW-R502-396.A
U74LVC2G06
„
CMOS IC
TEST CIRCUIT AND WAVEFORMS
VLOAD
From Output
RL
CL
RL
Inputs
VCC
1.8V±0.15V
2.5V±0.2V
2.7V
3.3V±0.3V
5V±0.5V
VIN
VCC
tR, tF
≤2ns
VCC
2.7V
2.7V
VCC
≤2ns
≤2.5ns
≤2.5ns
≤2.5ns
VM
VLOAD
VΔ
CL
RL
VCC/2
VCC/2
1.5V
1.5V
VCC/2
2 x VCC
2 x VCC
6V
6V
2 x VCC
0.15V
0.15V
0.3V
0.3V
0.3V
30pF
30pF
50pF
50pF
50pF
1KΩ
500Ω
500Ω
500Ω
500Ω
Note: CL includes probe and jig capacitance.
All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, Zo = 50Ω.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R502-396.A