ABD0000C175

Plastic Film Capacitors
Stacked Metallized PEN
Film Chip Capacitor
Type : ECWU(X)
Stacked metallized PEN film as dielectric with simple
mold-less construction
Features
in size (minimum size 3.2 mm × 1.6 mm)
°C, 85 %RH, W.V. × 1.0 for 500 hours
● For reflow soldering
● RoHS directive compliant
● Small
● 85
Recommended applications
● General
purpose (Coupling, By-pass)
Explanation of part number
1
2
3
4
5
E
C
W
U
1
Product code
Dielectric &
construction
6
7
Rated voltage
1
8
Capacitance
9
10
11
J
X
5
Cap. Tol.
Suffix
Suffix
J
100 V.DC
±5 %
Code Tape width
5
8 mm
Specifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
– 55 °C to +105 °C
100 V.DC
Capacitance range
0.0010 μF to 0.010 μF (E12)
Capacitance tolerance
±5 %(J)
Dissipation factor (tan d)
tan d < 1.0 % ( 20 °C, 1 kHz )
Withstand voltage
Between terminals : Rated volt. (V.DC)×150 %, 60 s
Insulation resistance (IR)
IR > 3000 MΩ (20 °C, 100 V.DC, 60 s)
Reflow soldering : 250 °C max. and 60 s max. at more than 220 °C
(Temp. at capacitor surface)
Soldering conditions
✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Construction
Dimensions
L±0.2
Unit : mm
H±0.2
W±0.2
Element
(Stacked)
Outer
electrode
e±0.30
g
Size
code
H2
H3
G2
G3
L
W
H
e
g
3.2
3.2
3.2
3.2
1.6
1.6
2.5
2.5
1.1
1.5
1.5
2.1
0.65
0.65
0.65
0.65
> 1.0
> 1.0
> 1.0
> 1.0
e±0.30
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2016
Plastic Film Capacitors
Taping specification for automatic mounting
Refer to the page of taping specifications
Rating · Dimensions · Quantity
● Capacitance
tolerance : ±5 %(J)
Capacitance
(μF)
Part No.
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.010
ECWU1102JX5
ECWU1122JX5
ECWU1152JX5
ECWU1182JX5
ECWU1222JX5
ECWU1272JX5
ECWU1332JX5
ECWU1392JX5
ECWU1472JX5
ECWU1562JX5
ECWU1682JX5
ECWU1822JX5
ECWU1103JX5
Rated voltage 100 V.DC
Dimensions (mm)
L
W
H
3.2
1.6
1.1
3.2
1.6
1.1
3.2
1.6
1.1
3.2
1.6
1.1
3.2
1.6
1.1
3.2
1.6
1.1
3.2
1.6
1.5
3.2
1.6
1.5
3.2
1.6
1.5
3.2
2.5
1.5
3.2
2.5
1.5
3.2
2.5
2.1
3.2
2.5
2.1
Size
code
H2
H2
H2
H2
H2
H2
H3
H3
H3
G2
G2
G3
G3
Q'ty
3000
2000
cap. > 0.012 μF : Please use 100 V.DC rating of ECWU(C)
Recommended for land dimensions
Electrode
Unit : mm
C
Land
A
B
Size code
H2, H3
G2, G3
Land dimensions
Reflow soldering
A
B
C
1.8
3.6
1.4
1.8
3.6
2.3
✽ lt is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2016