D-sub Connectors XM3 D-sub Connectors Are Ideal for Office Automation Interfacing. ■ Shielded against EMI. ■ A new line of multi-hole, ferrite-core Connectors (XM3B-F) offers space-saving design and superior noise protection at high frequency. ■ Fitted in a rugged, compact metal shell. ■ Many kinds of standard Anchors and grounding fixtures available. ■ The XM3 conform to UL standards (No. E103202) RoHS Compliant ■ Terminology z Shielded connector z Shell Connector having a structure that can be grounded. Refers to the case covering the connector. Here, the shell refers to the metal parts attached to the mating end. z Beating A processing technique that ensures the contact amongst the shells by beating a part of the shell. ■ Connectors Model XM3B XM3B-F Appearance Sockets with right-angle DIP terminals Reference page 3 to 4 Model Sockets with right-angle DIP terminals (with ferrite core) 5 XM3C XM3F XM3A XM3D Plugs with solder-cup terminals Sockets with solder-cup terminals Appearance Plugs with right-angle DIP terSockets with straight DIP terminals minals Reference page 6 to 7 8 9 1 ■ Ratings and Characteristics Model XM3A XM3B XM3B-F All XM3C models except for those with 37 pins XM3D XM3F Item Rated current 5A Rated voltage 300 VAC Contact resistance 15 mΩ max. (at 20 mVDC, 100 mA max.) XM3C models with 37 pins 3A Insulation resistance 1,000 MΩ min. (at 500 V DC) Dielectric strength 1,000 VAC for 1 min (leakage current: 1 mA max.) Insertion durability 200 times Ambient operating temperature −55 to 105°C (with no condensation or icing) ■ Materials and Finish Item Model Housing XM3B XM3B-F XM3C XM3F XM3D PBT (UL94 V-0)/Milky white Mating end Phosphor bronze/nickel base, gold plated Bronze/nickel base, gold plated Phosphor bronze/nickel base, gold plated Terminals Phosphor bronze/nickel base, tin plated Bronze/nickel base, tin plated Phosphor bronze/nickel base, tin plated Contacts Shell Phosphor bronze/nickel base, tin plated Steel/nickel plated ■ Applicable Wires The applicable wires for solder cup terminals are AWG 22 to 28 (solid or stranded). 2 XM3A PBT (UL94 V-0)/black D-sub Connectors XM3 XM3B Sockets with Right-angle DIP Terminals ■ Model Number Legend XM3B-@@22-@@@ 1 2 3 4 1. Number of contacts 09: 9 contacts 15: 15 contacts 25: 25 contacts 37: 37 contacts 2. Anchor specifications 1: With Anchor 2 5: No anchors 3. Anchor screw specifications 1: M2.6 × 0.45 metric screws 3: #4-40 UNC inch screws 0: No anchors 4. Grounding Fixture 1: Tap Hole Grounding Fixture 2: Lock Pin Grounding Fixture Note: Anchors and Grounding Fixtures are not supplied if 2, 3,and 4 are blank. ■ Dimensions (unit: mm) XM3B-@@22 (No anchors, no grounding fixtures) XM3B-@@22-501 (No anchors, Tap Hole Grounding Fixtures) XM3B-@@22-111 (With Anchor 2 (See note 1.), Tap Hole Grounding Fixtures) XM3B-@@22-131 (With Anchor 2 (See note 2.), Tap Hole Grounding Fixtures) XM3B-@@22-502 (No anchors, Lock Pin Grounding Fixtures) XM3B-@@22-112 (With Anchor 2 (See note 1.), Lock Pin Grounding Fixtures) XM3B-@@22-132 (With Anchor 2 (See note 2.), Lock