LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED SMD Pb Lead-Free Parts LG-197RGB-C-CT-3C1 DATA SHEET DOC. NO : QW0905-LG-197RGB-C-CT-3C1B REV. : A DATE : 20 - Apr. - 2016 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/14 PART NO. LG-197RGB-C-CT-3C1 Features: 1. Package in 8.0mm carrier tape on 7" diameter reel. 2. Compatible with automatic placement equipment. 3. Compatible with infrared and vapor phase reflow solder process. Descriptions: 1. The LG-197 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. 2. Besides, lightweight makes them ideal for miniature applications. etc. Applications: 1. Automotive : backlighting in dashboard and switch. 2. Telecommunication : indicator and backlighting in telephone and fax. 3. Flat backlight for LCD, switch and symbol 4. General use. Device Selection Guide: PART NO LG-197RGB-C-CT-3C1 MATERIAL COLOR Emitted AlGaInP Red InGaN Green lnGaN Blue Lens Water Clear LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/14 PART NO. LG-197RGB-C-CT-3C1 Package Dimensions 2 0.55 3 Soldering Terminal 1.5 0.25 0.18 0.4 Green Red 0.8 1.1 Blue 1.6 0.4 RESIN 1 4 0.6 PCB Common Cathode Mark 0.6 Blue Green Red 4 3 2 + + + - 1 Note : 1.All dimension are in millimeter tolerance is ±0.1mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 2.2 0.9 + 1.5 0.5 Note : The tolerances unless mentioned is ±0.1mm,Angle ±0.5. Unit=mm. + + LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/14 PART NO. LG-197RGB-C-CT-3C1 Absolute Maximum Ratings at Ta=25℃ Parameter Symbol Ratings HRFS (Red) DGM (Green) DBK (Blue) UNIT Power Dissipation PD 65 72 72 mW Peak Forward Current Duty 1/10@10KHz IFP 60 100 100 mA Forward Current IF 25 20 20 mA Reverse Current @5V Ir 10 50 50 μA Electrostatic Discharge ESD 2000 500 500 V Operating Temperature Topr -40 ~ + 85 ℃ Storage Temperature Tstg -40 ~ + 100 ℃ LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/14 PART NO. LG-197RGB-C-CT-3C1 Typical Electrical & Optical Characteristics (Ta=25℃) Items Luminous Intensity Dominant Wavelength Spectral Line Half-Width Forward Voltage Viewing Angle Min. Typ. Max. UNIT HRFS 125 200 ---- DGM 200 500 ---- DBK 50 125 ---- HRFS ---- 625 ---- DGM ---- 525 ---- DBK ---- 470 ---- HRFS ---- 20 ---- DGM ---- 36 ---- DBK ---- 30 ---- HRFS 1.7 ---- 2.6 DGM 2.8 ---- 3.6 DBK 2.8 ---- 3.6 HRFS ---- 140 ---- DGM ---- 140 ---- DBK ---- 140 ---- Symbol Iv λD △λ VF 2θ 1/2 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. CONDITION mcd IF=20mA nm IF=20mA nm IF=20mA V IF=20mA deg IF=20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/14 PART NO. LG-197RGB-C-CT-3C1 Luminous Intensity Classification BIN CODE HRFS (Red) Min. Max. R 125 200 S 200 320 T 320 500 BIN CODE DGM (Green) S T U V BIN CODE DBK (Blue) Iv(mcd) at 20mA P Q R S Iv(mcd) at 20mA Min. Max. 200 320 500 800 320 500 800 1250 Iv(mcd) at 20mA Min. Max. 50 80 125 200 80 125 200 320 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/14 PART NO. LG-197RGB-C-CT-3C1 Typical Electro-Optical Characteristics Curve HRFS CHIP Fig.2 Luminous Intensity vs. Forward Current 6.0 150 Luminous Intensity Normalize @20mA Forward Current(mA) Fig.1 Forward current vs. Forward Voltage 100 50 0 0.5 0 1.0 1.5 2.0 2.5 5.0 4.0 3.0 2.0 1.0 0.0 0 3.0 50 100 150 Forward Current(mA) Forward Voltage(V) Fig.4 Luminous Intensity vs. Temperature Luminous Intensity@20mA Normalize @25℃ Fig.3 Forward Current vs. Temperature Forward Current(mA) 40 30 20 10 0 0 20 40 60 80 Relative Intensity@20mA 1.0 0.5 0 650 Wavelength (nm) 0.8 0.6 0.4 0.2 0.0 -40 -20 0 20 40 60 Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength 600 1.0 100 Ambient Temperature (Ta°C) 550 1.2 700 Fig.6 Directive Radiation 80 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/14 PART NO. LG-197RGB-C-CT-3C1 Typical Electro-Optical Characteristics Curve DGM CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 2.5 2.0 1.5 1.0 0.5 0.0 0.1 1.0 2.0 3.0 4.0 5.0 1.0 10 Fig.3 Forward Current vs. Temperature Fig.4 Relative Intensity