LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED SMD Pb Lead-Free Parts LG-197RGB-CT-3C1-A01 DATA SHEET DOC. NO : QW0905-LG-197RGB-CT-3C1-A01 REV. : A DATE : 13 - Nov. - 2015 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/14 PART NO. LG-197RGB-CT-3C1-A01 Features: 1. Package in 8.0mm carrier tape on 7" diameter reel. 2. Compatible with automatic placement equipment. 3. Compatible with infrared and vapor phase reflow solder process. Descriptions: 1. The LG-197 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. 2. Besides, lightweight makes them ideal for miniature applications. etc. Applications: 1. Automotive : backlighting in dashboard and switch. 2. Telecommunication : indicator and backlighting in telephone and fax. 3. Flat backlight for LCD, switch and symbol 4. General use. Device Selection Guide: PART NO LG-197RGB-CT-3C1-A01 COLOR Chip Code MATERIAL HRF AlGaInP Red DGM InGaN Green DBK lnGaN Blue Emitted Lens Water Clear LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/14 PART NO. LG-197RGB-CT-3C1-A01 Package Dimensions 0.55 1 2 Soldering Terminal 1.5 0.25 0.18 0.4 G R 0.8 1.1 B 0.4 RESIN 4 3 0.6 PCB B G R 3 2 1 Common Andoe Mark - - - + 4 Note : 1.All dimension are in millimeter tolerance is ±0.1mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 2.2 0.4 1.85 0.25 Note : The tolerances unless mentioned is ±0.1mm,Angle ±0.5. Unit=mm. 0.6 1.6 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/14 PART NO. LG-197RGB-CT-3C1-A01 Absolute Maximum Ratings at Ta=25℃ Parameter Ratings Symbol UNIT R G B Power Dissipation PD 60 72 72 mW Peak Forward Current Duty 1/10@10KHz IFP 90 100 100 mA Forward Current IF 25 20 20 mA Reverse Current @5V Ir 10 50 50 μA Electrostatic Discharge ESD 2000 500 500 V Operating Temperature Topr -40 ~ + 85 ℃ Storage Temperature Tstg -40 ~ + 100 ℃ LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/14 PART NO. LG-197RGB-CT-3C1-A01 Typical Electrical & Optical Characteristics (Ta=25℃) Items Luminous Intensity Dominant Wavelength Spectral Line Half-Width Forward Voltage Viewing Angle Symbol Iv λD △λ VF 2θ 1/2 Min. Typ. Max. UNIT R 80 ---- 225 G 125 ---- 450 B 50 ---- 180 R 614 ---- 634 G 515 ---- 535 B 465 ---- 475 R ---- 20 ---- G ---- 36 ---- B ---- 30 ---- R 1.5 ---- 2.4 G 2.8 ---- 3.6 B 2.8 ---- 3.6 R ---- 140 ---- G ---- 140 ---- B ---- 140 ---- Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 3.The dominant wavelength data did not including ±1nm testing tolerance. CONDITION mcd IF=20mA nm IF=20mA nm IF=20mA V IF=20mA deg IF=20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/14 PART NO. LG-197RGB-CT-3C1-A01 Luminous Intensity Classification BIN CODE R Min. Max. Q 80 125 R 125 200 S 200 225 BIN CODE G Iv(mcd) at 20mA Min. Max. R 125 200 S 200 320 T 320 450 BIN CODE B Iv(mcd) at 20mA Iv(mcd) at 20mA Min. Max. P 50 80 Q 80 125 R 125 180 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/14 PART NO. LG-197RGB-CT-3C1-A01 Typical Electro-Optical Characteristics Curve R CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.5 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 2.5 2.0 1.5 1.0 0.5 0 0.1 1.0 1.5 2.0 2.5 3.0 1.0 10 Fig.3 Forward Current vs. Temperature Fig.4 Relative Intensity vs. Temperature 40 20 10 0 0 20 40 60 80 100 Relative Intensity@20mA Normalize@25℃ 3.0 30 2.5 2.0 1.5 1.0 0.5 0 -40 -20 -0 20 40 Ambient Temperature (Ta°C) Relative Intensity@20mA Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0 550 1000 Forward Current(mA) Forward Voltage(V) Forward Current(mA) 100 600 650 Wavelength (nm) 700 Fig.6 Directive Radiation 60 80 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/14 PART NO. LG-197RGB-CT-3C1-A01 Typical Electro-Optical Characteristics