specifications ® Small form factor fiber optic jack modules shall be compliant with the TIA FOCIS-6 Fiber Jack interface specification. RJ-45 style module shall be field terminable in one module space with no adapter. The jack module shall contain a factory terminated pre-polished multimode fiber, requiring no field polishing and no adhesive. The fibers shall terminate in 2.5mm ferrules with a non-optical disconnect and typical insertion loss of 0.3dB (62.5/125µm) or 0.35dB (50/125µm) per connector. NETWORK CONNECTIVITY GROUP SPEC SHEET MINI-COM ® FJ ® OPTI-CRIMP ® Fiber Optic Jack Module — Pre-polished Crimp technical information Fiber compatibility: Fiber cable type: Ferrule type: Insertion loss: Return loss: 62.5/125µm and 50/125µm multimode versions available Tight-buffered cable only (3.0mm jacketed or 900µm) Zirconia ceramic with a pre-polished fiber stub 0.3dB typical (62.5/125µm), 0.35dB typical (50/125µm) Greater than 20dB key features and benefits Pre-polished fiber stub VFL verification during crimp process FJ interface independent free-floating ferrules Mechanical crimp cable retention Small form factor connector Proven 2.5mm ceramic ferrules Robust design Non-optical disconnect RJ-45 form factor Field terminable jack module and plug Adapterless Flush mount FOCIS-6 compliant Exceeds TIA/EIA-568-B.3 Keyed solution available Eliminates polishing steps, speeding installation Provides installer with a visual signal when optimal continuity is made and the crimp step can be performed Greater reliability; ensures physical fiber contact for consistent low return loss, unlike unitary multi-fiber ferrule connectors Consistently provides higher than industry standard cable retention; requires no adhesive, speeding installation Double the port density in one module space at the outlet and in the telecommunications room Uses standard termination tools and procedures; provides strength and reliability Protects fibers from mechanical and environmental stress Network reliability; maintains data transmission under tensile loads Familiar to end-users, snaps into all MINI-COM outlets and modular patch panels Allows assembly of special length patch cords on site Fewer components to order and inventory Unused ports do not protrude from the wall; can be used with shuttered faceplates Ensures intermatability with all FOCIS-6 compliant components Network reliability assured as defined by TIA Provides mechanical network security; limits access to highly sensitive, classified and segregated networks applications Fiber-to-the-desk: The pre-polished mechanical crimp version of MINI-COM FJ Fiber Optic Jack Module is the ultimate desktop fiber connector. Elimination of end face polishing and adhesive provides for faster installation, especially in remote areas and confined spaces. This reduces installation time over standard field polish FJ Duplex Jack Modules by 70%. The 2.5mm ferrule provides robustness required for this demanding environment. The FJ interface design is familiar to the end user and is polarized to prevent mismatch of transmit and receive cables. Because there is no adapter, unused ports remain flush with the wall and away from damage. The modularity with copper connectors allows for the complete data-communications solution to every workstation in one outlet. Keyed network security: Four color-coded, keyed configurations of the jack module and plug are available to provide mechanical and visual differentiation to prevent unintentional insertion into adjacent ports. The keyed design provides network security for military, government, financial and educational applications. A universal keyed plug is available for testing purposes. Telecommunications room: The high port density of the FJ Jack Module reduces space requirements for fiber terminations in the telecommunications room. This allows the end user to use less rack space and purchase fewer fiber enclosures. The multiple color options allow color coding of different networks or areas of the building for easier troubleshooting. *ST is a registered trademark of Lucent Technologies. V i s i t o u r w e b s i t e a t : w w w. p a n d u i t . c o m / n c g