Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MBR10100C
DIODE
SCHOTTKY BARRIER
RECTIFIER

FEATURES
* 10 amps total (5 amps per diode leg)
* Guard ring for transient protection
* Low forward voltage drop
* High surge capability
* Low power loss/High efficiency

SYMBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MBR10100CL-TA3-T
MBR10100CG-TA3-T
MBR10100CL-TF1-T
MBR10100CG-TF1-T
MBR10100CL-TF2-T
MBR10100CG-TF2-T
MBR10100CL-TF3-T
MBR10100CG-TF3-T
MBR10100CL-TN3-R
MBR10100CG-TN3-R
MBR10100CL-TND-R
MBR10100CG-TND-R
MBR10100CL-TQ2-T
MBR10100CG-TQ2-T
MBR10100CL-TQ2-R
MBR10100CG-TQ2-R
Note: Pin Assignment: A: Anode
K: Cathode

Package
TO-220
TO-220F1
TO-220F2
TO-220F
TO-252
TO-252D
TO-263
TO-263
Pin Assignment
1
2
3
A
K
A
A
K
A
A
K
A
A
K
A
A
K
A
A
K
A
A
K
A
A
K
A
Packing
Tube
Tube
Tube
Tube
Tape Reel
Tape Reel
Tube
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 3
QW-R601-015.G
MBR10100C

DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
PARAMETER
Maximum Repetitive Peak Reverse Voltage
Maximum non-repetitive Peak Reverse Voltage
Maximum DC Blocking Voltage
Per Leg
Average Forward Rectified Output Current
Total
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half-Sine-Wave
Junction Capacitance (Note 4)
Operating Temperature
Storage Temperature

RATINGS
100
100
100
5
10
UNIT
V
V
V
A
A
IFSM
120
A
CJ
TJ
TSTG
300
-55 ~ +150
-55 ~ +150
pF
°C
°C
SYMBOL
RATINGS
UNIT
IO
THERMAL DATA
PARAMETER
Junction to Ambient
Junction to Case

SYMBOL
VRRM
VRM
VR
TO-220/TO-220F
TO-220F1/TO-220F2
TO-263
TO-252/TO-252D
TO-220/TO-263
TO-220F/TO-220F1
TO-220F2
TO-252/TO-252D
θJA
60
100
2
θJC
4
°С/W
°С/W
°С/W
2.5
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
IF=5A, TC=25°C
0.85
V
IF=5A, TC=125°C
0.80
V
Instantaneous Forward Voltage Drop (Note 3)
VFM
IF=10A, TC=25°C
0.95
V
0.90
V
IF=10A, TC=125°C
Rated DC Voltage, TC=25°C
100 μA
Instantaneous Reverse Current (Note 3)
IRM
15
mA
Rated DC Voltage, TC=125°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. 2.0μs Pulse Width, f = 1.0 KHz.
3. Pulse Test: Pulse Width=300µs, Duty Cycte ≤ 2.0 %
4. Applied VR = 4.0V and f = 1.0 MHz.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R601-015.G
MBR10100C

DIODE
TYPICAL CHARACTERISTICS
UTC assum es no responsibility for equipm ent failures that result from using products at v alues that
exceed, ev en m om entarily, rated v alues (such as m axim um ratings, operating condition ranges, or
other param eters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or system s where
m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation
presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate
and reliable and m ay be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R601-015.G
Similar pages