MLV2220E3 Datasheet

MLV2220E3
www.vishay.com
Vishay BCcomponents
SMD 2220 Multilayer Varistor
FEATURES
• Surface mount multilayer surge suppressor
• Inherent bidirectional clamping
• Excellent energy/volume ratio
• Suitable for reflow soldering
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Over-voltage and transient voltage protection:
• Data lines and I/O port protection
• Protection against ESD transients
• On-board protection of IC’s and transistors
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
• Modem protection
• LCD protection
Maximum continuous voltage
DC
5.6 to 85.0
V
DESCRIPTION
AC
4.0 to 60.0
V
Maximum clamping voltage
at 10 A
19.0 to 165
V
Size 2220 (M5750) multilayer chip varistor with NiSn
terminations.
Capacitance range
(at 1 kHz)
800 to 20 000
pF
PACKAGING
Maximum energy 
(10/1000 μs)
1.4 to 12
J
800 to 1200
A
-55 to 85
°C
± 0.240
g
Maximum peak current 
(8/20 μs)
Operating temperature range
Weight
Available in 12 mm embossed carrier tape, component pitch
8 mm on 180 mm reels containing 1000 pieces.
ELECTRICAL DATA AND ORDERING INFORMATION
WORKING VOLTAGE
BREAKDOWN
VOLTAGE
CLAMPING
VOLTAGE
MAX. PEAK
CURRENT
MAXIMUM
ENERGY
CAPACITANCE PART NUMBER
VRMS
VDC
Vb
VC
Ip
Et
C
SAP
V
V
V
V
A
J
pF
MLV2220E3
< 50 μA
1 mA
10 A, 8/20 μs
8/20 μs
10/1000 μs
1 kHz
4.0
5.6
7.0 to 10.0
19.0
1200
1.4
20 000
0403T
14.0
18.0
22.0 to 27.0
52.0
1200
5.8
15 000
1403T
25.0
30.0
37.0 to 46.0
68.0
1200
9.6
5000
2503T
30.0
38.0
42.3 to 51.7
77.0
1200
12.0
4000
3003T
50.0
65.0
73.8 to 90.2
135.0
800
5.6
1000
5003T
60.0
85.0
90.0 to 110.0
165.0
800
6.8
800
6003T
Notes
• Sinusoidal voltage assumed as normal operating condition.
If a non-sinusoidal voltage is present, the crest voltage x 0.707 should be used for type selection.
• Breakdown voltage at a current of 1 mA, measured according to 4.5 of IEC 61051-1.
• Parts are not recommended for automotive applications.
Revision: 30-Apr-15
Document Number: 29129
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MLV2220E3
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters
T
W
L2
L4
L1
L3
L1
W
T
L2 and L3
5.7 ± 0.4
5.0 ± 0.5
2.5 max.
0.8 max.
RECOMMENDED FOOTPRINT in millimeters
C
A
B
A
B
C
5.2
1.2
6.4
V/I CHARACTERISTICS
max. leakage current
max. clamping voltage
060
050
030
025
014
100
VOLTAGE (V)
004
10
1
0.00001
0.0001
0.001
0.01
0.1
1
10
100
1000
CURRENT (A)
Revision: 30-Apr-15
Document Number: 29129
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MLV2220E3
www.vishay.com
Vishay BCcomponents
PULSE DERATING 4 VRMS TO 30 VRMS
1 pulse
1000
Ipulse max. (A)
2
10
102
103
104
100
105
106
10
1
10
100
tpulse
1000
10 000
1000
10 000
(μs)
PULSE DERATING 50 VRMS TO 60 VRMS
1000
1 pulse
2
10
102
103
104
105
106
Ipulse max. (A)
100
10
1
10
100
tpulse
Revision: 30-Apr-15
(μs)
Document Number: 29129
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000