LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts LUY9S53R-HC-T60 DATA SHEET DOC. NO : QW0905-LUY9S53R-HC-T60 REV. : B DATE : 16 - Feb. - 2016 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/11 PART NO. LUY9S53R-HC-T60 Features: 1. Top view LED. 2. White SMT package. 3. Leadframe package with individual 2 pin. 4.Wide viewing angle. 5.Soldering methods:IR reflow soldering. 6.Feature of the device:more light due to higher optical efficiency;extremely wide viewing angle;ideal for backlighting and coupling in light guide. 7.Qualification according to AEC-Q101 Descriptions: The LUYS9S53R SMD has wide viewing angle and optimized light coupling by inter reflector,The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications: 1. Telecommunication: indicator and backlighting in telephone and fax. 2. Indicators. 3. Switch lights. 4. Automotive backlighting or indicator. Device Selection Guide: PART NO MATERIAL LUY9S53R-HC-T60 AlGaInP COLOR Emitted Lens Yellow Water Clear LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/11 PART NO. LUY9S53R-HC-T60 Package Dimensions 3.0 2.0 0.25 1 2.06 2 Anode Mark 0.8 0.75 1.9 1 1.4 2 2 Cathode Anode 1 Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 0.95 2.1 2 1 1.6 0.15 Note : The tolerances unless mentioned is ±0.1mm,Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/11 PART NO. LUY9S53R-HC-T60 Absolute Maximum Ratings at Ta=25℃ Ratings Parameter Symbol UNIT UY(R) Forward Current IF 60 mA Peak Forward Current Duty 1/10@10KHz IFP 120 mA Power Dissipation PD 156 mW Reverse Current @5V Ir 10 μA Electrostatic Discharge ESD 2000 V Operating Temperature Topr - 40 ~ + 85 ℃ Storage Temperature Tstg - 40 ~ + 100 ℃ Typical Electrical & Optical Characteristics (Ta=25℃) Items Symbol Min. IF=60mA 590 ---- nm IF=60mA ---- 20 ---- nm IF=60mA VF 1.8 ---- 2.6 V IF=60mA 2θ 1/2 ---- 120 ---- deg IF=60mA Dominant Wavelength λD ---- △λ Viewing Angle CONDITION mcd Iv Forward Voltage Max. UNIT ---- 2000 2550 Luminous Intensity Spectral Line Half-Width Typ. Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2.The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/11 PART NO. LUY9S53R-HC-T60 Luminous Intensity Classification BIN CODE Iv(mcd) at 60mA Min. Max. X-1 2000 2550 X-2 2550 3200 Y-1 3200 4000 Dominant Wavelength Classification BIN CODE 15 16 17-1 17-2 17-3 18 19 λD(nm) at 60mA Min. Max. 585 587 589 590 591 592 595 587 589 590 591 592 595 598 Forward Voltage Classification BIN CODE Vf(v) at 20mA Min. Max. 1 1.8 2 2 2 2.2 3 2.2 2.4 4 2.4 2.6 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page5/11 PART NO. LUY9S53R-HC-T60 Typical Electro-Optical Characteristics Curve UYR CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @60mA Forward Current(mA) 1000 100 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0.0 1.0 1.5 2.0 2.5 1.0 3.0 10 1000 Forward Current(mA) Forward Voltage(V) Fig.4 Relative Intensity vs. Temperature Fig.3 Forward Voltage vs. Temperature 1.2 3.0 Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ 100 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 2.5 2.0 1.5 1.0 0.5 0.0 -40 100 -20 0 20 40 60 80 100 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Fig.6 Directive Radiation Relative Intensity@20mA 1.0 0° -30° 30° 0.5 -60° 60° 0.0 500 550 600 650 100% 75% 50% Wavelength (nm) 25% 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/11 PART NO. LUY9S53R-HC-T60 Carrier Type Dimensions 4.0 4.0 2.0 1.5 0.25 1.75 3.5 8.0±0.3 5.3 3.44 Polarity 1.53 Note : The tolerances unless mentioned is ± 0.1mm,Unit=mm. ‧ Packing Specifications 0.2 0.8 0.6 Aluminum Moist-Proof bag Label 0.8 0.6 0.2 0.4 0.4 Label Part No. Description Quantity/Reel LUY9S53R-HC-T60 8.0mm tape,7"reel 2000 PCS LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/11 PART NO. LUY9S53R-HC-T60 Label Explanation LIGITEK ELECTRONICS CO., LTD. Pb PART : LUY9S53R-HC-T60 BIN : Luminous Intensity LOT : GS11620168 HUE : Dominant Wavelength QTY(PCS): 2000 VF : Forward Voltage BIN/HUE : X-1/16 VF:2.0-2.2 Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0±0.5 ψ13.5±1.0 178±1.5 60.0±1.0 13.0±1.0 16.0±1.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/11 PART NO. LUY9S53R-HC-T60 Box Explanation 1. 4 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm L W H LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 9/11 PART NO. LUY9S53R-HC-T60 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 320°C 3 sec one time only. 2 PB-Free Reflow Solder 1~5°C/sec 1~5°C/sec Preheat 180~200°C 260°C MaX. 10sec.Max 6°C/sec Above 220°C 60 sec.Max. 120 sec.Max. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 3.After soldering,do not warp the circuit board. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 10/11 PART NO. LUY9S53R-HC-T60 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 °C~30°C,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 °C ~ 30 °C,RH60%, they should be treated at 60 °C±5 °C for 24hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40% of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 11/11 PART NO. LUY9S53R-HC-T60 Reliability Test: (1)Test items and results Classification Test Item Test Condition Sample Size Operating Life Test 1.Ta=25°C 2.If=60mA 3.t=1000 hrs (-24hrs,+72hrs) 22 High Temperature Storage Test 1.Ta=100°C±5°C 2.t=1000 hrs (-24hrs,+72hrs) 22 Low Temperature Storage Test 1.Ta=-40°C±5°C 2.t=1000 hrs (-24hrs,+72hrs) 22 High Temperature High Humidity Storage Test 1.Ta=85°C 2.RH=85% 3.t=1000hrs(-24hrs,+72hrs) 22 1.Ta=100°C±5°C ~ -40°C±5°C 20min/ 10sec / 20min 2.total 100 cycles 22 1.100°C±5°C ~ -40°C±5°C 30mins / 5mins / 30mins 2.100 Cyeles 22 Endurance Test Thermal Shock Test Environmental Test Temperature Cycling IR Reflow 1.T=260°C Max. 10sec.Max. 2. 6 Min 22