Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MBR10200C
DIODE
SCHOTTKY BARRIER
RECTIFIER

FEATURES
* 10 amps total (5 amps per diode leg)
* Guard ring for transient protection
* Low forward voltage drop
* High surge capability
* Low power loss/High efficiency

SYMBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MBR10200CL-TA3-T
MBR10200CG-TA3-T
MBR10200CL-TF3-T
MBR10200CG-TF3-T
MBR10200CL-TF1-T
MBR10200CG-TF1-T
MBR10200CL-TQ2-T
MBR10200CG-TQ2-T
MBR10200CL-TQ2-R
MBR10200CG-TQ2-R
Note: Pin Assignment: A: Anode
K: Cathode
MBR10200CL-TA3-T
TO-220
TO-220F
TO-220F1
TO-263
TO-263
Pin Assignment
1
2
3
A
K
A
A
K
A
A
K
A
A
K
A
A
K
A
Packing
Tube
Tube
Tube
Tube
Tape Reel
(1) T: Tube, R: Tape Reel
(1)Packing Type
(2)Package Type
(3)Green Package

Package
(2) TA3: TO-220, TF3: TO-220F, TF1: TO-220F1
TQ2: TO-263
(3) L: Lead Free, G: Halogen Free and Lead Free
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R601-185.D
MBR10200C

DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
PARAMETER
Maximum Repetitive Peak Reverse Voltage
Maximum non-repetitive Peak Reverse Voltage
Maximum DC Blocking Voltage
Average Forward Rectified Output Per Leg
Current
Total
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half-Sine-Wave
Junction Capacitance (Note 4)
Operating Temperature
Storage Temperature

RATINGS
200
200
200
5
10
UNIT
V
V
V
A
A
IFSM
150
A
CJ
TJ
TSTG
300
-65 ~ +150
-65 ~ +150
pF
°C
°C
IO
THERMAL DATA
PARAMETER
SYMBOL
θJA
Junction to Ambient
Junction to Case

SYMBOL
VRRM
VRM
VR
TO-220/TO-263
TO-220F/TO-220F1
θJC
RATINGS
60
2
4
UNIT
°С/W
°С/W
°С/W
ELECTRICAL CHARACTERISTICS (Note 3)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
IF=5A, TC=25°C
0.95
V
IF=5A, TC=125°C
0.85
V
Instantaneous Forward Voltage Drop
VF
IF=10A, TC=25°C
1
V
IF=10A, TC=125°C
0.95
V
Rated DC Voltage, TC=25°C
500 μA
Instantaneous Reverse Current
IR
Rated DC Voltage, TC=125°C
20
mA
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. 2.0μs Pulse Width, f = 1.0KHz.
3. Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%.
4. Applied VR = 4.0V and f = 1.0MHz.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R601-185.D
MBR10200C
DIODE
TYPICAL CHARACTERISTICS

Typical Forward Characteristics
Forward Derating Curve
100
Instantaneous Forward Current (A)
Average Rectified Current (A)
7
6
5
4
3
2
1
0
0
25
50
75
100
125 150
175
Case Temperature (°C)
25°C
10
1.0
IF Pulse
Width=300uS
0.1
0.4
0.6
0.8
1.2
1.0
Instantaneous Forward Voltage (V)
Typical Reverse Characteristics
Instantaneous Reverse Current (A)
1E-2
1E-3
1E-4
1E-5
1E-6
1E-7
1E-8
VR=200V
25
50
75
100
125
150
Case Temperature (°C)
UTC assum es no responsibility for equipm ent failures that result from using products at v alues that
exceed, ev en m om entarily, rated v alues (such as m axim um ratings, operating condition ranges, or
other param eters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or system s where
m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation
presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate
and reliable and m ay be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R601-185.D
Similar pages
509