FJ OPTI-CRIMP Multimode Duplex Jack Modules 62.5/125µm: 50/125µm: FJJSMM5C** FJJSMM50C** FJ Multimode Duplex Plugs 62.5/125µm or 50/125µm: FJEPGM5C** Plug to Plug Coupler Plug to plug coupler: FJGCCEI (primarily used in testing) Replacement Ferrule Assemblies for FJ OPTI-CRIMP Jack Modules 62.5/125µm: 50/125µm: FJJSMMFRL-X FJJSMM50FRL-X X = Bag of 10 ferrule assemblies, crimp sleeves and dust caps. Multimode Duplex Patch Cords and Pigtails FJ plug to FJ plug: 3mm jacketed FJ jack module pigtail: 900µmbuffered FJ jack module pigtail: FJ plug to SC: FJ plug to ST*: FJ plug (keyed W) to SC: F^D6P-6PM‡ F^D6J-NM‡ F^B6J-NM‡ F^D6P-3M‡ F^D6P-2M‡ F^D6PW-3M‡ All key type (W, X, Y, Z) patch cords available. ^Available in 62.5/125µm (6) and 50/125µm (5). ‡Patch cords are available in 1, 2, 3, 5 and 10 meter lengths, and pigtails are available in 1, 2 and 3 meter lengths. OPTI-CRIMP Termination Tooling Termination kit: FJMVKIT To upgrade from FJKITG, purchase FJQCVR fiber cleaver tool and FVFLKIT visual fault locator kit. To upgrade from FJMKIT, purchase FVFLKIT visual fault locator kit. **Substitute for Colors: EI = Electric Ivory BL = Black BU = Blue IW = Off White AW = Arctic White Keyed Colors: WBL = Keyed W in Black XRD = Keyed X in Red YOR = Keyed Y in Orange ZYL = Keyed Z in Yellow installer tips Terminate on tightbuffered cable only. Always use FVFL Visual Fault Locator during termination. MINI-COM ® FJ ® OPTI-CRIMP ® Fiber Optic Jack Module — Pre-polished Crimp Standards Compliant Connector Performance TIA 455 Description Test Procedure and TIA/EIA-568-B.3 Required Performance Typical Performance 1 Flex 100 cycles; -180 to 180 degrees; max. insertion loss 0.75dB, min. return loss 20dB <0.2dB additional loss 2 Impact 8 drops from 1.8m; max. insertion loss 0.75dB, min. return loss 20dB <0.1dB additional loss 4 High Temperature 4 days at 60°C followed by post-conditioning FOTP-6; max. insertion loss 0.75dB, min. return loss 20dB <0.2dB additional loss 5 Humidity 4 days at 90-95% RH and 40°C; max. insertion loss 0.75dB, min. return loss 20dB max. change during test 0.4dB <0.1dB additional loss 6 Cable Retention 11.24 lbs. at 0 degrees, 4.4 lbs. at 90 degrees; max. insertion loss 0.75dB, min. return loss 20dB max. change during test 0.5dB <0.2dB additional loss 21 Durability 500 mate/unmate cycles; max. insertion loss 0.75dB, min. return loss 20dB <0.1dB additional loss 34 Insertion Loss max. insertion loss 0.75dB 0.3dB typical (62.5/125µm) 0.35dB typical (50/125µm) 36 Twist 10 cycles; 2.5 cw, 5 ccw, 2.5 cw; max. insertion loss 0.75dB, min. return loss 20dB <0.1dB additional loss 107 Return Loss 20dB minimum return loss >20dB 185 Coupling Strength 7.4 lbs. at 0 degrees; max. insertion loss 0.75dB, min. return loss 20dB <0.1dB additional loss 188 Low Temperature 4 days at 0°C; max. insertion loss 0.75dB, min. return loss 20dB max. change during test 0.3dB <0.1dB additional loss NOTE: Multimode tests performed at 850 and 1300nm. .53 [13.4] .48 [12.1] .25 [6.4] 2.17 [55.0] .25 [6.4] .48 [12.2] .26 [6.6] .71 [18.0] 1.96 [49.7] .26 [6.7] Keyed W - Black Keyed X - Red Keyed Y - Orange Keyed Z - Yellow Dimensions are in inches (Dimensions in brackets are in millimeters) For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty NETWORK CONNECTIVITY GROUP PANDUIT CANADA Markham, Ontario Phone: 800-777-3300 PANDUIT EUROPE LTD. London, UK Phone: 44 208-601-7200 WORLDWIDE SUBSIDIARIES AND SALES OFFICES For a full line catalog (SA-NC10CB01A), email us at [email protected] or call Customer Service at 800-777-3300. PANDUIT CORP. Tinley Park, Illinois 60477-3091 Customer Service: 800-777-3300 Technical Support: 866-405-6654 Email: [email protected] Website: www.panduit.com/ncg PANDUIT ASIA PACIFIC PTE. LTD. Republic of Singapore Phone: (65) 6379 6700 © PANDUIT Corp. 2003 Contact your local authorized PANDUIT distributor for pricing. For your local Sales Office call 800-777-3300 PANDUIT JAPAN Tokyo, Japan Phone: (81) (3) 3767-7011 PANDUIT LATIN AMERICA Jalisco, Mexico Phone: (52) (333) 666-2501 ALL RIGHTS RESERVED PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia Phone: (61) 3-9794 9020 Printed in U.S.A. WW-FBSP05 07/2003