EDF1A THRU EDF1D

FAST RECOVERY BRIDGE
CURRENT
FEATURES
•
•
•
•
•
•
50 to 200 Volts
VOLTAGE RANGE
EDF1A THRU EDF1D
1.0 Ampere
DFM
Glass passivated chip junction
Superfast recovery time for high efficiency
Ideal for surface mounte applications
Low leakage
High forward surge current capability
High temperature soldering guaranteed:
260℃/10 seconds at terminals
.365 (9.3)
.320 ( 8.12)
.135 (3.4)
.115 (2.9)
.165 (4.2)
.020
.155 ( 3.9)
( 0.5)
.060
( 1.5)
.350 (8.9)
.300 ( 7.6)
.205 (5.2)
.195 ( 5.0)
MECHANICAL DATA
•
•
•
•
•
Case: Molded plastic body
Epoxy: UL94V-0 rate flame retardant
Polarity: Molded on body
Leadp: Plated terminals solderable per MIL-STD-202E
method 208C
Weight: 0.04 ounce, 1.0 gram
-
+
~
~
.255 (6.5)
.245 ( 6.2)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
•
•
Ratings at 25℃ ambient temperature unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load
For capacitive load derate current by 20%
SYMBOLS
EDF1A
Maximum Reverse Peak Repetitive Voltage
VRRM
50
Maximum RMS Voltage
VRMS
35
Maximum DC Blocking Voltage
VDC
50
Maximum Average Forward Rectified Output Current,
0.06″(1.5mm) lead length at T A=40℃ (Note 2)
Peak Forward Surge Current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Rating for Fusing (t<8.3ms)
Maximum Instantaneous Forward Voltage drop
Per Bridge element at 1.0A
TA=25℃
Maximum Reverse Current at rated
DC blocking voltage per element
TA=125℃
Maximum reverse Recovery Time (Note 1)
Typical Junction Capacitance (Note 3)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
EDF1B
100
70
100
EDF1C
150
105
150
EDF1D
200
140
200
UNIT
Volts
Volts
Volts
I(AV)
1.0
Amps
IFSM
50
Amps
I2 t
10
A2s
VF
1.05
Volts
IR
Trr
CJ
RθJA
TJ ,TSTG
Notes: 1.Test condition: If=0.5A, IR=1.0A, IRR=0.25A
2.Unit mounted on P.C.B. with 0.51″×0.51″( 13×13mm) copper pads.
3.Measuned at 1.0MHz and applied reverse voltage of 4.0 Volts.
Web Site: www.hkmic.com
5.0
0.5
50
25
40
-55 to +150
µAmps
mAmps
nS
pF
℃/W
℃
FAST RECOVERY BRIDGE
50 to 200 Volts
VOLTAGE RANGE
EDF1A THRU EDF1D
CURRENT
1.0 Ampere
RATINGS AND CHARACTERISTIC CURVES EDF1A THRU EDF1D
FIG. 1- DERATING CURVES OUTPUT
RECTIFIED CURRENT
FIG. 2- MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
60
0.5
Single Phase
Half wave 60Hz
Resistive or Inductive Load
0.25
0
TJ=150℃
Single Sine-Wave
(JEDEC Method )
50
40
30
20
10
1 CYCLE
0
20
INSTANTANEOUS FORWARD CURRENT,
( A)
PEAK FORWARD SURGE CURRENT
( A)
0.75
40
60
80
100
120
1
160
140
NUMBER OF CYCLES AT 60 Hz
FIG. 3- TYPICAL FORWARD CHARACTERISTICS
PER LEG
FIG. 4- TYPICAL REVERSE LEAKAGE
CHARACTERISTICS PER LEG
1000
10
1
0.1
Tj =25℃
PULSE WIDTH=300μs
1% DUTY CYCLE
0.01
0.4
0.6
0.8
1.0
100
1
Tj =25℃
0.1
1.4
1.2
FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG
T j =25℃
f=1.0MHz
Vsig=50mVp-p
20
15
10
5.0
0
0.1
1
10
100
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE,
(%)
30
25
Tj =125℃
10
INSTANTANEOUS FORWARD VOLTAGE, (V)
JUNCTION CAPACITANCE, (pF)
100
10
AMBIENT TEMPERATURE, ℃
INSTANTANEOUS REVERSE LEAKAGE
CURRENT, (μA)
AVERAGE FORWARD OUTPUTCURRENT
( A)
1.0
200
REVRESE VOLTAGE, (V)
Web Site: www.hkmic.com
Similar pages