Pin Grounding Fixtures) Note: 1. Metric screws (M2.6 × 0.45) 2. Inch screws (#4-40 UNC) Two, 3.1 dia. 25-contact model shown above. (With anchor 2, Lock Pin, Grounding Fixtures) Note: XM3B Sockets were manufactured in accordance with JIS X 5101. Terminal pitches are a mixed arrangement of 2.77- and 2.74-mm contacts on 25and 37-contact models as specified in the JIS standard. A pitch of 2.76 mm is recommended for the mounting holes because of the more advanced numerical control available today. This is sufficient to avoid any problems. Mounting holes (t = 1.6 mm, bottom view) Dimensions No. of contacts Dimensions (mm) A B C D E F 9 30.8 24.99 16.30 10.96 8.22 2.74 15 39.1 33.32 24.65 19.18 16.44 2.74 25 53.0 47.04 38.35 33.12 30.36 2.76 37 69.3 63.50 54.80 49.68 46.92 2.76 Two, 3.2 ±0.1 dia. 1 ±0.1 dia. D-sub Connectors XM3 3 ■ Ordering Information Anchor 2 and Tap Hole Grounding Fixtures Anchor 2 and Lock Pin Grounding Fixtures No anchors or grounding fixtures (See note 1.) Appearance Anchor 2 Anchor 2 Lock Pin Grounding Fixture Tap Hole Grounding Fixture Accessories XM2Z-0011 Anchor 2 (M2.6 × 0.45 metric screws) XM2Z-0061 Tap Hole Grounding Fixtures No. of contacts --- XM2Z-0062 Lock Pin Grounding Fixtures --- 9 XM3B-0922-111 XM3B-0922-112 XM3B-0922 15 XM3B-1522-111 XM3B-1522-112 XM3B-1522 25 XM3B-2522-111 XM3B-2522-112 XM3B-2522 37 XM3B-3722-111 XM3B-3722-112 XM3B-3722 Accessories XM2Z-0013 Anchor 2 (#4-40 UNC inch screws) XM2Z-0061 Tap Hole Grounding Fixtures No. of contacts XM2Z-0062 Lock Pin Grounding Fixtures 9 XM3B-0922-131 XM3B-0922-132 15 XM3B-1522-131 XM3B-1522-132 25 XM3B-2522-131 XM3B-2522-132 37 XM3B-3722-131 XM3B-3722-132 No anchors, with Tap Hole Grounding Fixtures No anchors, with Lock Pin Grounding Fixtures Appearance Tap Hole Grounding Fixture No anchors Accessories No. of contacts Lock Pin Grounding Fixture XM2Z-0061 Tap Hole Grounding Fixtures XM2Z-0062 Lock Pin Grounding Fixtures 9 XM3B-0922-501 XM3B-0922-502 15 XM3B-1522-501 XM3B-1522-502 25 XM3B-2522-501 XM3B-2522-502 37 XM3B-3722-501 XM3B-3722-502 Note: 1. Use the XM3B-@@22 (No anchors or grounding fixtures) in combination with suitable Anchors and Grounding Fixtures. 2. Two M3 × 0.5 Tap Hole Grounding Fixtures and an M3 × 0.5 Lock Pin Grounding Fixture for the Anchor side are provided. 3. For other models with Anchors or Grounding Fixtures, contact your OMRON representative. For accessories, refer to Accessories (Sold Separately) in the XM2/XM3 datasheet. 4 D-sub Connectors XM3 XM3B-F Sockets with Right-angle DIP Terminals and Ferrite Cores ■ Dimensions (unit: mm) Sockets with Right-angle DIP Terminals XM3B-@@22-501F (With Tap Hole Grounding Fixtures) 25-contact model shown above. (With Tap Hole Grounding Fixtures) Two, M3 Note: XM3B Sockets were manufactured in accordance with JIS X 5101. Terminal pitches are a mixed arrangement of 2.77- and 2.74-mm contacts on 25and 37-contact models as specified in the JIS standard. A pitch of 2.76 mm is recommended for the mounting holes because of the more advanced numerical control available today. This