Curve G CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 2.5 2.0 1.5 1.0 0.5 0.0 0.1 1.0 2.0 3.0 4.0 1.0 5.0 10 Fig.3 Forward Current vs. Temperature Fig.4 Relative Intensity vs. Temperature 3.0 Relative Intensity@20mA Normalize @25℃ Forward Current(mA) 40 30 20 10 0 0 20 40 60 80 100 Ambient Temperature (Ta°C) 0.5 0.0 550 Wavelength (nm) 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 Fig.6 Directive Radiation 1.0 500 2.5 80 Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Relative Intensity@20mA 1000 Forward Current(mA) Forward Voltage(V) 450 100 600 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/14 PART NO. LG-197RGB-CT-3C1-A01 Typical Electro-Optical Characteristics Curve B CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0.0 1.0 3.0 2.0 4.0 5.0 1 10 Fig.4 Relative Intensity vs. Temperature Fig.3 Forward Current vs. Temperature Relative Intensity@20mA Normalize @25℃ Forward Current(mA) 40 30 20 10 0 20 40 60 80 100 Ambient Temperature (Ta°C) Relative Intensity@20mA 1.0 0.5 0.0 450 500 Wavelength (nm) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength 400 1000 Forward Current(mA) Forward Voltage(V) 0 100 550 Fig.6 Directive Radiation 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 9/14 PART NO. LG-197RGB-CT-3C1-A01 Carrier Tape Dimensions 4.0±0.2 0.23 2.0 1.75 - 3.5 ±0.2 8.0±0.3 1.75 5.3 0.7 1.65 4.0±0.2 + Note : The tolerances unless mentioned is ± 0.1mm,Angle ± 0.5. Unit=mm. ‧ Packing Specifications Label Aluminum Moist-Proof bag Label Part No. Description Quantity/Reel LG-197RGB-CT-3C1-A01 8.0mm tape,7"reel 4000 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 10/14 PART NO. LG-197RGB-CT-3C1-A01 Label Explanation LIGITEK ELECTRONICS CO., LTD. Pb PART : LG-197RGB-CT-3C1-A01 LOT : GS115A0168 QTY(PCS): 4000 VF:2.8-3.6 BIN/HUE : Q-R-P VF:2.8-3.6 BIN : Luminous Intensity VF:1.5-2.4 HUE : Dominant Wavelength VF : Forward Voltage Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0 ±0.5 178 ±1.5 60 ±1.0 9.0±1.0 ψ13.5±1.0 12.0±1.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 11/14 PART NO. LG-197RGB-CT-3C1-A01 Box Explanation 1. 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm L W H LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LG-197RGB-CT-3C1-A01 Page 12/14 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280 ℃ 3 sec one time only. 2 PB-Free Reflow Solder 1~5°C/sec 1~5°C/sec Preheat 180~200°C 260°C MaX. 10sec.Max 6°C/sec Above 220°C 60 sec.Max. 120 sec.Max. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 3.After soldering,do not warp the circuit board. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 13/14 PART NO. LG-197RGB-CT-3C1-A01 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 °C~30°C,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 °C ~ 30 °C,RH60%, they should be treated at 60 °C±5 °C for 24hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forward current should not be allowed to change by more than 40% of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 14/14 PART NO. LG-197RGB-CT-3C1-A01 Reliability Test: Classification Test Item Test Condition Sample Size Operating Life Test 1.Ta=25°C 2.If=20mA 3.t=1000 hrs (-24hrs,+72hrs) 22 High Temperature Storage Test 1.Ta=100°C±5°C 2.t=1000 hrs (-24hrs,+72hrs) 22 Low Temperature Storage Test 1.Ta=-40°C±5°C 2.t=1000 hrs (-24hrs,+72hrs) 22 High Temperature High Humidity Storage Test 1.Ta=85°C 2.RH=85% 3.t=1000hrs(-24hrs,+72hrs) 22 1.Ta=100°C±5°C ~ -40°C±5°C 20min/ 10sec / 20min 2.total 100 cycles 22 1.100°C±5°C ~ -40°C±5°C 30mins / 5mins / 30mins 2.100 Cyeles 22 Endurance Test Thermal Shock Test Environmental Test Temperature Cycling IR Reflow 1.T=260°C Max. 10sec.Max. 2. 6 Min 22