Tool & Product Update A DAPTER A SSEMBLY S TROKE C HANGES The stroke of the 123437 series Adapter Assemblies has been changed from .437 to .500 inches. This is to facilitate single-stroke installation. A ANVIL ADAPTER .500 STROKE DRAWBAR ADAPTER A SECTION A-A The Adapter Assemblies are used to adapt Nose Assemblies to Tools as specified in the following table: ADAPTER ASSEMBLY TOOL NOSES 123437 230 99-1097, 99-1098, 99-1099, 99-1100, 99-1101, 99-1102 123437-1 202 99-1097, 99-1098, 99-1099, 99-1100, 99-1101, 99-1102 123437-2 202 99-1333, 99-1335, 99-1336 123437-3 230 99-1333, 99-1335, 99-1336 Huck International, Inc. 800-278-4825 Huck International, Inc., 1 Corporate Drive, Kingston, NY 12401 e-mail: [email protected] (845) 331-7300 08/23/2002 505