vs. Temperature 40 3.0 Relative Intensity@20mA Normalize @25℃ Forward Current(mA) 1000 Forward Current(mA) Forward Voltage(V) 30 20 10 0 0 20 40 60 80 100 0.5 0.0 550 Wavelength (nm) 1.5 1.0 0.5 0.0 -20 0 20 40 60 Fig.6 Directive Radiation 1.0 500 2.0 80 Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength 450 2.5 -40 Ambient Temperature (Ta°C) Relative Intensity@20mA 100 600 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/14 PART NO. LG-197RGB-C-CT-3C1 Typical Electro-Optical Characteristics Curve DBK CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0.0 1.0 3.0 2.0 4.0 5.0 1 10 Fig.4 Relative Intensity vs. Temperature Fig.3 Forward Current vs. Temperature Relative Intensity@20mA Normalize @25℃ Forward Current(mA) 40 30 20 10 0 20 40 80 60 100 Ambient Temperature (Ta°C) Relative Intensity@20mA 1.0 0.5 0.0 450 500 Wavelength (nm) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength 400 1000 Forward Current(mA) Forward Voltage(V) 0 100 550 Fig.6 Directive Radiation 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 9/14 PART NO. LG-197RGB-C-CT-3C1 Carrier Tape Dimensions 4.0±0.2 0.23 2.0 1.75 - 3.5 ±0.2 8.0±0.3 1.75 5.3 0.7 1.65 4.0±0.2 + Note : The tolerances unless mentioned is ± 0.1mm,Angle ± 0.5. Unit=mm. ‧ Packing Specifications Label Aluminum Moist-Proof bag Label Part No. Description Quantity/Reel LG-197RGB-C-CT-3C1 8.0mm tape,7"reel 4000 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 10/14 PART NO. LG-197RGB-C-CT-3C1 Label Explanation LIGITEK ELECTRONICS CO., LTD. Pb BIN : Luminous Intensity PART : LG-197RGB-C-CT-3C1 LOT : GS11640168 QTY(PCS): 4000 VF:2.8-3.6 BIN/HUE : S-U-Q VF:2.8-3.6 HUE : Dominant Wavelength VF:1.7-2.6 VF : Forward Voltage Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0 ±0.5 178 ±1.5 60 ±1.0 9.0±1.0 ψ13.5±1.0 12.0±1.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 11/14 PART NO. LG-197RGB-C-CT-3C1 Box Explanation 1. 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm L W H LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LG-197RGB-C-CT-3C1 Page 12/14 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280 ℃ 3 sec one time only. 2 PB-Free Reflow Solder 1~5°C/sec 1~5°C/sec Preheat 180~200°C 260°C MaX. 10sec.Max 6°C/sec Above 220°C 60 sec.Max. 120 sec.Max. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 3.After soldering,do not warp the circuit board. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 13/14 PART NO. LG-197RGB-C-CT-3C1 Precautions For Use: Storage time: 1. Calculated shelf life before opening is 18 months at < 30°C and < 90% relative humidity (RH) 2. After bag is opened, devices which will be subjected to reflow soldering or other high temperature processes must be a) Assemblied within one years in an environment of ≦ 30°C / 60% RH, or b) Stored at ambient of 10% RH or less 3. Devices are required baking before assembly if: a) Humidity Indicator Card reads >10% (for level 2a -5a) or >60% (for level 2) at ambient temperature 23 ±5°C b) 2.a) or 2.b) doesn't meet 4. If baking is required, devices should be baked for >24 hours at 60±5°C.Performing baking only once, and using the baked devices within 72 hours.. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forward current should not be allowed to change by more than 40% of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 14/14 PART NO. LG-197RGB-C-CT-3C1 Reliability Test: Classification Test Item Test Condition Sample Size Operating Life Test 1.Ta=25°C 2.If=20mA 3.t=1000 hrs (-24hrs,+72hrs) 22 High Temperature Storage Test 1.Ta=100°C±5°C 2.t=1000 hrs (-24hrs,+72hrs) 22 Low Temperature Storage Test 1.Ta=-40°C±5°C 2.t=1000 hrs (-24hrs,+72hrs) 22 High Temperature High Humidity Storage Test 1.Ta=85°C 2.RH=85% 3.t=1000hrs(-24hrs,+72hrs) 22 1.Ta=100°C±5°C ~ -40°C±5°C 20min/ 10sec / 20min 2.total 100 cycles 22 1.100°C±5°C ~ -40°C±5°C 30mins / 5mins / 30mins 2.100 Cyeles 22 Endurance Test Thermal Shock Test Environmental Test Temperature Cycling IR Reflow 1.T=260°C Max. 10sec.Max. 2. 6 Min 22