LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED SMD Pb Lead-Free Parts LG-192WK-DT/T-P-1-C01 DATA SHEET DOC. NO : QW0905-LG-192WK-DT/T-P-1-C01 REV. : A DATE : 18 - Feb. - 2016 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/13 PART NO. LG-192WK-DT/T-P-1-C01 Features: 1. Package in 8.0mm carrier tape on 7" diameter reel. 2. Compatible with automatic placement equipment. 3. Compatible with reflow solder process. Descriptions: 1. The LG-192 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. 2. Besides, lightweight makes them ideal for miniature applications. etc. Applications: 1. Automotive : backlighting in dashboard and switch. 2. Telecommunication : indicator and backlighting in telephone and fax. 3. Flat backlight for LCD, switch and symbol 4. General use. Device Selection Guide: PART NO MATERIAL LG-192WK-DT/T-P-1-C01 InGaN COLOR Emitted Lens White Yellow Diffused LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/13 PART NO. LG-192WK-DT/T-P-1-C01 Package Dimensions Cathode Mark 0.4 0.2 0.8 Resin Cathode Mark 0.3 LED DIE 1.6 1.0 Soldering Terminal 1.0 0.6 0.3 PCB Note : 1.All dimension are in millimeter tolerance is ±0.1mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 0.8 0.8 0.7 0.8 Note : The tolerances unless mentioned is ±0.1mm,Angle ±0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/13 PART NO. LG-192WK-DT/T-P-1-C01 Absolute Maximum Ratings at Ta=25℃ Symbol Ratings UNIT Power Dissipation PD 31 mW Peak Forward Current Duty 1/10@10KHz IFP 100 mA Forward Current IF 10 mA Reverse Current @5V Ir 50 μA Electrostatic Discharge ESD 500 V Operating Temperature Topr -40 ~ + 85 ℃ Storage Temperature Tstg -40 ~ + 100 ℃ Parameter Typical Electrical & Optical Characteristics (Ta=25℃) Items Luminous Intensity Symbol Min. Typ. Max. UNIT Iv 65 ---- 120 mcd IF=5mA X 0.27 ---- 0.3 ---- IF=5mA Y 0.24 ---- 0.325 ---- IF=5mA VF 2.6 ---- 3.1 V IF=5mA 2θ 1/2 ---- 130 ---- deg IF=5mA Chromaticity Coordinates Forward Voltage Viewing Angle Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 3.The color coordinates measurememt allowance is ±0.01 testing tolerance. CONDITION LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/13 PART NO. LG-192WK-DT/T-P-1-C01 Luminous Intensity Classification BIN CODE Iv(mcd) at5mA Min. Max. A1 65 90 A2 90 120 Forward Voltage Classification BIN CODE Vf(v) at 5mA Min. Max. 1 2.6 2.7 2 2.7 2.8 3 2.8 2.9 4 2.9 3 5 3 3.1 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/13 PART NO. LG-192WK-DT/T-P-1-C01 Chromaticity Coordinates Specifications For Bin Grading Color Coordiante at 5mA BIN CODE 1 3 2 4 X Y X Y X Y X Y B2 0.27 0.28 0.27 0.24 0.28 0.255 0.28 0.295 B3 0.28 0.295 0.28 0.255 0.29 0.27 0.29 0.31 B4 0.29 0.31 0.29 0.27 0.3 0.285 0.3 0.325 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/13 PART NO. LG-192WK-DT/T-P-1-C01 CIE Chromaticity Diagram 0.35 0.33 0.31 B4 0.29 B3 0.27 B2 0.25 0.23 0.21 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/13 PART NO. LG-192WK-DT/T-P-1-C01 Typical Electro-Optical Characteristics Curve WK CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 100 Relative Intensity Normalize @5mA Forward Current(mA) 1000 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0.0 1.0 2.0 3.0 4.0 5.0 1 10 Forward Voltage(V) 100 1000 Forward Current(mA) Fig.3 Forward Current vs. Temperature Fig.4 Relative Intensity vs. Temperature Relative Intensity@5mA Normalize @25℃ Forward Current(mA) 40 30 20 10 0 0 20 40 60 80 100 100 Intensity 80 60 40 20 0 Wavelength (nm) 1.5 1.0 0.5 0.0 -20 0 20 40 60 Fig.6 Directive Radiation SPECTRAL RADIANCE 600 2.0 80 Ambient Temperature( ℃) Fig.5 Luminous Spectrum(Ta=25 ℃) 500 2.5 -40 Ambient Temperature (Ta°C) 400 3.0 700 800 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/13 PART NO. LG-192WK-DT/T-P-1-C01 Carrier Tape Dimensions 2.0 4.0 ±0.2 0.23 1.5 1.75 3.5±0.2 8.0 ±0.3 5.4 1.75 Polarity 0.6 4.0±0.2 0.9 Note : The tolerances unless mentioned is ± 0.1mm,Angle ± 0.5. Unit=mm. ‧ Packing Specifications Label Aluminum Moist-Proff bag Label Part No. Description Quantity/Reel LG-192WK-DT/T-P-1-C01 8.0mm tape,7"reel 4000 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 9/13 PART NO. LG-192WK-DT/T-P-1-C01 Label Explanation LIGITEK ELECTRONICS CO., LTD. Pb PART : BIN : Luminous Intensity LG-192WK-DT/T-P-1-C01 LOT : GS11620168 QTY(PCS): 4000 BIN/HUE : A1/B2 HUE : Chromaticity Coordinates (CIE_x , CIE_y) VF:2.8-2.9 VF : Forward Voltage Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0±0.5 178 ±1.5 60 ±1.0 9.0±1.0 ψ13.5±1.0 12.0±1.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 10/13 PART NO. LG-192WK-DT/T-P-1-C01 Box Explanation 1. 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm L W H LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LG-192WK-DT/T-P-1-C01 Page 11/13 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280 ℃ 3 sec one time only. 2 PB-Free Reflow Solder 1~5°C/sec 1~5°C/sec Preheat 180~200°C 260°C MaX. 10sec.Max 6°C/sec Above 220°C 60 sec.Max. 120 sec.Max. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 3.After soldering,do not warp the circuit board. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 12/13 PART NO. LG-192WK-DT/T-P-1-C01 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 °C~30°C,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 °C ~ 30 °C,RH60%, they should be treated at 60 °C±5 °C for 24hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forward current should not be allowed to change by more than 40% of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 13/13 PART NO. LG-192WK-DT/T-P-1-C01 Reliability Test: Classification Test Item Test Condition Sample Size Operating Life Test 1.Ta=25°C 2.If=5mA 3.t=1000 hrs (-24hrs,+72hrs) 22 High Temperature Storage Test 1.Ta=100°C±5°C 2.t=1000 hrs (-24hrs,+72hrs) 22 Low Temperature Storage Test 1.Ta=-40°C±5°C 2.t=1000 hrs (-24hrs,+72hrs) 22 High Temperature High Humidity Storage Test 1.Ta=85°C 2.RH=85% 3.t=1000hrs(-24hrs,+72hrs) 22 1.Ta=100°C±5°C ~ -40°C±5°C 20min/ 10sec / 20min 2.total 100 cycles 22 1.100°C±5°C ~ -40°C±5°C 30mins / 5mins / 30mins 2.100 Cyeles 22 Endurance Test Thermal Shock Test Environmental Test Temperature Cycling IR Reflow 1.T=260°C Max. 10sec.Max. 2. 6 Min 22