Datasheet

UNISONIC TECHNOLOGIES CO., LTD
1N5401G
DIODE
GLASS PASSIVATED SILICON
RECTIFIER

1
DESCRIPTION
The UTC 1N5401G is a glass passivated silicon rectifier, it uses
UTC’s advanced technology to provide customers with high forward
surge current and low reverse leakage, etc.

FEATURES
* Low reverse leakage
* High forward surge current capability

SYMBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
1N5401GL-Z21D-B
1N5401GP-Z21D-B
Note: Pin Assignment: A: Anode
K: Cathode

2
Package
DO-201AD
Pin Assignment
1
2
K
A
DO-201AD
Packing
Tape Box
MARKING
Cathode Band for uni-directional Only
5401G
L: Lead Free
P: Halogen Free
Date Code
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 4
QW-R601-215.C
1N5401G

DIODE
ABSOLUTE MAXIMUM RATINGS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
Working Peak Reverse Voltage
VRWM
100
V
Repetitive Peak Reverse Voltage
VRRM
100
V
RMS Voltage
VRMS
70
V
DC Blocking Voltage
VDC
100
V
Average Forward Rectified Current 0.375”(9.5mm) Lead
I(AV)
3.0
A
Length at TA=75°C
Peak Forward Surge Current 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
IFSM
200
A
(JEDEC Method)
Junction Temperature
TJ
-65~+175
°C
Storage Temperature
TSTG
-65~+175
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL DATA
PARAMETER
Junction to Ambient (Note 2)

SYMBOL
θJA
RATINGS
20
UNIT
°C/W
ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
Instantaneous Forward Voltage
VF
IF=3.0A
1.2
V
DC Reverse Current at Rated DC Blocking
TA=25°C
5.0
μA
IR
Voltage
100 μA
TA=100°C
Junction Capacitance (Note 1)
CJ
30
pF
Notes: 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 4
QW-R601-215.C
1N5401G

DIODE
TYPICAL CHARACTERISTICS
Maximum Non-repetitive Peak Forward
Surge Current
200
3
Peak Forward Surge Current, IFSM (A)
Average Forward Rectified Current, IO (A)
Forward Current Derating Curve
2.4
1.8
1.2
0
0
Single Phase Half Wave 60Hz
Resistive or inductive Load
25
50
75
100
125
150
160
120
80
8.3ms SINGLE
HALF SINE-WAVE
(JEDEC Method)
40
0
1
175
10
Number of Cycles at 60Hz
Ambient Temperature, TA (°C)
Typical Reverse Characteristics
1,000
20
10
Nstantaneous Reverse Current, (μA)
Instantaneous Forward Current (A)
Typical Instantaneous Forward
Characteristics
1
0.1
0.01
0.6
TJ=25°C
Pulse Width=300s
1% Duty Cycle
0.8
1.0
1.2
100
0.1
TJ=25°C
0.01
Transient Thermal Impedance (°C/W )
Junction Capacitance, CJ (pF)
20
40
60
80
100
Typical Transient Thermal Impedance
TJ=25°C
10
100
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
0
Percent of Peak Reverse Voltage (%)
Typical Junction Capacitance
1.0
10
Reverse voltage (V)
TJ=100°C
1
1.4 1.5
200
1
0.1
TJ=150°C
10
Instantaneous Forward Voltage, VFM (V)
100
100
100
10
1
0.1
0.01
0.1
1
10
t, Pulse Duration (sec.)
100
3 of 4
QW-R601-215.C
1N5401G
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R601-215.C
Similar pages