NEW! 6 kV Isolators ® IsoLoop Isolation Products Short-Form Catalog Digital Isolators and Transceivers IL800T-Series Top-of-the-Line Isolators Best Speed, Temperature, and Performance IN1 VOE IN1 OUT1 OUT1 IN2 OUT2 OUT3 IL810 VOE IN1 OUT1 IN2 OUT2 IL811 OUT1 IN1 IN2 IN3 OUT2 IL814 IN1 VOE OUT1 IN2 OUT2 IN3 OUT3 IN4 OUT4 New IL800T-Series Digital Isolators are best-in-class for speed, temperature, and other performance parameters. Popular applications include serial interfaces, isolated SPI, and isolated A/D converters. Features: • 100 Mbps • 125°C • DC-correct • Excellent magnetic immunity • VDE V 0884-10 certified and UL 1577 recognized • Working Voltage (VIORM) 600 VRMS per VDE V 0884-10 • True 8 mm creepage wide-body packages per IEC 60601 IL815 IL821 IN1 OUT1 IN2 OUT2 OUT3 IN3 OUT4 IN4 IL816 IN1 OUT1 IN2 OUT2 IN3 OUT3 OUT4 IN4 IL817 Parameter Data Rate PWD Propagation Delay Propagation Delay Skew Pulse Jitter Quiescent Supply Current Transient Immunity Isolation Voltage Operating Temperature Min. 100 30 2.5 –40 Typ. 110 10 4 100 1.3 50 Max. 3 15 6 1.8 +125 Units Mbps ns ns ns ps mA/ch kV/μs kVRMS °C IL700/IL200 Series High-Performance Isolators Versatile Workhorse Isolators IN1 VOE IN1 OUT1 OUT1 IN2 OUT2 IL710 IN1 OUT1 IN2 OUT2 OUT3 IN3 OUT4 IN4 IL716 High-voltage V-Series versions have extremely high isolation voltages of 6 kVRMS in wide-body packages and 2.5 kVRMS in MSOPs. Wide-body V-Series versions are rated at a remarkable 1000 VRMS Working Voltage and 12.8 kV surge immunity. IL711 IN1 OUT2 OUT1 IN1 OUT1 IN2 IN2 OUT2 IN3 OUT3 IL712 OUT4 OUT1 IN1 IN2 Award-winning IL700/ NEW! IL200-Series Digital 6 kV Isolators provide Isolators performance and flexibility, including highest data rates, smallest packages, lowest distortion, low power consumption, and 44000-year barrier life. IN4 IL717 OUT2 IL721 Popular IL700/IL200 applications include serial interfaces, isolated SPI, and switch-mode power supplies. Features: • No carrier or clock for low emissions and high immunity • Excellent magnetic immunity • World’s smallest isolators available (MSOP8 and QSOP16) • Highest isolation voltage (6 kVRMS) • Fastest (to 150 Mbps) and lowest PWD (300 ps) • VDE V 0884-10 certified; UL 1577 recognized • True 8 mm creepage wide-body packages per IEC 60601 IN1 OUT1 IN1 OUT1 IN1 OUT1 IN1 OUT1 IN2 OUT2 IN2 OUT2 IN2 OUT2 IN2 OUT2 IN3 OUT3 IN3 OUT3 IN3 OUT3 IN3 OUT3 IN4 OUT4 IN4 OUT4 IN4 OUT4 OUT4 IN4 IN5 OUT5 OUT5 IN5 OUT5 IN5 IL715 IL260 IL262 IL261 Parameter Min. Data Rate (Std./S-Series) 100 / 130 PWD (Std./S-Series) Propagation Delay Skew Pulse Jitter Quiescent Supply Current Isolation (Standard/VE-Series) 2.5 / 6 Transient Immunity 30 Op. Temp. (Std./T or VE-Series) –40 IL200 Series Typ. 110 / 150 3 / 0.3 4 100 1.2 Max. 3 6 1.75 50 +100 / +125 +85 Units Mbps ns ns ps mA/ch kVRMS kV/μs °C IL400, IL3000, and IL41050 Series Single-Chip Isolated Network Transceivers NEW! 6 kV NVE offers a broad range of isolated RS-422, RS-485 and CAN network transceivers. All have excellent EMC footprints, 50 kV/μs typical transient immunity, and virtually unlimited barrier life. NEW! QSOPs High-voltage V-Series versions have 6 kVRMS isolation voltage. Standard isolation voltage is 2.5 kVRMS. Standard versions are rated for 600 VRMS Working Voltage per VDE V 0884-10; V-Series versions for 1000 VRMS Working Voltage. S VCOIL1 VCOIL1 Y Z D VCOIL2 A B R RE RxD Model IL41050TT IL41050TA IL3122 IL3185 IL3222 IL3285 IL3422 IL3485 IL422 IL485 IL485W IL3085 IL3522 IL3585 IL3685 Bus CAN CAN RS-422 RS-485 RS-422 RS-485 RS-422 RS-485 RS-422 RS-485 RS-485 RS-485 RS-422 RS-485 RS-485 Inputs Digital Digital Passive Passive Passive Passive Passive Passive Digital Digital Digital Digital Digital Digital Digital CANL VREF A B R IL485 / IL3085 / IL3585 / IL3685 ISODE D D VCOIL2 A B IL3185 / IL3285 / IL3485 Mbps 1 1 5 5 5 5 20 20 25 35 35 4 40 40 40 ISODE RE IL41050TA RE IL3122 / IL3222 / IL3422 DE