is sufficient to avoid any problems. Tap Hole Grounding Fixture Two, M3 Ferrite core Dimensions Mounting holes (t = 1.6 mm, bottom view) No. of contacts Two, 3.2 ±0.1 dia. Dimensions (mm) A B C D E F G 9 30.8 24.99 16.30 10.96 8.22 2.74 14.3 15 39.1 33.32 24.65 19.18 16.44 2.74 22.0 25 53.0 47.04 38.35 33.12 30.36 2.76 36.5 37 69.3 63.50 54.80 49.68 46.92 2.76 53.3 1 ±0.1 dia. ■ Ordering Information Tap Hole Grounding Fixtures Appearance Tap Hole Grounding Fixture Accessories XM2Z-0061 Tap Hole Grounding Fixtures No. of contacts 9 XM3B-0922-501F 15 XM3B-1522-501F 25 XM3B-2522-501F 37 XM3B-3722-501F D-sub Connectors XM3 5 XM3C Plugs with Right-angle DIP Terminals ■ Model Number Legend XM3C-@@22-@@@ 1 2 3 4 2. Anchor specifications 1: With Anchor 2 5: No anchors 1. Number of contacts 09: 9 contacts 15: 15 contacts 25: 25 contacts 37: 37 contacts 3. Anchor screw specifications 1: M2.6 × 0.45 metric screws 3: Inch screws 0: No anchors 4. Grounding Fixture 1: Tap Hole Grounding Fixture 2: Lock Pin Grounding Fixture Note: Anchors and Grounding Fixtures are not supplied if 2, 3, and 4 are blank. ■ Dimensions (unit: mm) DIP Terminals XM3C-@@22 (No Anchors or Grounding Fixtures) XM3C-@@22-501 (No Anchors, with Tap Hole Grounding Fixtures) XM3C-@@22-502 (No Anchors, with Lock Pin Grounding Fixtures) XM3C-@@22-111 (With Anchor 2 and Tap Hole Grounding Fixtures) XM3C-@@22-112 (With Anchor 2 and Lock Pin Grounding Fixtures) A B C D E F G 3.2 6.25 12.5 25-contact model shown above. (No Anchor or Grounding Fixtures) N N-1 8.35 2 1 Two, 3.1 dia. Note: XM3C Terminals were manufactured in accordance with JIS X 5101. Terminal pitches are a mixed arrangement of 2.77- and 2.74-mm contacts on 25- and 37-contact models as specified in the JIS standard. A pitch of 2.76 mm is recommended for the mounting holes because of the more advanced numerical control available today. This is sufficient to avoid any problems. 5.9 18.5 0.3 3.6 2.84 9.6 3.3 3.0 B Dimensions Mounting holes (t = 1.6 mm, bottom view) No. of contacts B±0.1 D±0.1 E±0.1 F±0.1 15.5 9.9 N-1 N 1 2 3.0 1±0.1 dia. 2.84±0.1 Two, 3.2±0.1 dia. F±0.1 6 D-sub Connectors XM3 A B C D E F G 9 30.8 24.99 16.91 10.96 8.22 2.74 1.37 15 39.1 33.32 25.25 19.18 16.44 2.74 1.37 25 53.0 47.04 38.96 33.12 30.36 2.76 1.38 37 69.3 63.50 55.42 49.68 46.92 2.76 1.38 ■ Ordering Information Anchor 2 and Tap Hole Grounding Fixtures Appearance No anchors or Grounding Fixtures Lock Pin Grounding Fixture Tap Hole Grounding Fixture Anchor 2 Anchor 2 Accessories No. of contacts Anchor 2 and Lock Pin Grounding Fixtures XM2Z-0011 Anchor 2 (M2.6 × 0.45 metric screws) Tap Hole Grounding Fixtures --- Lock Pin Grounding Fixtures --- 9 XM3C-0922-111 XM3C-0922-112 XM3C-0922 15 XM3C-1522-111 XM3C-1522-112 XM3C-1522 25 XM3C-2522-111 XM3C-2522-112 XM3C-2522 37 XM3C-3722-111 XM3C-3722-112 XM3C-3722 No anchors, with Tap Hole Grounding Fixtures Appearance Tap Hole Grounding Fixture Accessories No. of contacts No anchors, with Lock Pin Grounding Fixtures Lock Pin Grounding Fixture No anchors Tap Hole Grounding Fixtures