PCS and WLAN Omni Antennas
ANCC-15x Series
V4.00
Features
●
●
●
●
●
●
Light Weight - Slim Profile
Patented Printed Circuit Technology
Watertight Ultrasonic and O-Ring Sealed
Groundplane Independent
Stainless Steel Hardware
Multiple pigtail lengths, radome colors and connector
options available
Description
M/A-COM’s Omni antennas are vertically polarized
collinear arrays utilizing a patented printed circuit
technology for the radiating elements. These rugged
antennas are housed in UV stable ultrasonically
bonded polycarbonate radomes. Installation is easy due
to the small footprint, mounting system, and our
convenient pigtail connection. Our Omni antennas are
groundplane independent and can be mounted in any
direction. Mounting bracket included.
Specifications
Part No: ANCCFrequency (MHz)
Peak Gain (dBi)
Beamwidth - 3dB
Polarization - Linear
Nominal Impedance
VSWR
RF Power - Average
Weight
Length ± 0.125 in.
Diameter ± 0.015 in.
Temperature
Pigtail (RG - 58/U)
Color
151A
1850-1990
4.2 Typical
40°
Vertical
50 Ohm
2.0:1 Max
50 W
3.9 oz
11.6
0.75
-40°C to +85°C
12” N-Male
Natural
152A
1850-1990
5.6 Typical
27°
Vertical
50 Ohm
2.0:1 Max
50 W
4.3 oz.
15.35
0.75
-40°C to +85°C
12” N-Male
Natural
153A
1850-1990
6.7 Typical
22°
Vertical
50 Ohm
2.0:1 Max
50 W
4.7 oz.
19.35
0.75
-40°C to +85°C
12” N-Male
Natural
154A
2400-2500
4.5 Typical
40°
Vertical
50 Ohm
2.0:1 Max
50 W
3.5 oz
10.1
0.75
-40°C to +85°C
12” N-Male
Natural
155A
2400-2500
6.0 Typical
27°
Vertical
50 Ohm
2.0:1 Max
50 W
3.9 oz
12.6
0.75
-40°C to +85°C
12” N-Male
Natural
156A
2400-2500
7.0 Typical
22°
Vertical
50 Ohm
2.0:1 Max
50 W
4.3 oz
15.6
0.75
-40°C to +85°C
12” N-Male
Natural
How to Order: Select the appropriate option from the table above, and add “-S-12-NM” to the part number. For example, to order a 6.7 dBi antenna for use at 1920 MHz, the part number will be ANCC-153A-S-12-NM.
Specifications Subject to Change Without Notice.
M/A-COM, Inc.
North America:
Tel. (800) 366-2266
Fax (800) 618-8883
■
Asia/Pacific: Tel. +85 2 2111 8088
Fax +85 2 2111 8087
■
Europe: Tel. +44 (1344) 869 595
Fax +44 (1344) 300 020
PCS and WLAN Omni Antennas
ANCC-15x Series
V4.00
Mounting Instructions:
ANCC-153A
The antenna should be mounted free and clear of all
surrounding structures. Mount the antenna and tighten
all hardware.
Performance Note:
The performance of the antenna is established by the
local electrical environment. The performance listed in
this datasheet was measured in free space without a
groundplane or reflective material present. The
suitability of this type of antenna should be established
through testing and actual configuration of use.
( 12.00 )
304.80
.437-32NS-2B
HEX NUT
.458
11.63
.650
16.51
' .515
13.08
'
.650
16.51
.230
5.84
OPTION A
.230
5.84
OPTION B
Required Mounting
(without bracket)
MIN MOUNTING PANE THICKNESS .06
MAX MOUNTING THICKNESS .33
19.35 –.10
491.49 –2.54
FLAT WASHER
'
CONNECTOR
N MALE
.563
14.30
.75 –.03
19.05 –.76
Dimensions shown in inches over millimeters.
INTERNAL TOOTH
LOCK WASHER
(' .201 )
5.11
THRU, 2 PL
( 1.50 )
38.1
( 2.25 )
57.15
( .38 )
9.65
( 1.25 )
31.75
MOUNTING BRACKET
Sample Elevation Plane Radiation Patterns
ANCC-151A at 1920 MHz
ANCC-153A at 1920 MHz
0
0
270
90
270
90
180
180
Azimuth Plane is omnidirectional within ± 1.5 dB.
Specifications Subject to Change Without Notice.
M/A-COM, Inc.
North America:
Tel. (800) 366-2266
Fax (800) 618-8883
■
Asia/Pacific:
Tel. +85 2 2111 8088
Fax +85 2 2111 8087
■
Europe: Tel. +44 (1344) 869 595
Fax +44 (1344) 300 020