D DE R CANL CANH TxD All transceivers are VDE V 0884-10 certified and UL 1577 recognized; IL41050 models are ISO 11898 compliant; the IL3685 is PROFIBUS compliant. DE RxD IL41050TT Versions are available in unique 0.15-inch SOIC and QSOP packages, as well as true 8 mm creepage 0.3-inch SOICs, making these the most compact solutions in the world while still meeting isolation voltage creepage and clearance safety standards. DE CANH TxD Nodes Bus ESD 110 4 kV 110 4 kV 32 15 kV 32 15 kV 256 15 kV 256 15 kV 32 15 kV 32 15 kV 32 15 kV 32 2 kV 32 2 kV 32 15 kV 50 15 kV 50 15 kV 50 15 kV A B R RE IN1 OUT1 IL485W Key Features Low Cost 125C; Silent Mode Low Cost Low Cost Fractional Load Fractional Load High Speed High Speed Legacy Standard Legacy Standard Handshake Line Low Cost Very High Speed Very High Speed PROFIBUS DE ISODE D Y Z R A B RE IL422 / IL3522 Available Packages 0.3" SOIC16 0.15" SOIC16; 0.3" SOIC16; QSOP16 0.15" SOIC16; 0.3" SOIC16 0.15" SOIC16; 0.3" SOIC16 0.15" SOIC16; 0.3" SOIC16 0.15" SOIC16; 0.3" SOIC16 0.15" SOIC16; 0.3" SOIC16 0.15" SOIC16; 0.3" SOIC16 0.3" SOIC16 0.3" SOIC16 0.3" SOIC16 0.15" SOIC16; 0.3" SOIC16; QSOP16 0.3" SOIC16 0.15" SOIC16; 0.3" SOIC16 0.15" SOIC16; 0.3" SOIC16 IL500 Series 2 Mbps Isolators The Cost-Effective Alternative VOE IN1 OUT1 Popular IL500-Series applications include isolated A/D and D/A converters, serial interfaces, isolated SPI, and power interfaces. IL510 IN1 OUT1 IN2 OUT2 IL511 OUT1 IN1 IN2 IL500-Series Isolators are NVE’s lowest-cost isolators. One, two, three, or four channel configurations; SOIC or unique MSOP packages. An internal refresh clock ensures DC-correct operation. OUT2 Features: • 2 Mbps • 10 ns pulse-width distortion • DC correct • Working Voltage 600 VRMS per VDE V 0884-10 • –40°C to +85°C operating range • 44000-year barrier life • MSOP and SOIC packages IL521 IN1 OUT1 IN2 OUT2 OUT3 IN3 VOE IL514 VOE IN1 OUT1 IN2 OUT2 IN3 OUT3 IN4 OUT4 IL515 IN1 OUT1 IN2 OUT2 OUT3 IN3 OUT4 IN4 IL516 Parameter Data Rate Pulse Width Distortion Propagation Delay Propagation Delay Skew Transient Immunity Temperature Range Min. 2 Typ. Max. 10 25 10 30 –40 50 +85 Units Mbps ns ns ns kV/μs °C IL600 and IL600A Passive Input Isolators The Opto Alternative SM Unique IL600 and IL600A Series Isolators have passive inputs for flexibility similar to LED-input optocouplers. The IL600Series has CMOS outputs and the IL600A-Series has opendrain outputs. VOE VOE OUT1 IN1 IL610 IL610A Unlike other isolators, the IL600/IL600A Series can be configured for inverting or non-inverting inputs. OUT1 IN1 The IL600 and IL600A-Series Isolators are available in PDIP, SOIC, and unique MSOP packages. Parts are also available as bare die for chip-on-board assembly. Popular IL600/IL600A Series applications include isolated PLCs, serial interface receivers, I²C, isolated CAN Bus, and wired-OR controls. Features: • Failsafe operation • DC correct • 5 mA input current • No carrier or clock for low EMI emissions and susceptibility • 3.3 V or 5 V supply • 2.5 mA dynamic input current (50% duty cycle) • VDE V 0884-10 certified; UL 1577 recognized • 44000-year barrier life • PDIP, SOIC, MSOP, or bare die OUT1 IN1 GND OUT2 IN2 IN1 OUT1 IN2 OUT2 GND IL611A IL611 VDD1 IN1 OUT2 VDD1 OUT1 VDD2 GND IN2 GND OUT1 IN1 VDD2 OUT2 IL612A IN2 IL612 IN1 OUT1 IN2 OUT2 IN3 OUT3 IL613 OUT1 IN1 RE IN2 OUT2 COIL OUT3 IN3 IL614 Parameter Data Rate (Standard / A-Series) Pulse Width Distortion Propagation Delay Propagation Delay Skew Transient Immunity Temperature Range Min. 100 / 10 15 –40 Typ. Max. 3 8 4 20 5 15 6 +85 Units Mbps ns ns ns kV/μs °C Illustrative Applications VIN Isolation Barrier VOUT Voltage Reference PWM Controller Error Amplifier IL711V-1 Voltage-toFrequency Convertor One-Shot IL710V-1 Switch-Mode Power Supply With 2.5 kV MSOP Isolators V-1 Series MSOP isolators can be used for both can synchronous rectification and voltage feedback isolation to