Lock Pin Grounding Fixtures 9 XM3C-0922-501 XM3C-0922-502 15 XM3C-1522-501 XM3C-1522-502 25 XM3C-2522-501 XM3C-2522-502 37 XM3C-3722-501 XM3C-3722-502 Note: The XM3C-@@22-111/-112 with Anchor 2 (M2.6 × 0.45) and Grounding Fixtures as well as the XM3C-@@22-501/-502 with Grounding Fixtures and no Anchor are available as standard models. Two M3 × 0.5 Tap Hole Grounding Fixtures and an M3 × 0.5 Lock Pin Grounding Fixture for the Anchor side are provided. Contact your OMRON representative for other anchor and grounding fixture specifications. See Accessories (Sold Separately) of XM2/XM3 for details on accesories. Tap Hole Grounding Fixtures and Lock Pin Grounding Fixtures are not sold separately. D-sub Connectors XM3 7 XM3F Sockets with Straight DIP Terminals ■ Dimensions (unit: mm) Straight DIP Terminals XM3F-@@20 (No Anchor or Grounding Fixtures) XM3F-@@20-112 (With Anchor and Lock Pin Grounding Fixtures) 25-contact model shown on the left. (No anchors or grounding fixtures) A B 25-contact model shown on the left. (With Anchors and Grounding Fixtures) A B Two, 3.1 dia. N-1 N M2.6×0.45 N-1 N 12.5 7.9 12.5 7.9 1 1 2 H 2 H 5 6.1 0.3 6.8 7 0.5 7 0.7 3.2 0.5 6.1 0.3 Anchor 3.2 2.8 0.7 2.84 C C F F 1 1 2 2 9 9 N-1 D N N-1 D E G Dimensions No. of contacts A N E G Mounting holes (t = 1.6 mm, bottom view) B C D E F G B±0.1 H E±0.1 (D) 9 30.7 24.99 10.98 1.37 8.22 2.74 19.00 16.33 15 39.0 33.32 19.20 1.37 16.44 2.74 27.12 24.66 25 52.9 47.04 33.12 1.38 30.36 2.76 41.04 38.38 37 69.2 63.50 49.68 1.38 46.92 2.76 57.60 54.84 Two, 3.2±0.1 dia. F±0.1 N N-1 2 1±0.1 dia. C±0.1 ■ Ordering Information No anchors or Grounding Fixtures Anchors and Lock Pin Grounding Fixtures Appearance No. of contacts 9 XM3F-0920 XM3F-0920-112 15 XM3F-1520 XM3F-1520-112 25 XM3F-2520 XM3F-2520-112 37 XM3F-3720 XM3F-3720-112 D-sub Connectors XM3 1 2.84 F±0.1 8 Lock Pin Grounding 0.5 Fixture 2.84 XM3A Plugs with Solder-cup Terminals XM3D Sockets with Solder-cup Terminals ■ Dimensions (unit: mm) XM3A-@@21 Plugs/Solder-cup Terminals A B C D Two, 3.1 dia. E 1 2 12.4 8.35 N-1 N G Note: 25-contact model shown above. F 5.9 8.25 1.5 Dimensions (XM3A) 1.48 dia. No. of contacts XM3D-@@21 Sockets, Solder-cup Terminals A B C D E F G 9 30.7 24.99 16.91 10.96 8.22 2.74 1.37 15 39.0 33.32 25.25 19.18 16.44 2.74 1.37 25 52.9 47.04 38.96 33.12 30.36 2.76 1.38 37 69.2 63.50 55.42 49.68 46.92 2.76 1.38 A B C D E Two, 3.1 dia. 2 1 12.4 7.9 N G N-1 F Note: 25-contact model shown above. 6.1 8.45 Dimensions (XM3D) 1.5 No. of contacts 1.53 dia. A B C D E F G 9 30.7 24.99 16.33 10.96 8.22 2.74 1.37 15 39.0 33.32 24.66 19.18 16.44 2.74 1.37 25 52.9 47.04 38.38 33.12 30.36 2.76 1.38 37 69.2 63.50 54.84 49.68 46.92 2.76 1.38 ■ Ordering Information Plugs Sockets Appearance No. of contacts 9 XM3A-0921 XM3D-0921 15 XM3A-1521 XM3D-1521 25 XM3A-2521 XM3D-2521 37 XM3A-3721 XM3D-3721 D-sub Connectors XM3 9 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation 10 D-sub Connectors XM3 Company Electronic and Mechanical Components Contact: www.omron.com/ecb Cat. No. G057-E1-02 1014(0412)(O)