IMC-1210 www.vishay.com Vishay Dale Wirewound, Surface Mount Molded Inductors FEATURES STANDARD ELECTRICAL SPECIFICATIONS TEST FREQ. SRF DCR (MHz) MIN. MAX. Q L&Q MIN. (MHz) () 50 30 1000 0.13 50 30 1000 0.14 50 30 1000 0.16 50 30 1000 0.18 50 30 1000 0.20 50 30 1000 0.22 50 30 1000 0.24 50 30 1000 0.27 50 30 1000 0.30 50 30 1000 0.33 50 30 1000 0.36 50 30 900 0.40 50 30 700 0.44 25.2 30 500 0.22 25.2 30 450 0.25 25.2 30 400 0.28 25.2 30 350 0.32 25.2 30 320 0.36 25.2 30 300 0.40 25.2 30 250 0.45 25.2 30 220 0.50 25.2 30 180 0.55 25.2 30 160 0.60 25.2 30 140 0.67 7.96 30 120 0.70 7.96 30 100 0.75 7.96 30 85 0.85 7.96 30 80 0.90 7.96 30 75 1.0 7.96 30 70 1.1 7.96 30 60 1.2 7.96 30 55 1.3 7.96 30 50 1.5 7.96 30 45 1.6 7.96 30 40 1.8 7.96 30 38 2.0 2.52 30 33 2.1 2.52 30 30 2.5 2.52 30 21 2.8 2.52 30 20 3.3 2.52 30 19 3.7 2.52 30 18 5.0 2.52 30 16 6.0 2.52 30 15 7.0 2.52 30 14 9.0 2.52 30 12 10.0 2.52 30 11 11.0 2.52 30 10 12.0 0.796 20 9 14.0 0.796 15 8 11.0 0.796 15 6.5 15.0 0.796 15 6 17.0 0.796 15 6 21.0 IND. (μH) RATED DC CURRENT (mA) (1) 734 707 661 624 592 564 540 530 483 470 450 450 450 584 548 518 484 456 453 450 450 450 450 450 400 390 370 350 320 290 260 250 224 217 204 194 189 173 164 151 145 122 112 104 91 87 83 79 73 70 65 60 50 TOL. 0.010 20 % 0.012 20 % 0.015 20 % 0.018 20 % 0.022 20 % 0.027 20 % 0.033 20 % 0.039 20 % 0.047 20 % 0.056 20 % 0.068 20 % 0.082 20 % 0.10 20 % 0.12 20 % 0.15 20 % 0.18 20 % 0.22 20 % 0.27 20 % 0.33 20 % 0.39 20 % 0.47 20 % 0.56 20 % 0.68 20 % 0.82 20 % 1.0 10 % 1.2 10 % 1.5 10 % 1.8 10 % 2.2 10 % 2.7 10 % 3.3 10 % 3.9 10 % 4.7 10 % 5.6 10 % 6.8 10 % 8.2 10 % 10 10 % 12 10 % 15 10 % 18 10 % 22 10 % 27 10 % 33 10 % 39 10 % 47 10 % 56 10 % 68 10 % 82 10 % 100 10 % 120 10 % 150 10 % 180 10 % 220 10 % Note (1) Rated DC current based on the maximum temperature rise, not to exceed 40 °C at +85 °C ambient • Printed marking • Molded construction provides superior strength and moisture resistance • Compatible with vapor phase and infrared reflow soldering • Tape and reel packaging for automatic handling, 2000/reel, EIA-481 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ELECTRICAL SPECIFICATIONS Inductance range: 0.01 μH to 220 μH Special tolerances available upon request Operating temperature: -55 °C to +125 °C Coilform material: Non-magnetic from 0.01 μH to 0.10 μH Powdered iron from 0.12 μH to 100 μH Ferrite from 120 μH to 220 μH TEST EQUIPMENT • HP4342A Q meter with Vishay Dale test fixture or equivalent • HP4191A RF impedance analyzer (for SRF measurements) • Wheatstone brigde DIMENSIONS in inches [millimeters] 0.087 ± 0.008 [2.21 ± 0.203] 0.030 [0.762] Typ. 0.006 [0.152] Ref. Typ. 0.040 [1.02] 0.126 ± 0.008 [3.20 ± 0.203] 0.098 ± 0.008 [2.49 ± 0.203] 0.028 ± 0.004 [0.711 ± 0.102] Typ. 0.073 [1.85] Ref. Guidelines for Parallel Component Printed Circuit Mounting Pads on IMC-1210-100 Chip Inductors 0.118 [3.0] 0.138 [3.5] 0.020 (1) [0.5] 0.118 [3.0] 0.039 [1.0] 0.070 [1.8] Note (1) Recommended spacing between components 0.039 [1.0] PART MARKING - Vishay Dale - Inductance value - Date code DESCRIPTION 10 μH IMC-1210 MODEL INDUCTANCE VALUE ± 10 % INDUCTANCE TOLERANCE ER PACKAGE CODE e3 JEDEC® LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M PRODUCT FAMILY Revision: 02-Jun-15 C 1 2 1 SIZE 0 E R PACKAGE CODE 1 0 INDUCTANCE VALUE 0 K TOL. Document Number: 34043 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000