shrink Switch Mode Power Supplies. Using the IL710V-1 for voltage feedback instead of a linear optocoupler eliminates a major reliability problem. Sampling ADC ADS7825 Analog Ch 0 Multi-Channel Isolated Sampling A/D Converter Using IL261 The IL261 is ideal for isolating multi-channel sampling ADCs. Isolated channels A0 and A1 control the analog channel being sampled, while the three remaining I/O lines on the IL261 isolate the SPI interface. Analog Ch 1 Analog Ch 2 Isolation Boundary Analog Ch 3 Serial Data Out Iso SD Out R/C Iso Read/Conv Data Clock Iso Data Clock Channel A0 Iso Ch A0 Channel A1 Iso Ch A1 IL261 Visit www.nve.com for more IsoLoop Isolator circuits. Limited Warranty and Liability Information in this document is believed to be accurate and reliable. However, NVE does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NVE be liable for any indirect, incidental, punitive, special or consequential damages (including, without limitation, lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Right to Make Changes NVE reserves the right to make changes to information published in this document including, without limitation, specifications and product descriptions at any time and without notice. This document supersedes and replaces all information supplied prior to its publication. Use in Life-Critical or Safety-Critical Applications Unless NVE and a customer explicitly agree otherwise in writing, NVE products are not designed, authorized or warranted to be suitable for use in life support, lifecritical or safety-critical devices or equipment. NVE accepts no liability for inclusion or use of NVE products in such applications and such inclusion or use is at the customer’s own risk. Should the customer use NVE products for such application whether authorized by NVE or not, the customer shall indemnify and hold NVE harmless against all claims and damages. Applications Applications described in this document are illustrative only. NVE makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NVE products, and NVE accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NVE product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customers. Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NVE does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customers. The customer is responsible for all necessary testing for the customer’s applications and products using NVE products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customers. NVE accepts no liability in this respect. Terms and Conditions of Sale In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NVE hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NVE products by customer. No Offer to Sell or License Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export Control This document as well as the items described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Automotive Qualified Products Unless the datasheet expressly states that a specific NVE product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NVE accepts no liability for inclusion or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NVE’s warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NVE’s specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NVE for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NVE’s standard warranty and NVE’s product specifications. An ISO 9001 Certified Company NVE Corporation 11409 Valley View Road Eden Prairie, MN 55344-3617 USA (952) 829-9217 www.nve.com [email protected] On the Cover IsoLoop Isolation Products help make a digital world practical. Approximately 750 actual-size IsoLoop 8-pin MSOP Isolators form the image on the front and back spine of this catalog. NVE is the leader in isolator miniaturization with a full line of MSOP, QSOP, and narrow-body parts. ©NVE Corporation All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. ISB-CB-002-01-U January 2016